Excellent. You can now use your rc's to alter and dig out the adventure course 😎 👍🏼
@R.C.A.D.
3 жыл бұрын
😁👍👍 yeah man, although it would be a insanely slow process,😂 Need a team of RC loaders to actually get anything done in a timely fashion,😁 Thanks for your Awesome Comment, and for checking out the video Mark.😊🤜🤛
@STP_RIDGELINE
3 жыл бұрын
Ooooh dang looks Fun 🤩 fitting for your course awesome unboxing 🙏❤️💯👍👊🇺🇸
@R.C.A.D.
3 жыл бұрын
Thank you Ridgeline 😁👍 It's a fun little machine to be sure, kinda makes you feel like a kid again, except with better toy's,😊👍👍 I can't wait to get it out this summer, it should be fun,😁 Thanks for your Great Comment, and Compliments, and many more for checking out the video Brother.😁👍👍🤜🤛
@gabrielpichardo1492
2 жыл бұрын
Im glad that they actually named it instead of just calling it a number
@R.C.A.D.
2 жыл бұрын
😁👍 likewise... The Huina numbers are hard to keep in the memory bank's, especially if you have a few different models.😂 Lol I or we have a 1550 excavator, 1580 excavator, 1593 excavator, 1583 tipper truck, then the Legendary Buckster loader, and a legendary tipper truck, as well as a Tamiya Volvo A60H tipper that I haven't built yet.😂 lol Too many numbers to keep track of.😄 Thanks for your great comment and for checking out the video my friend. 😁👍🤜🤛
@gabrielpichardo1492
2 жыл бұрын
@@R.C.A.D. you’re welcome bud! My wife just bought me a huina excavator but i dont see where it sais the model number anywhere
@R.C.A.D.
2 жыл бұрын
Nice on the excavator 😁 As for model numbers; 🤔 😂 Lol.. That's one of my complaints about those machines, no model numbers stamped anywhere in plain sight.😕 When I first bought my Huina 1550 excavator, I bought it "as is" from a store called Merchandise Outlet, and it was basically just the machine, the transmitter, along with the battery & charger, sitting on a shelf with absolutely no packaging,😕 All it had was a price sticker for $14.99 stuck to the bottom of the excavator.😂 lol Anyways, It was my first piece of RC construction equipment, and also my first Huina experience, And it took me weeks to figure out exactly what machine I had purchased,🤔😄 lol It took ton's of KZitem videos, and hours upon hours, of "online RC excavator window shopping" before I finally figured out that it was a 1550.🙄😂 Huina definitely needs to put some kinda model numbers on there machines. 😄👍 Now I can't quite be sure on this (as it's been a while since I looked) but I believe that they might have a model number stamped on the excavators motherboard,🤔 "which is on heck of a place to hide it" 😂 lol Yeah I can't quite remember, but I think that it might be stamped on one side or the other, on the main motherboard.😕 Funny fact; My Legendary Tipper Trucks "motherboard" actually has a Huina stamp on it.😂 Ha ha ha lol And I'm pretty sure that the "Buckster's" motherboard, says the exact same thing. 😄 As for your excavator; What does it look like ? Is it Cat Yellow or Kawasaki Green ? Does it have Plastic Tracks or Metal ? Does the excavators Cab look scale to the machine, or does it look smaller than the rest of the machine ? Are the boom arm's Plastic or Metal ? Are the boom arm's "Worm Gear" Screw Servo Drivin, or are they Gear Drivin internally ? Is the excavators battery a 7.2v nicad, or a 7.4v lithium polymer ? Then there's the transmitter... And what it looks like ? 😄
@jeffwalsh4613
3 жыл бұрын
No! Thankyou 4 responding! The chains do work in the front on my other 2 loaders that same size but not Legendary red make. U might want to try me. Jeff
@R.C.A.D.
