Thanks for sharing this. I built one today for my brand new Laguna 1412 and your design works fantastic! Again, thank you very much.
@TheThoughtfulWoodworker
7 ай бұрын
Nice! Glad you got a chance to try it.
@kenkroner2152
3 жыл бұрын
Made one with cheap magnets and was not happy . Bought Rare Earth magnets and made a second one and it was perfect. What a difference . Thanks and i will pass this on and give you credit for such a great modification.
@TheThoughtfulWoodworker
3 жыл бұрын
Glad the rare earth magnets worked out for you. They are surprisingly strong. Thanks!
@chashint1
2 жыл бұрын
Thanks for making the video. I have an old 14" Jet (Delta clone), three years ago I cobbled together a dust box under the table using wood and hot glue and the port is held on with bungies. It makes a remarkable difference. Your design is much more elegant, well done. If I ever have to revisit what I cobbled together I am going to leverage what you have done. I have wanted an outfeed for many years but never thought this approach would be strong enough, after seeing yours attached to the saw I am going to give it a try.
@TheThoughtfulWoodworker
2 жыл бұрын
That's cool Charles! Thanks for the nice comment and good luck with the tool mods. Best
@TheThoughtfulWoodworker
3 жыл бұрын
For product specs and specifics check here... bit.ly/2WKI1BC
Good mods. I just bought this bandsaw and resawing was terrible. My 2.5" dust collection didn't have enough air flow and clogged. I tried just plugging off part of the 4" hole inside with just duct tape and it completely fixed it. Now I'm going to do a permanent one with plywood. Good catch.
@TheThoughtfulWoodworker
3 жыл бұрын
Hi Spike, yeah I had a gut feeling that blocking off the lower port would help. It surprised me how much it helped. Glad you found some of the mods useful. Cheers!
@ramaroodle
3 жыл бұрын
Wow!! I don't know you but I think I love you! Now I don't have to DIY it from scratch! Thanks and subscribed!
@TheThoughtfulWoodworker
3 жыл бұрын
Hi Andy, yes at least it has been tested and for sure works! Good luck with it bud.
@TheThoughtfulWoodworker
3 жыл бұрын
The dust collector is a 2hp wall mounted cyclone with 6" metal pipe on the ceiling. There's about 25' of pipe between the bandsaw and dust collector. A shop vac might work on the new port only, but it wouldn't have the lungs to run both ports at once. Thanks
@peswv49
2 жыл бұрын
I only have a Craftsman shop vac and it works GREAT with the dust collection modification. I blocked off the existing port that I have reduced to 2" for the shop vac and can go back to that if I need to tit the table. Thanks so much.
@TheThoughtfulWoodworker
2 жыл бұрын
Hi Paul, that's great. I haven't heard of anyone trying the mod with a shop vac. Glad to hear it works! Best
@docjones1522
Жыл бұрын
I don't see the link to the dimensions for the pad under the table and I haven't been able to locate it on lumberjocks either. Could you please list the link or send the link again. Thank you in advance for you help
@TheThoughtfulWoodworker
Жыл бұрын
www.lumberjocks.com/threads/laguna-1412-bandsaw-mods-and-musings.331988/page-2#post-2041186. You'll find dimensions for the dust box here. The size of the foam pad isn't critical. Just cut a kneeling pad to the size you like. Best.
@biedawo
3 жыл бұрын
Nice modifications. What are you using for a dust collector? I'm wondering if you'd get better collection from the undertable port using a shop vac.
@brostraveldreams743
3 жыл бұрын
Nice mods. I plan to duplicate them on my saw. Is the the blast gate on the 2 1/2 in port needed? Are there situations you would shut it off?
@TheThoughtfulWoodworker
3 жыл бұрын
@@brostraveldreams743 You could get by without the 2-1/2" port, but it helps in some situations. For instance you take the dust port off to tilt the table. In that case it helps to close the 2-1/2" gate and still get some collection through the factory port. Thanks!
@robs8882
3 жыл бұрын
I really like the table extension! Do you use the low profile side of the resaw fence?
@TheThoughtfulWoodworker
3 жыл бұрын
I don't find myself using the fence in flat mode. I usually just use my custom everyday fence, or the tall fence for resawing. Thanks
@dominickcavallo97
Жыл бұрын
how can i get the plans for the dust up grade
@TheThoughtfulWoodworker
Жыл бұрын
Dust collection mod plans are here... www.lumberjocks.com/threads/laguna-1412-bandsaw-mods-and-musings.331988/page-2#post-2041138 scroll to the top of the page.
@mikezerler1434
Жыл бұрын
Can’t find your plans on Lumberjocks website. Please advise
@TheThoughtfulWoodworker
Жыл бұрын
Hello, plans for bandsaw dust collection can be found here... www.lumberjocks.com/threads/laguna-1412-bandsaw-mods-and-musings.331988/page-2#post-2041372 plans with dimensions are at the very top of the page. Keep scrolling down for info on other 1412 bandsaw mods like an accessory outfeed table. Best of luck!
Пікірлер: 27