Engine time.
If you just joined, then what you see in the video is a Land Rover 109" from 1975 that I'm currently restoring.
It was not the original engine sitting in the car, but instead a Perkins 4.203. Still not sure if its a 4D.203 or A4.203, but you'll also find them in Massey Ferguson 65 / 165.
It could start just fine with some diesel and power.
I found it running a bit rough though, and had the injectors tested, and found one was bad. Other than that, just replaced small parts and cleaned it completely.
Enable captions for comments in the video.
0:00 Before
00:43 Injectors
1:17 Test run
01:52 Cleaning Intake
03:14 Preparing for paint
05:05 Frost plug removal
05:53 Painting
06:19 Assembling
09:33 Generator
12:09 Air / oil filter bath
13:18 Done and run
Follow for more updates as i progress with this project.
Next time, gearbox.
** I may need to mention, I'm no mechanic, so anything you see in this video, may not be the correct way to do this. This is meant as a timelapse/build vlog instead of as a repair guide :) **
Негізгі бет Автокөліктер мен көлік құралдары Land Rover Series 3 Restoration Part 4 - Engine (Perkins)
Пікірлер: 18