3 жыл бұрын
Oh! 😕 Right on,😊👍 I was thinking that it looked kinda tight at the lowest point of the fender, but if it works it works.😂👍👍
@mcq31mc
3 жыл бұрын
Never knew this stuff existed. Looks like fun.
@R.C.A.D.
3 жыл бұрын
😁👍 Good Times for all Ages,😊 All kinds of fun to be had, especially if you are a big kid like myself,😂 I used to wish for stuff like this, when I was a kid back in the late 80's,😁 and now at 46 year's old, I finally get to see the wish come true, 😂 Lol Thanks for your Awesome comment, and many more thanks for taking the time to check out the video my friend.😊👍🙏🙏
@jdsrcs8061
3 жыл бұрын
Hahahahahahaha that was cool!!! Picking up RC's with other RC's is the AWESOME!!!! Now you need to build a trailer to load!!!
@R.C.A.D.
3 жыл бұрын
😂👍 lol well I actually do have a trailer, but unfortunately, I didn't think about it until I was editing the video,😕😂 Hindsight is 20/20! 😂 Lol Thanks for your Awesome Compliments, and for checking out the Lengthy video Juan,😊🙏🤜🤛 And I Wish you and your family all the Best going into the new year my Brother.😊😎💯🤜🤛
@jdsrcs8061
3 жыл бұрын
@@R.C.A.D. Right back at you and your fam to brother!!!🤘🤘🤘
@R.C.A.D.
3 жыл бұрын
😊😁👍👍
@adelfogutierrez317
3 жыл бұрын
Awesome rig,great video like always 👍👍
@R.C.A.D.
3 жыл бұрын
😊🙏🙏🙏🙏🙏🙏🙏 Many Thanks Adelfo,😁👍 And many more thanks, for taking the time to check out the video my Brother. 😊😁🤜🤛
@TeriWilde
3 жыл бұрын
That's a cool RC Loader, the embossed box is a nice touch.😀 I was thinking if you made the final push rod on the bucket a bit longer it would improve the bucket roll better but you did that small Mod👍 It's a shame the rear drive isn't as strong as the front drive but maybe that's a Mod for the future.😉 When you tipped over the trax Bronco and lifted the hydro plainer, I couldn't stop laughing... so cool.. 🤣 I installed new electrics and set up a real heavy weight, hydraulic German Magom wheel loader for a friend, I think they're about $3000 😲 Thanks for the unboxing and review Jim... I wish you and your family a very happy and healthy new year. 🧑🤜🤛👩
@R.C.A.D.
3 жыл бұрын
😂👍👍 lol Thanks Teri, And the loader has some serious potential I'm thinking,🤔😊 It needs a faster Steering setup, and some kind of fix for the "moa" axles,🤔 I'm thinking, that it's going to need a complete overhaul, "Custom axles and hobby grade electronics" 😁 but ahh,🤔😕 at the same time, "if it ain't broke, don't fix it" also applies,🙄 just because, it's not my actual Vehicle, and belongs to my brother, so modifying it like that would require his consent,😁👍 lol but doing little things, like the "adjustable bucket linkage", is always Free game for me, 🙄😕 And Speaking of that, Has that already been done on KZitem ? 😕 I wasn't sure,🤷? I haven't done any KZitem research on any of these Loader's,😕 I did do a video, on how to make the bucket linkage, last night, But I haven't edited it yet,🤔 Has someone already done that mod on KZitem ? 😕 If so, then I might not bother going through the motions with the "how to video" 😕 And I would absolutely love to have a full line of Hobby Grade Hydraulic RC Construction Vehicle's,🥰 That would be so.... Cool 😁👍👍 And Many Thanks for your New Year's wishes,😊🙏👍 I wish nothing but the Best for you, and your family as well Teri,😊 And many more thanks for checking out the video my friend.😁😊🤜🤛👉🥇👈
@TeriWilde
3 жыл бұрын
@@R.C.A.D. I haven't seen anything on the Laegend Wheel Loader, in fact, I'd never heard of it before your video... I see things and it makes my mind work and I go into "how could I make that better" so it would be great for you to show how you did the bucket linkage.... The Magom RC machines I've worked on were a whole new level which was a big learning curve for me. they are HEAVY DUTY... we're never too old to learn 😊
@R.C.A.D.
