Great video! Getting ready to attempt this at my house and this video definitely helped me visualize the instructions. I plan on doing my own DIY landscape lighting video on my channel as well. Going through the comments on this video helped me set a few talking points. I subscribed and look forward to more videos! Thanks again!
@tikman317
2 жыл бұрын
when you said it really doesn’t matter which line goes into the transformer…I think the line has “White” words written on it goes into the “COMMON” from the transform & the other line goes into 12V, 13V 14V or 15V. For the lights closer uses 12V & the lights far away use 13V-15V for better connection bud.
@blankslategardens4608
2 жыл бұрын
Nice, I'll take another look soon when i add more lights and another transformer. Makes sense they would have a line for longer runs. Thanks
@missjoriccac8481
2 жыл бұрын
JTO Make sense. I think you answered my question. My transformer has 3 lines Com, 12 and 14.. I have 4 lights. Would I need another transformer?
@blankslategardens4608
2 жыл бұрын
@@missjoriccac8481 Hi, you can actually put all 4 lights on 1 line if they are all low voltage and made for landscape lighting. Just snap them into the one line and you should be fine. You only need additional wires/ lines if you have a huge number of lights that use more amps than the line can carry. The lower the number "12" would be the fattest wire and carry the most lights. Hope this helps.
@missjoriccac8481
2 жыл бұрын
Thank you
@joetrevino4135
7 ай бұрын
Would 18/2 work if I’m only using 2 lights.
@benjaminkenobi21
5 ай бұрын
It looks...... okay
@cikiled
2 жыл бұрын
Nice!
@ado-yp8nq
Жыл бұрын
How to connect the transformer nobody explain i was here to see that.
@edsab4088
Жыл бұрын
How do you open lamp fixture to replace a failed low voltage halogen bulb?
@SamanthaMunford
3 ай бұрын
What do you do if you have to replace one?
@stevenbato4786
Жыл бұрын
I have a older transformer and there’s 2 wires that need to be connected to the fixture. Any recommendations?
@missjoriccac8481
2 жыл бұрын
Maybe I missed something. I have 4 lights as well. I have 1 transformer. On it says com, 12 and 15. If I split the wire to connect to the transformer do I tie the wires together (on the same 2 lights) then place on transformer? Would I need 2 transformers? Sorry unfamiliar and trying not to hire anyone
@jessev5542
2 жыл бұрын
What do you do to the last light fixture? You obviously have to cut it. After you snap it what do you put on the other end
@blankslategardens4608
2 жыл бұрын
The last light snaps on like the rest, leaving a short bit of wire at the end. You can simply wrap the wire with electrical tape, or use liquid electrical tape first to seal the end wire which is what I do. Then just wrap that with electrical tape and you are done. Let me know if this is not clear.
@blankslategardens4608
2 жыл бұрын
At the end of the line I put a dab of liquid wire tape and then once dry add some actual wire tape just to close it off although its really unnecessary.
@titthaphal669
2 жыл бұрын
How did you waterproof the connections? I appreciate your video definitely help!
@blankslategardens4608
2 жыл бұрын
No waterproofing required, the lights snap into the line with a point for each wire. They are tight enough that you dont need wire tape or liquid wire tape. They stand up perfectly to the elements.
@titthaphal669
2 жыл бұрын
@@blankslategardens4608 thank you so much!!!
@titthaphal669
2 жыл бұрын
@@blankslategardens4608 thank you so much!!!!
@user-md5mc9ry5b
3 ай бұрын
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@adamkhalil9163
2 жыл бұрын
Did you end up using the 50 watt or 20 watt light?
@blankslategardens4608
2 жыл бұрын
the 20 watt proved enough for the house perimeter. I did use the larger ones for farther out in the landscape to illuminate trees.
@lowellirish
2 жыл бұрын
20 minutes 🤣 Did you just wake up? No coffee yet? LMAO. TRY 1.5-2 hrs just to hook up the lights...put the transformer on the house...15 min. Run the main...45 min. Trench- 2 to 3 hours... Enjoy your day...🤣 20 min...😂
@blankslategardens4608
2 жыл бұрын
lol, well I didnt include trenching so maybe it was a bit over promised.
@edubb2491
2 жыл бұрын
Good vid! Does the transmitter plug into an outlet..or did you wire it into the house breaker? Iam a def beginner..can you tell!🤣 thank you
@blankslategardens4608
2 жыл бұрын
Yep, the transformer plugs directly into an outlet from the house.
@blankslategardens4608
2 жыл бұрын
Thanks! The transformer plugs into a regular outlet. Once you plug the wires from the lines out to the yard into the transformer you can simply plug the transformer into the wall outlet.
@garypoland3507
2 жыл бұрын
Does the wire come with the transformer or do you buy that separately? If separately what type wire do I need to buy?
@blankslategardens4608
2 жыл бұрын
The wire doesn't usually come with the transformer. You can use 14 gauge but I used 12 gauge as its a bit thicker and can run longer lines without loosing too much amperage. I have a lot of distance to cover so if you can swing it its worth it. If you have too long of a line and too many lights, they could flicker because there isn't enough power to make it to the last light. Let me know if this makes sense. There are tables you can look up online to see how many lights you can get for a specific length of line and transformer.
@rosiegonzalez167
2 жыл бұрын
Question, the box says equivalent 20 watts , is that per light or total of the 4 lights
@blankslategardens4608
2 жыл бұрын
Hi, this is the box of Low Voltage 20-Watt Equivalent LED Flood Light (4-pack), so that would be 20 watt per light. Hope this helps
@williampottmeyer6774
3 ай бұрын
The LED lights are actually only using 4.5 watts but equivalent lumens to a 20 watt incandescent bulb
@chivajones1401
2 жыл бұрын
Thank you for your video, I just bought 6 Hampton Low Voltage lights, the connectors look like yours but I have a question, I have 75’ cable, do I have to cut the cable between each light or just keep the cable in one piece and attach each connector along the way without cutting it? I hope this makes send, I am very unfamiliar with this. Thank you for your help.
@blankslategardens4608
2 жыл бұрын
Hello, no need to cut any of the cable between lights. Just string one long line out and then snap the lights on to it as you go down the line from the transformer. Just lay your line down, covering the rout you want to add lights and then tape off the end or use some liquid electrical tape to seal the end. This isnt completely necessary but might help protect the wire a bit from the elements over time.
@chivajones1401
2 жыл бұрын
@@blankslategardens4608 Thank you so much, this is very helpful. Have a great day.
@cheyneyharp5097
10 ай бұрын
Yes you are not a electrician
@edubb2491
2 жыл бұрын
Good vid! Does the transmitter plug into an outlet..or did you wire it into the house breaker? Iam a def beginner..can you tell!🤣 thank you
@blankslategardens4608
2 жыл бұрын
The transformer plugs into a standard outlet. Easy to install in an outdoor outlet or run wires from a garage where you would have an outlet handy.
Пікірлер: 40