Very nice video, my 1fz turbo is almost finished, now I need to make the harness for the aftermarket ecu. thanks for sharing
@NKPGarage
2 жыл бұрын
Beautiful setup!
@HoonTV
3 жыл бұрын
Very cool basic setup. Great work
@markbithrey3635
3 жыл бұрын
Thanks mate I’m keen to see more of your 80 I followed the build just waiting for that 4wd trip maybe with sam,al and woody 😉
@alexandergabel2794
3 жыл бұрын
Nice build, Mark. We've got pretty much a copy of yours. 1998, 320k, same color, tire size, Tough Dog kit, sheep skin, great setup ... I dreaming of a turbo upgrade for a while. Very encouraging to see how easy it can be done. Without dyno, how did you program the ECU? I've seen there are turbo kits for the 1FZ-FE on eBay at a reasonable price.
@markbithrey3635
3 жыл бұрын
Thanks mate I miss it everyday I was using a xede piggy back ecu to make it run they are what they are if it’s under a budget just be prepared to work on it your self there not perfect
@alexandergabel2794
3 жыл бұрын
@@markbithrey3635 thanks mate. The 105 with the 1FZ-FE is such a simple 4WD to repair and maintain, no EGR, no lambda probe, no catalytic converter, ... I think I will keep ours forever. It smokes a bit oil from the valve seals I guess and an engine rebuild is on the list in some years.
@lin88lin88
3 жыл бұрын
Very nicely done mate . Just out of interest are you still running stock injectors ?
@markbithrey3635
3 жыл бұрын
Yeah it had stock injectors
@christopherrundle7845
3 жыл бұрын
Hey mate I'm wanting to do the same thing. Would love a little write up of what parts you used. Map sensor fuel reg injectors ect
@markbithrey3635
3 жыл бұрын
It was pretty stock just fitted a crx manifold with the gt35 turbo and a xede piggy back processor with a 2 bar map sensor any 1:1 rising rate fuel reg will work stock injectors just up graded the fuel pumps to 455lph Walbro’s
@christopherrundle7845
3 жыл бұрын
@@markbithrey3635 legend thanks mate. I don't wanna make stupid power. 8psi and I'll be happy.
@markbithrey3635
3 жыл бұрын
@@christopherrundle7845 that you will be
@pfk6140
2 жыл бұрын
Was a nice looking rig. How did you find the noise of the air induction with the stainless steel intake snorkel?
@markbithrey3635
2 жыл бұрын
Music to my ears when on song but it wasn’t that loud when just cruising I miss it now
@James45792
Жыл бұрын
What sort of power is she making and what's the fuel economy like?
@kallan4909
3 жыл бұрын
Nice setup with the turbo. Any idea how much power it’s making and also a rough price on the turbo conversion? Thanks
@markbithrey3635
3 жыл бұрын
Cheers not sure on power figure never got it on a dyno I was only running 5psi and cost wise it was around the 5k Australian was a very much a budget build
@MineMoore
3 жыл бұрын
@@markbithrey3635 did you buy a kit for the conversion and if you did it your self was it difficult
@markbithrey3635
3 жыл бұрын
Nah wasn’t a kit just put it together myself also wasn’t to hard
@adampowell4867
3 жыл бұрын
Really nice turbo setup Mark. How'd it go?
@markbithrey3635
3 жыл бұрын
I think it went well for a heavy girl it was no super car but definitely an improvement from stock
@samburdon201
3 жыл бұрын
Hey mate u would have a list of what was on it as I’m looking to do a similar setup cheers sam 🍻
@markbithrey3635
3 жыл бұрын
It was a very simple set up turbo manifold gt35 front mount intercooler malpassi fuel reg walbro fuel pumps Yaris coil over plug with custom wiring up graded auto valvebody is a must when adding power
@alexmccaindiditagain6821
3 жыл бұрын
Noticed it’s just under 350,000km. I’ve just bought a 2002 105 series petrol with 350,000km (with regular maintenance). How long do you reckon they can last for before any major mechanical problems?
@alexmccaindiditagain6821
3 жыл бұрын
(Very new to these kind of cars)
@markbithrey3635
3 жыл бұрын
These things are bullet prof I had no idea of the service history for the first 300,000 of this car only things I checked before boosting it was compression test and took the cap off to see if it had much blow by all come up good so on went the turbo. And how long would it last thats a how long is a price of string question depends on what boost level you want to run at and what management system you have to protect it hope this helps
@jihadnimer994
2 жыл бұрын
What did you do for internals valve's pistons ECT or is everything stock
@markbithrey3635
2 жыл бұрын
No internal work that was stock block all just bolt ons
@cassidypridmore6105
2 жыл бұрын
Hey mate random question how much fuel does it go through after the turbo
@markbithrey3635
2 жыл бұрын
Jumped up about 5-10L/100km from 20L/100km worth every bit of fuel for the smile it puts on your dial
@neihanakingi3252
2 жыл бұрын
Hey mate, are you running a 6boost manifold?
@markbithrey3635
2 жыл бұрын
Nah it was a crx eBay special that I had modified looking back wish I did use a 6boost
@Sim0nDrums
3 жыл бұрын
Why did you sell it mate?
@markbithrey3635
3 жыл бұрын
I wanted a 200 series
@newylyf7481
2 жыл бұрын
Hey mate, can you run me through the ecu setup and link me to where u bought it
@markbithrey3635
2 жыл бұрын
I got the ecu second hand off Facebook and it was just a piggyback ecu so it just tricks the factory ecu if I did it again I’d just put a link ecu or haltech
@newylyf7481
2 жыл бұрын
@@markbithrey3635 i did look at a haltech, just cannot justify the 2500$ and having to pay for someone to wire in. Did yours work fine?
@markbithrey3635
2 жыл бұрын
You could run a elite 550 as they already run a batch fire factory they are only $1165 with a pin plug and it would still need to run it piggy back if auto. the ecu I used worked ok it was never perfect either way it would be the same to wire in if your confident enough to wire in a xede ecu the haltech would be just as hard if not easier as they have way more support
@@markbithrey3635 yeah I'm running auto, most people have told me I have to get the haltech2500 because of that. Is the 550 a plug and play and tuneable?
@jedpreston1801
3 жыл бұрын
What hp is she pushing
@markbithrey3635
3 жыл бұрын
I never got it on a dyno before selling to find out but I am in communication with the new owner and he was getting it on a dyno to find out
@jedpreston1801
3 жыл бұрын
@@markbithrey3635 awesome I’d love to know
@22MrHayden
3 жыл бұрын
@@markbithrey3635 did you ever find out the figures
@markbithrey3635
3 жыл бұрын
@@22MrHayden he still hasn’t got it on a dyno
@unknownuser1215
2 жыл бұрын
@@markbithrey3635 I am the new owner of this 4x4 just doing a turbo upgrade at the moment going gtx42r going to try push 20psi with stock internals I’ll post video when done
@user-bq4jf5mi6u
Жыл бұрын
давление масла очень низкое что не соответствует температуре двигателя. лично у меня на предпоследнем делении. масло 5в30 синтетика.
Пікірлер: 52