3 жыл бұрын
Your a lot like me, with how you look at things Teri,😊👍 🤔 Like hmm, I can I make this better, kinda frame of mind,😊😁😂🤜🤛 I knew that I liked you for a Reason Teri 😊👍👍 lol
@TinylandsRC
4 ай бұрын
nice!!🤩
@carloshnunez
3 жыл бұрын
Very nice loader I think will math with the 1/18 scale WPLs
@R.C.A.D.
3 жыл бұрын
😊👍 Possibly Thanks for your Great Comment, and for taking the time to check out the video Carlo.😁🤜🤛
@king82rc36
2 жыл бұрын
Just were mine for the snow I'm gonna stud the front tires
@R.C.A.D.
2 жыл бұрын
😁👍 Good idea
@ErPirataRc
3 жыл бұрын
Beautiful buldozer rc 👍👍👍
@R.C.A.D.
3 жыл бұрын
😊👍👍 Thank you my friend 😁🤜🤛
@ziggyzbeak
3 жыл бұрын
You guys have the makings just need to beaf it up ,and I know you will. You have to much fun cheers my friend.
@R.C.A.D.
3 жыл бұрын
😁🤜🤛 Yeah man! The loader will definitely be getting some "RCAD" work bench mods,😂👍 lol But it's gonna have to wait in line,🙄😂 lol and it's also going to require my brothers permission,🤔 Unless I get my own loader and modify it first,😕😂 P.S. we are still waiting for my brothers mystery RC Vehicle to show up,🙄 it was supposed to be here, around the same time as your purple Gen 8,😕 and we are still waiting for it,☹️ I'm thinking that it might be a Traxxas product,🤔 since they seem to be one of the biggest backordered products at the moment,😕 Anyways,😂 lol we are still waiting for it,🙄 Thanks for your Awesome Compliments Terry,😊👍 And many more for checking out the Lengthy video my Brother.😊🤜🤛
@ziggyzbeak
3 жыл бұрын
@@R.C.A.D. Put your trax on the loader LOL . Wonder what our brother got the mystery truck I mean, Talk to you later bro. CHEERS
@R.C.A.D.
3 жыл бұрын
😁👍👍 Traxx on the loader,🤔 hmm Possibly 😁 And the mystery truck,🤔? Between you and me, I think that it might be a Traxxas Slash 4×4 VXL,😕 but that's just a guess 😁👍
@satorrotas
3 жыл бұрын
Well, as I said in my answer to your comment on the 1550, I find this Laegendary Buckster really great, it is certain that it would need some upgrade, especially for the tires, well that's my opinion, real softer tires would be excellent for him, in any case this little work with the link adjustment you made for the bucket is excellent. With the comparison between the excavator and the loader is good, we can see the difference, it seems to me that the 1580 is bigger.
@R.C.A.D.
3 жыл бұрын
😁👍 I agree, the Buckster is great, but it certainly could use some Upgrades, Tires for sure 👍 Same thing with the axles, they need a little bit of work, in order to actually get some power to the ground, But all in all, it's still pretty fun just how it is,😁👍 And thank you for the bucket link Compliments,😊 That was it's first "Must have" Upgrade 😁👍👍 lol And yep the 1550 is slightly smaller than the Buckster, but in the world of excavators, that's not exactly uncommon,😕 they do make all kinds of "mini" full size excavators,😁👍 I can't wait to get the 1580, so that I can line them all up for a proper size comparison,😊🤜🤛 Thanks for your Awesome Compliments mate,😊🙏🙏 And Many more thanks for your Awesome Channel Support Pascal, You truly are #1 my friend 🥇🏆😊
@satorrotas
3 жыл бұрын
@@R.C.A.D. So I can't wait to be in the spring to see the work in your scale park with this Buckster 😊 And also to see the 1580 that you will receive 😊
@R.C.A.D.
