Based on my experience, I believe that bi-wiring does not significantly affect sound quality. The signal is still transmitted in the same way, regardless of whether you connect the high frequencies (HF) and low frequencies (LF) to separate terminals, or use a diagonal wiring method. However, bi-amping can potentially improve sound quality. This is because you can use two different amplifiers, each optimized for a specific frequency range. For example, you could use an amplifier that is good at reproducing midrange and high frequencies for the HF terminals, and an amplifier that is good at reproducing low frequencies for the LF terminals. I also spoke to an engineer from a UK HiFi brand, and he mentioned that it is difficult to say definitively whether bi-wiring has any benefits. He said that there is no evidence to suggest that it can improve sound quality, but more research is needed.
There is a common misconception that the material of speaker wire affects the sound quality. Some people say that silver wires produce a brighter sound, while copper wires produce a warmer sound. However, this is not true. In blind listening tests, people have been unable to reliably tell the difference between speaker wires made of different materials. The only factor that significantly affects the sound quality of speaker wire is the wire gauge. The AWG value is a measure of the wire's thickness. A lower AWG value means a thicker wire. Thicker wires have less resistance, which allows them to carry more current and deliver better sound quality. For most home audio applications, a 14AWG wire is sufficient. However, if you are running speaker wire over long distances or you have high-powered speakers, you may need to use a thicker wire. But different meterial , resistance also different , example 14AWG copper wire if is 100w, than silver wire need 12AWG to carry 100w, personally guess this is the one of the root casue to confusing people to lead the people misunderstand, or becasue of silver color is "Cold" color, so feel that the sound should be brighter
@tunelomo4592
2 жыл бұрын
HK 玩音响人又講導線點點,实属老土兼迷信。影响喇叭綫的电阻只有三因素:电綫物料 即电導率或电阻率,电线的長度,横切面的面积,即粗幼。少講玄虛,請勿誤導。当然 兩通电導線靠近空間形成电磁场,這是另回事,空内传輸長度有限,非十万八千里对綫 的电流的影响,例如頻率,即高低音等,不必誇大。大款亦不要花怨枉錢買乜神奇導線。
Bok 哥I’m using MA GX300, pre-out from Denon 3700H to Accuphase P-350. Which model of Kimble Kable is best suit my setup. 4PR, 8PR, 4TC or 8TC? Accuphase P-350 have 4 pair of connect - Speaker A &B. Should I use 4-4 bi-wiring and select A+B on the front panel of P-350?
@brotherbok
Жыл бұрын
If your amplifier has A + B function. It depends on whether it has the function of bridge.
bok 哥, 您好! 想买这个kimber 8PR Single wire ..您有任何康头吗?谢谢😅
@brotherbok
2 жыл бұрын
@@kennethchew1244 你可以私聊我。😁😁
@kennethchew1244
2 жыл бұрын
如何私聊,有联络资料吗?
@邱垂麒
Жыл бұрын
請問跳片因潮濕而生銅綠,可以拆下除銹拋光嗎? 謝謝
@brotherbok
Жыл бұрын
可以,但這就說明你的跳片不是無氧銅,建議換成品質比較好的跳線
@彬哥-e5v
Жыл бұрын
實用!
@brotherbok
Жыл бұрын
🙏🙏
@ninetune5639
Жыл бұрын
bok哥解釋易懂又詳細,看了好多其他的,都不懂在講什麼😜😜
@brotherbok
Жыл бұрын
😊😊🙏🙏謝謝你的支持🙏🙏😊😊
@antsaint587
2 жыл бұрын
hi brother, I am using JBL Studio 590 floor standing speaker. Thinking of buying the Audioquest speaker cable (2 in 4 out) but not sure what model to choose (found so many different models online). Do you have any recommendation ? Any idea on the price and any chance of getting better deal through you ?
(以下假設:Y插失真比蕉插小) single wire的話,建議喇叭線使用Y>蕉,跳線使用Y對Y,如此一來高低音電流經過蕉插的次數一樣,且都只有一次,理論上得到的訊號最接近且失真最少。當然廠線很少有賣Y>蕉(印象中只有VDH有出過),那折衷就是喇叭線使用蕉>蕉,跳線依然使用Y對Y,這樣雖然會多經過一次蕉插,但至少高低音經過的次數還是一樣,非必要不要用Y對蕉或雙蕉的跳線,因為這樣一來高低音經過蕉插的次數就會不一樣,失真就有可能不一致。 當然以上都是假設你相信Y插真的比蕉插好、廠線真的比捲線好的前提,至於到底是否為真就不在討論範圍了。
@kira5348
3 жыл бұрын
Bok 哥,你好嘢👏👏👏👍👍👍
@brotherbok
Жыл бұрын
🙏🙏🙏
@liewlikun4677
3 жыл бұрын
Bok 哥,我用着 MA Silver RX6,有一点心痒痒想换 Wharfedale Evo 4.3 ,但是没有亲身体验过4.3的声音. 你可以给一点意见吗?
Пікірлер: 162