My old Kawi is back!.....for a tune up. I'm glad this no start issue turned out to be very minor. Thanks for watching! Follow me on IG: @motionmx_ #kawasaki #kx250f #kx250
Like the grease on the edge I thought I was the only one that did that .
@lamarkx2259
Жыл бұрын
You are handy and a good friend. Me I would have just dropped it off in the shop and called it a day.
@andrey.poturaev
Жыл бұрын
Hi! If air filter was so dirty and intake valves clearance are too small - this all means that the engine sucked dust or sand and valve edges are worn and lost its shape. Just check valve clearance after few hours - if it gets smaller - you need to replace intake valves and maby valve seats...
@motion_mx
Жыл бұрын
Yes you are exactly right. If they get tight again soon we are sending the head off to Millenium for new seats and valves
@justincase5400
9 ай бұрын
I have a 2014 KX250F leaking fuel from the airbox boot heavy dripping, i replaced the rear injector and oring still leaking fuel any ideas would help thanks!!!
@michaelsolberg3330
Жыл бұрын
I need help with installing the wiring harness please I beg
@c4r5on88
Жыл бұрын
I can push my kick start down easily with almost no resistance and yours looked to have good resistance. I was told its from auto decompression. Now after seeing you kick yours I'm questioning mine 😂
@motion_mx
Жыл бұрын
So I have noticed on the kawis the resistance is very light compared to other bikes. Even with the valves spot on I can do by hand just like you said. But I will say it was extremely light since the valves were out of wack 😂
@c4r5on88
Жыл бұрын
@@motion_mx well mine has just decided it no longer wants to start so looks like my shims need doing now too 😂
@Sir_Wilo
Жыл бұрын
Hate when people domt admit their mess up. Not too hard to admit he dumped it in water lol
@delawareadventures3612
Жыл бұрын
Hey man recently just picked up a 2007 kx250f and I’m running into the same problems with it not starting but don’t have the tools for me to do it myself if your local to me would you be willing to check it out?
@motion_mx
Жыл бұрын
I’m located in northern IN
@delawareadventures3612
Жыл бұрын
@@motion_mx ah man a little to far of a drive for me but I did get it to start but just bump start doesn’t wanna kick over previous owner said has a high compression piston in it should I do a valve adjustment or what do you think I should do?
@motion_mx
Жыл бұрын
@@delawareadventures3612 yea definitely adjust the valves. If you find yourself adjusting valves soon again that means the valve seats are wearing out and you’ll have to send out the head to have new seats cut. Anytime you hear popping in deceleration, no start issues (starts only on bump start)…it needs the valves adjusted more than likely. You can also have air leaks which is a good thing to double chdck
@Allproautoglass
11 ай бұрын
Where you located so i can take you my bike for a tune up
@motion_mx
11 ай бұрын
Northern IN
@dpayne8611
Жыл бұрын
Kawa isnt the same anymore, they used to be super reliable but not these days 😕
@jamesc6137
Жыл бұрын
What year is that bike? Thx
@motion_mx
Жыл бұрын
2012
@jamesc6137
Жыл бұрын
@@motion_mx thx. I have an 11. Just starting to take 20 kicks or so to start. Never had a valve adjustment lol….but only about 10-15hours of total use
@motion_mx
Жыл бұрын
@@jamesc6137 definitely check the valves. This bike also has about about 10 hours of ride time since last valve adjustment. My thinking is the valve seats are worn and valves are getting tight too fast
@Jacobsatorius
Жыл бұрын
Hey what year is the bike?
@motion_mx
Жыл бұрын
2012
@OFFROADBANDITS
6 ай бұрын
I have a kxf250 and it won’t start but it’s got compression it’s got spark and it will kick in for 2 seconds anyone got a idea people
@motion_mx
6 ай бұрын
What do you mean it will kick in for 2 seconds?
@OFFROADBANDITS
6 ай бұрын
@@motion_mx literally 2 seconds mate then it dies again
@captinawesome15max13
6 ай бұрын
@@OFFROADBANDITS I am not a mechanic at all. Just started working on my bike because the rod broke but from what I've read and looked into a small tiny bit that could be a vehicle down sensor I think there was a a couple years where it was a common malfunction wont hurt to look into. For all anyone wanting to get mad I am just offering a possibility and in no way think this is the only reason it happens.
@OFFROADBANDITS
6 ай бұрын
@@captinawesome15max13 nice one mate I’ve just had the new fuel pump delivered the whole assembly is that where the sensor is ?
@captinawesome15max13
6 ай бұрын
@hotboxclipz on my 2011, it's halfway up the middle of the radiators directly in front of the outlet of the gas pump. And like 6 or 7 inches up from the start of the exhaust header. It's held to a piece of the from with rubber
Пікірлер: 31