3 жыл бұрын
Me too mate! 😁👍 I'm all kinds of Geeked up to get the 1580,🥰 as well as getting the Buckster out onto Terra Firma,😁👍 I'm gonna need to get a Semi truck, and a low boy Trailer next,😂 lol "shaking my head",😁 And the 1550 excavator will be out there to,😁👍 after upgrading the servos, it's quite the Digger,😊👍👍 It actually has more digging power then it can handle,😕 😂 Lol and fyi, I wouldn't recommend the metal boom arm's for the 1550, there's no way to Compensate for the extra weight of the metal arm's, The servo worm gear units, add a bunch of weight as it is, and that's tough to compensate for,🤔 but adding the metal arm's, would add some Serious Insult to injury, for weight Compensation,😕 And I would also recommend upgrading the Excavator's turn table, and corresponding servo, between the Added weight on the main boom from the worm gear servos, and added weight on the chassis to compensate for the Boom arm, and the added weight of getting a full bucket of dirt, The stock plastic turn table gear, and weak servo, can't really handle it,🤔😕 need to go full metal on the turn table, and I didn't go that far with my 1550, But I can honestly say that it needs it,😊👍
@satorrotas
3 жыл бұрын
@@R.C.A.D. Another person also told me to change and upgrade the excavator's turntable, so that it rotates 360 ° with a good servo and the aluminum gears, I looked on aliexpress, it's really cheap and I will also order it, I would like to have all the upgrades before disassembling everything, because it will be better, at least the work will do completely 😊
@R.C.A.D.
3 жыл бұрын
@@satorrotas Yes sir, that's a very smart move.😊👍👍
@monkeyonahumpingpost
3 жыл бұрын
I wonder if putting the tire chains on the front wheels would work better since they seemed to not give up on pushing quite so easy. Loved the music during the RC stacking portion. I giggled.
@R.C.A.D.
3 жыл бұрын
Thanks Drew,😊🤜🤛 As for the tire chains; Here's my thought on it, and this is only after figuring out what type of axles that it has,😕 which are "MOA'S" which stands for Motor on axle, and it's very similar to the little wltoys that I gave to Jim's daughter Coralyn, The axles slip when they experience any kind of drag, front or rear, doesn't matter which one,🙄 So in "theory" having the chains on the back tires was actually giving them good Traction, which in turn was causing too much drag for the rear axle to spin,🙄 vs the front being unchained, with hard compound tires, so it was very easy to spin the wheels, but I can honestly say, that it doesn't take much to stop the front axle either,😂 lol it's a terrible set up, and is designed to keep kids from stripping out Transmission gear's, 😕 But it's very counter productive for getting a bucket full of material, 😂 So basically, the front and rear axles are not connected, and are essentially the same design, They are completely divorced with there own separate motors,😕 so if I put the chains on the front, the front axle would be getting too much Traction, and would start to slip instead,🙄 it's a real bummer 😕 and I think that the only remedy, is a different set of Custom axles,😕 It's a Fun little loader, but those cheap moa axles got to go,😊👍👍 Thanks for your Awesome Compliments, and for checking out the video Drew,😊👍👍🤜🤛 And I Wish you, and your family, all the Best going into the New Year as well, And also looking forward to seeing you out on the Adventure Course this summer.😁👍👍
@monkeyonahumpingpost
3 жыл бұрын
@@R.C.A.D. that was the other thought I had. MOA is "weak" and an anti-strip was in mind for the gears. Still a cool loader and yes I would like to get there for more adventure course play. Happy new year to you and your family.
@R.C.A.D.
3 жыл бұрын
😁🤜🤛
@jeffwalsh4613
3 жыл бұрын
I ordered extra tire chains from Legendary for my 2 loaders. I think with the weak rear tire link up it's a must have 4 these. Jmo thanks 4 the video bud
@R.C.A.D.
