Thanks guys for the great tutorial for my TS590SG 73s M6RLR Rod
@edwarddoyle5585
3 жыл бұрын
Great video. I have my TS590SG running WSJT-X. Now I need to learn how to operate FT8. Did a lot of monitoring to get the feel of it.
@edwarddoyle5585
3 жыл бұрын
Again great video. I'm up and running on FT8 made 5 contacts in less than 30 minutes, even a new band for me today, 30m.
@HamRadioAdventures
8 жыл бұрын
Great tutorial!
@mm3sgq
6 жыл бұрын
Excellent video, very helpfull de mm0sgq.
@glynnhm0lsg308
8 жыл бұрын
Great mode, I use a different radio but I turn off the AGC and about 10w on USB data. Dimension clock works great
@infoaffiliatemagic
5 жыл бұрын
Is there a video that shows how to setup the Kenwood TS-590S for WSJT-X operation?
@Dan-gi3xj
6 жыл бұрын
How about the TS-2000? My tab "Transmit Audio Source is NOT changeable to "Rear/Data". An ideas why???
@opencct
7 жыл бұрын
Excellent tutorial video! Snot or not :) 73
@sheldonapsell9725
2 жыл бұрын
I have set everything up according to the video but the Band Activity and Rx Frequency screens remain blank. What am I doing wrong?
@jon-jamesdougherty9982
7 жыл бұрын
Menus should be 71 and 72 and not as shown in the video On the 590sg menu 70 is the SOURCE of RF., Front or Rear.
@hrgft68
6 жыл бұрын
I can receive perfectly, but no Tx get the Hamlib io error when connecting to the rig, any idea for a solution?. thanks VE7URL.
@LouGawab
5 жыл бұрын
Dan asked this earlier.......How about the TS-2000? My tab "Transmit Audio Source is NOT changeable to "Rear/Data". An ideas why??? Thanks!
@hrgft68
6 жыл бұрын
was excited by this as I have been having problems, but deflated when I tried to reconcile the video to my situation, as I am running windows ten, seems to be a different device manager?
@applemachome
4 жыл бұрын
Right click on the start menu and there is device manager the same as previous versions of windows. You will also need to find that audio control panel he showed in the "old" 'control panel', not the new "Settings" app. To get to this, click in the search bar next to the start button and search for "control panel". Once that is open you should see the sound control panel listed.
@pvdk
6 жыл бұрын
Very interesting video. My TS-59SG is set according your tips en info (menu) and I have 'split' set as 'rig'. When I choose a mode the radio shows both vfo's and split is on but when I click on different parts of the waterfall the vfo B remains on the same frequency. Any suggestions what to check ?
@tonysnoo5193
5 жыл бұрын
Same happened with me too... anyone have any suggestions? Time to go read KZitem U let me down.
@johnratcliffe6438
4 жыл бұрын
Does changing those settings on the TS590 have any impact on SSB use? Can they be set once for digital modes and left, or do you have to undo them for SSB and redo when you want to work digital again?
@reganapparel
4 жыл бұрын
John Ratcliffe better late than never. You can set up SSB on Menu A and digital on Menu B (or vise versa.) Set the display to Amber for one Menu set and Green for the other. Then you'll know at a glance what mode is in use. 73
@pu2xbt74
5 жыл бұрын
I need a friend opinion, I like to do SSB phone contest, I am in doubt to buy a KENWOOD TS 590 SG or ICOM IC 7300 ... can you help me which is the best choice ??
@KennethMeyerson
8 жыл бұрын
Great video! There is an erratum in the list of menu numbers/settings. Audio level of USB input should be 70, not 71. Best -Ken
@voyfan99
6 жыл бұрын
Reverse it. Should be 71, not 70. 70 is audio source of PTT.
@Matt-zf7vz
4 жыл бұрын
Great video. Thank you. K9BBQ
@aa-mf7ls
5 жыл бұрын
Hello. Please, video config for wsjt_x version 2.0 and radio kenwood ts590sg. Thanks and 73
@chazrw2chz290
4 жыл бұрын
Great video. What should I do if VFO B doesn't move when I click on the waterfall? 😵
@darinbell6982
2 жыл бұрын
Mine doesn’t move either 🙁
@chazrw2chz290
2 жыл бұрын
@@darinbell6982 I've found that VFO B isn't important for FT-8 use. I was very new to the hobby, and digital specifically. If you need help setting up for FT-8, my email on QRZ is current. Shoot me a message. ✌
@chazrw2chz290
2 жыл бұрын
@@darinbell6982 BTW.. I have the software set to " fake it" rather than rig... seems to work well for me. $.02
@darinbell6982
2 жыл бұрын
Thanks for the info. I’ve done nothing with digital before so I thought I’d check it out. I may take you up on the email if I still have problems or don’t understand it. Thanks for offering me that 👍
Пікірлер: 30