3 жыл бұрын
😁👍 That's Cool ! Fyi, your gonna have to trim the lower section of each front fender off, in order to properly clear the chains,👍 At least that's what I was thinking, when I first installed the chains on the rear tires,😕 I was thinking that Legendary should have included 4 chains, and if they did, The front lower fenders would need to be trimmed,😁😂👍👍 The Real problem with all of these little Loader's, is the way the Front and Rear Axles slip, or essentially "stall out" when under any kind of drag,🤔 It doesn't necessarily slip like a slipper clutch, but rather, acts more like a Brown out, with the power going to the motors,🤔 like they aren't getting enough Juice ⚡, to really power them efficiently,😕 To me, that is a major drawback, and problem, that needs to be solved,🤔 If it actually drove like it should, it would be a Great Little RC loader,😁👍 Don't get me wrong, It's still a great little machine, but it could be a little better, as far as the drive train is concerned,😁👍👍 Thanks for your Awesome Comment, and Compliments Jeff,😊👍 And many more thanks for checking out the video my friend.😁🤜🤛
@masonleishman2179
3 жыл бұрын
So sweet!!
@R.C.A.D.
3 жыл бұрын
Thank you Mason,😊🙏💯 It's definitely a fun machine, Only problem is those darn Cheap MOA axles,🙄☹️👎 RC manufacturers need to Stop using those things,🤔 This loader could be a Seriously good machine, if it had a good drive train that could get the power to the ground,🤔 😕 but the cheap "P.O.S" Motor on axle setup, is Seriously holding it back,😒 which is a Real Bummer! Big Time Bummer 😞👎 Otherwise though, it's definitely a Quality machine that offers all kinds of Fun! 😁👍👍 Thanks again for your Great Compliment, and many more thanks for checking out the video my friend. 😊😎🤜🤛👍👍
@rcrelatedstuff6092
3 жыл бұрын
That is a great machine with so many possibilities for upgrades. I have a Liebherr Mining Ed which is more or less the same as yours and also the Huina 583. Have done alot of mods on mine and once you have dailed it in it performs really well. If possible I would like to see a video from you where you upgrade the drive motors to either 260 or 370 motors :)
@R.C.A.D.
3 жыл бұрын
😊 I'm glad to hear that they are great machines, as this is the first one on my channel,😁🤜🤛 I personally believe that it's got some serious potential, At least for what it is, all things considered, 😕 it's definitely not a Hydraulic Rc4wd front loader, 😂👍 But I think that it has some Great potential, to be a Good, Hardworking, little machine,😊👍👍 I haven't personally researched any KZitem Upgrade videos for them as of yet,🤔😕 so until I actually take the loader apart, I can only speculate on how to fix the issues,😊 "Mainly the "Moa" axles, and the slow steering rate," 😁 And possibly some different tires,😊👍 But my main concern is the drive train slippage,🤔 That's a Serious Fun Governor 😕☹️👎 I would like to put some "Rc4wd" (rock crawler moa) axles on it personally,😁👍 It would take some rigging, but it would probably be the best thing for beafing it up, 😁👍👍 Well see, I'm gonna have to take it apart and see what's going on,😕 which is going to require my brothers consent, 😊👍 Thanks for your Awesome Compliments, and Comment, as well as, taking the time to check out the video,😊🙏🙏 Very much appreciated my friend. 😁😎🤜🤛
@rcrelatedstuff6092
3 жыл бұрын
@@R.C.A.D. Yes, they sure are great machines for the money. As mentioned I have done a few minor upgrades on mine and you can see those videos on my channel. This is what I have done so far: - Grinded away the midsection of the tire to make it softer and give better traction - Grinded away the fins inside the wheel which enable the tire for conform much better to the surface. I also added wheel weights. - I found that the motors are really weak so I removed one of the counterweights in the rear which helps alot since the rear motor now gets some more power. In the stock for it often spins on the front wheels and just stops on the rear ones and this can partially be remedied by removing some of the weight from the rear. - Added a longer rod for the bucket just like you did - Relocated the battery to the top rear section of the truck (where the counterweights are located) and I also removed the screws from this section so that you easily can get access to the battery. Regarding the slow steering mine is already upgraded from the factory with faster steering but there are faster steering servos to be purchased. See link for an example of this: www.wuehlbox.ch/en/huina-583/223-fast-silent-servo-steering-gear-huina-583.html The most annoying thing though is the fact that the bucks doesn't`t sit flat on the ground. It did that on the V.1 and V.2 but on these never version it doesn`t. Really strange.
@R.C.A.D.
3 жыл бұрын
Hmm,🤔😕 I'm gonna have to check out your channel Brother,😁👍 And I had no idea about the different version Buckster's,☹️ How about the Huina 580 excavator vs the Huina 593 vs the Top Race 580 excavator,? Got any information on which one is the best bang for your buck, ? 😕 I have a modified Huina 550, but was looking for something with a better building platform, Supposedly the 580 is the one to get, but man, I really like the 593,🥰😁👍 Any idea as to which one I should Purchase ? 😁
@R.C.A.D.
3 жыл бұрын
I just checked out the link, 😊👍👍 And now I have a good idea at what I'm looking at under the hood, Thanks man.😁🤜🤛
@rcrelatedstuff6092
3 жыл бұрын
@@R.C.A.D. Well, dont expect to much from my channel. It does not contain no where near as good videos as you have :) Regarding the different brands, Legendary, Huina, FM Electrics, Amewi, Top Race etc they are basically all the same except for some minor tweaks with different color schemes and some other small differences. I have for example a FM Electrics loader which is basically a white version of the Huina 583 (just like yours is an orange version of the Huina 583) The latest version of this loader is the Huina 583 V4 and I would think that your loader is very similar to this version. What differs between the versions (v.1 - v.4) is differens servos, motherboards etc. Regarding excavators I agree that the Huina 593 looks very good and this is an upgrade version of the Huina 592. 593 is pretty strong and is a good value for money but if really want some digging power I would def suggest the 580. This is all metal and has plenty of power for being a "toy grade" excavator. I have a 580 and I love it.
@marcschneider1784
3 жыл бұрын
search the FM liebherr L566 pro oder the Huina 1583 V4. That are the same one but with quicker stearing
@R.C.A.D.
3 жыл бұрын
😊👍 will do Marc And we actually ordered a higher speed steering servo slash motor slash gearbox, for this one a few months ago, it's been sitting here in the Loader's bucket for the last few weeks,😂 I'm loaded down with projects at the moment, and haven't had a chance to get it installed as of yet.🤔😕😂 Thanks for your Great suggestion, and for checking out the video my friend.😊👍🤜🤛
@rickiejones9229
2 жыл бұрын
It’s the same as the Hunia, just different branding..
@R.C.A.D.
2 жыл бұрын
Yep, and in more ways than one too,😕 I wouldn't doubt it if it's using Huina circuit boards as well,😕 I noticed that when I was working on my Leagendary Tipper dump truck, The motherboard had a Huina stamp on it.😂 lol So yeah... 🤔 Might be better off just going with the Huina from the start.😕 Thanks for your great comment, and for taking the time to check out the video my friend.😁👍
@bair24
3 жыл бұрын
How high does the bucket clear? My dump truck is almost 11in to the top of the bed rail, would love to get one if it would dump in the truck thanks.
@R.C.A.D.
3 жыл бұрын
Give me a minute and I'll go measure it for you my friend.😊👍👍
@R.C.A.D.
3 жыл бұрын
With the bucket up all the way and sitting level, it measures 7.5 inches to the bottom of the bucket,🤔 Not very high,😕 and it's safe to say, that it's the exact same with the Huina loader as well, 🤔 You are going to need a dirt ramp for loading up your dump truck,😕 which isn't entirely unheard of in the real world,🤔 Yes pretty much every loader can make the stretch in the real world, but it's also very common to see a dirt loading ramp on most construction sights, and or topsoil screening operations,🤔 I know that for a fact, I used to screen topsoil at one point in time,😊👍 using a Maccolski Brothers MC112B topsoil screener, A Caterpillar 924G front loader, and a Caterpillar D5C bulldozer, So you can trust me on what I'm saying to you,👍 Although usually, the only reason that we would be using a dirt loading ramp in the real world, would be so that the loader operater can see the inside of the dump bed, while he's loading it up, 😕 dump trucks come in all sizes, 3yrd, 5yrd, 7rd, 10yrd, 15yrd 20yrd, and then of course short doubles, and the full size Gravel train's,😕 Lots of different sizes 🤔 So once again, using a loading ramp isn't out of the ordinary.😊👍👍
@bair24
3 жыл бұрын
@@R.C.A.D. Thank you for the info I appreciate it.
@R.C.A.D.
3 жыл бұрын
No problem my friend.😊👍
@doomracing5527
3 жыл бұрын
What ball ends did you use to fix the bucket dump?
@R.C.A.D.
2 жыл бұрын
🤔 hmm I can't recall what size they were off the top of my head, but they were pretty fat 😕 I think that I might have done another video specifically on that mod as well 🤔 but it's been awhile, Anyways I'll look into it for you and try to get back with you on it.😉👍 Otherwise Many Thanks for your Great Question and for checking out the video.🙏 And please except my most sincerest apologies for the late reply, you're comment, along with well over 1,000 other comments, were previously missing in action for awhile, and then magically appeared yesterday evening out of the clear blue sky.🙄 It's Nutz! Anyways... Thanks again my friend.😊👍🤜🤛 Sincerely Jim C. Of R.C.A.D. 11/7/21 8:19am
@jdpaslRC
3 жыл бұрын
How is your Sledgehammer truck???
@R.C.A.D.
3 жыл бұрын
😊 The Sledge Hammer is 100% percent intact, all together in perfect working order, and sitting back on the shelf, enjoying it's second Retirement,😁🤜🤛 I did a video on it's Car Accident Recovery, but haven't posted it yet,🙄 I honestly didn't think, that anyone would care enough about it, to be interested in its condition after the Accident,😕 Especially since the Car Accident video had hardly any views, Same thing with the old Hornet,😕 I've got another Video about that too,🤔😕 Although, If things get slow over the winter, I'll probably upload both videos just to have something to Upload,😂 lol 👍👍 Right now though, I have a pretty big supply of more important interesting RC's to get uploaded,😊👍 Thanks for your Awesome Question JDP, and of course, much Obliged for taking the time to check out the Legendary Buckster my Brother.😊😎🤜🤛👍👍
@jdpaslRC
3 жыл бұрын
@@R.C.A.D. Awesome man, I just got Kyosho Inferno GT2 nitro with Dodge Challenger body. another rig is on way too. Kyosho Nitro Tracker. RCFL.
@R.C.A.D.
3 жыл бұрын
😁👍👍 Man, you got some toys Brother,😊🤜🤛 I gotta say, that if we were little kids, I would be Wide eyed 🤯 admiring your collection,😊👍👍 I like your style man! 😁👍
@The-Warm-voice1359
3 жыл бұрын
we needs bobcat from huina?
@R.C.A.D.
3 жыл бұрын
I Agree 💯% 😁👍 or better yet, a ASV tracked skid loader, vs a bobcat,😊👍👍 "Asv's" are Awesome! 😁 Thanks for your Great Comment my evil filled friend,😊👍 and many more thanks for checking out the video Brother.😁😎🤜🤛
@The-Warm-voice1359
3 жыл бұрын
@@R.C.A.D. np my mate yeah that what's up i l😘ve huina construction but i'm hydrauluc fun much well thx again buddy ..cheers.🍺
@R.C.A.D.
3 жыл бұрын
😁🤜🤛 👉👉🏆👈👈
@The-Warm-voice1359
3 жыл бұрын
@@R.C.A.D. hey bud look i think after huina you need hydraulic like earth mover 870k or excavator or bulldozer pla pla pla when if you use one of them you will forgot huina l😂l
@R.C.A.D.
3 жыл бұрын
I hear that,😁👍 The only problem is, that I'm not Rich 🥺 and Fully Hydraulic RC Construction Equipment is Stupid Expensive! 🤑💰 Way........ out of my price range ☹️🥺 But if for one day they decide to drop the price by 50%, I would be all over it,😂😁👍👍 lol
@terrellscaife2411
3 жыл бұрын
I am super jealous of your toy but what does it cost anyway
@R.C.A.D.
3 жыл бұрын
My older Brothers new toy! So I'm super jelly too! 😂 How much did it Cost ? That's a good question 🤔 Of course, Prices do Veri! My brother ordered it online from Amazon, and I believe that it was around $300.00 usd, 🤔 but I have seen them on other sites for around $260.00, so it depends on where you shop.😕 Thanks for your great question, and for taking the time to check out the video my friend.😁🤜🤛👍👍
@terrellscaife2411
3 жыл бұрын
Hey thanks for your response but I do see it being a problem when you’re trying to dig out the The rear wheel lose power because on a real front loader you need all the wheel working together to be more efficient
@R.C.A.D.
3 жыл бұрын
Your not kidding my friend, I know that for a fact, I operated Heavy Equipment for years, I also ran a topsoil screening plant, and drove a 1999 "Sterling" 15 yard, triple axle, 15 spd dump truck, for 13 year's,😂👍 lol As for the loader; we have been discussing that problem since we first discovered it, and ironically, my Brother and I were literally just talking about it five minutes ago,😂 lol crazy, anyways, I took the loader apart and did a inspection of everything, And from what I can figure out, it's gotta be electrical, Meaning that the Esc isn't supplying enough power, or amp's rather,🤔 so as soon as the axles Experience a load or draw, the Esc goes into a "Electrical Brownout" of sorts,🤔 the battery is a 7.4v 2000 mAh 2c 2s lipo, "2c" 🤔 that's not very much, Very slow discharge rate, 😕 a 25c battery might change how it performs,🤔 That would be a faster discharge rate, which would Equal more amp's on demand,🤔 😕 But it Could destroy the stock Electronics at the same time ? 🤔 😕 I was recently throwing the idea around of using different Electronics, "Hobby grade" 4-6 Channel Radio and Receiver, along with a different ESC,🤔 I have a brand new Rc4wd outcry esc sitting here, that I've had for awhile now, it's made for duel motors, has a Built in Bec, and a Electric fan,😕 😂 it would be perfect for the loader, lol And if more amp's doesn't solve the Problem, then I have a Secondary plan,😁 Which consists of replacing the stock "MOA" axles, with a set of Custom Fit Clod Buster Rear Axles, or possibly some Rc4wd Bully "moa" axles,😁👍 Problem Solved! 😂 Lol Thanks again for your Awesome Comments my friend,😁👍 I hope that my answers, helped to answer your questions.😁😂👍👍
@terrellscaife2411
3 жыл бұрын
Ha it sounds like you really know your RC models it also look like you might have to add some more weight to the backend I seen other videos of this front loader and it’s doing the same thing with other people but but if you really want to step up your game Wedico cat 966G
@R.C.A.D.
3 жыл бұрын
Wedico cat 966G ? I'm gonna look that up right now 😁 I'll get back with you in a few minutes 😊👍
@martinsrc8752
3 жыл бұрын
R U over 14 Bro?!
@R.C.A.D.
3 жыл бұрын
😄 Lol yeah, a little bit Ha ha ha, I was 14, 32 years ago,😂👍👍
@martinsrc8752
3 жыл бұрын
@@R.C.A.D. Just checking on your safety when opening the box..:)
Пікірлер: 104