After I looked at videos and reviews by yourself and others, this is the video that sold me. I purchased one and will be picking it up from the dealership soon. Thank you for the real world video, it showed me what it's capable of and made my decision easy. Thanks again!
@ellobo1326
5 жыл бұрын
I have a trailblazer one which is pretty much identical to lane shark. Best money I have ever spent on any implement. I am limbing roads on our hunting lease. I cut at least 100,000 limbs in 8 hours or less. No exaggeration I promise. These cutters are beasts. Get one and you will not regret it !!
@bettyvancott5282
Жыл бұрын
😮 Wow. Ordered mine this week. Can’t wait!!!
@LaneSharkUSA
Жыл бұрын
Be sure to enter our ATV giveaway! Check out our website for details. You're eligible to enter if you've purchased between July 1st - September 2nd. lanesharkusa.com/pages/atv-giveaway
@popeyecop1
4 жыл бұрын
I just put in an order for the LS3. I noticed in the video that the trees he is cutting is leaving stumps pretty high off the ground. Can you cut them lower with the LS3 or will I have to follow up with a chain saw?
@arthurbuckyelksjr7918
5 жыл бұрын
This is what i need for my Kubota L2501 i could stop all the labor cost of brush cutters with this land shark.
@iamnoone9242
Жыл бұрын
I have a kubota l2501 and I want to know how it works with that tractor
@togo3624
3 жыл бұрын
Does the stump stubble cause any problems with your tractor tires? Are you seeing hundreds of new sprouts from the stumble now? Are you just bush hogging this area now?
@crawford323
Жыл бұрын
Since the cutters protrude somewhat. In dealing with the stumps, if you bask up lift the blade and tilt it down slightly, ease up again, you might Trim the stump to ground level.
@scrappydappy2827
5 жыл бұрын
One word...WOW!!!. I wonder if this would work on a kubota l2501
@LaneSharkUSA
5 жыл бұрын
Scrappy Dappy it absolutely will!
@derikalawrence8010
Жыл бұрын
Hey Lane Shark, what is the cutting capacity?
@crawford323
Жыл бұрын
Yes, just placed an order myself. It will be used on acreage next to a creek bank. I wonder what the replacement blades cost for the 32" model? (2023)
@LaneSharkUSA
Жыл бұрын
Hey @crawford323, the replacement blades for the LS-3 are $115.00, you can find them on our website store under LS-3 Parts. shop.lanesharkusa.com/collections/ls-3-parts Let us know if you need anything else!
@mueckenhoeffer
4 жыл бұрын
Thinking of a Kubota B2650 (8.7 GPM total). On paper, it should run the LS3. Have you tested it on a compact tractor similar to that?
@SheepdogSchuler
2 жыл бұрын
you ever think of throwing one of those disks on the bottom instead of the blades? I wonder if it has been done before
@TheDmarnold1981
4 жыл бұрын
What is the approximate diameter limit on the size of brush this will handle? Some of those small trees look fairly large.
@blake20054
2 жыл бұрын
I’d like to know this did you ever find out?
@michaelevensen84
Жыл бұрын
They say up to 3 inch
@dcw1540
20 күн бұрын
No hard for hoses?😊
@raywmontgomery
2 жыл бұрын
Will this work on a Kubota L4310?
@davidtorres2387
3 жыл бұрын
Would this work on a Jhon Deere 310sk??
@johnbrhodes1
5 жыл бұрын
Do you make more than 1 grade or is it fairly heavy grade like it is I'm running a John Deere 5100m this would be ideal for rds and shooting lanes could you send me information on it please
@LaneSharkUSA
5 жыл бұрын
John Rhodes sorry for the delayed response, we offer 2 sizes, but they are all built to the same specifications. We have quite a few customers running Lane Shark's on 5100's you would need the LS-2 with the high flow motor. Where are you located?
@johnbrhodes1
5 жыл бұрын
@@LaneSharkUSA I appreciate the reply I'm in spearsville Louisiana it's in the north right under Arkansas what would be the approximate cost be for the valves and everything I do have the front mid valve and I have 3 remotes in the back. It would be next year before I would purchase
@LaneSharkUSA
5 жыл бұрын
John Rhodes the unit is $4,095 and the plumbing on your tractor would probably run about $500 for the hoses if you run off the rear remote. We have a great dealer just below you, it's Ruston Tractor. We may have a full valve kit for that tractor by next year.
@LaneSharkUSA
5 жыл бұрын
John Rhodes this is the valve kit info if you aren't already familiar with it. kzitem.info/news/bejne/sp9uznuLqoiQo20
@johnbrhodes1
5 жыл бұрын
@@LaneSharkUSA ok thank you I'm familiar with them they are about 45 minutes from them. When I get back I will go by and talk to them
@patgervais6568
5 жыл бұрын
For clearing land you should put 1/2” hub in the centre that lets you ride the land
@morpro4u
4 жыл бұрын
Is that like a disc or? Where would you put it? Is there a video that demonstrates how it works? Tyia
@ericlakota6512
4 жыл бұрын
Lane shark shold have i higher push bar like most mowers as option if they dont have one a stinger bar obove the open cut of blade
@jbob1274
5 жыл бұрын
This is a quite impressive piece of machinery what are you running it on and what is the rpm of the blades
@LaneSharkUSA
5 жыл бұрын
jacob miller this unit is on a Kubota L3301, that tractor runs at about 6.3gpm so the blades are turning around 1,100 RPM's
@jbob1274
5 жыл бұрын
@@LaneSharkUSA wow so what is the reccomend rpm
@LaneSharkUSA
5 жыл бұрын
jacob miller the LS-3 is for tractors running 5.5-8.5gpm the LS-2 is for 8.5 and up
@jstjkas
5 жыл бұрын
Work on a LS XG3025?
@bigchris753
5 жыл бұрын
Will you guys be making a mulcher ?
@LaneSharkUSA
5 жыл бұрын
Big Chris no sir, there are already so many good products out there I feel like we'd be out of our element at the moment.
@Geesum44
Жыл бұрын
Will this work on front of JD 65hp ? Thanks
@LaneSharkUSA
Жыл бұрын
Yes! find your fit here: lanesharkusa.com/products
@seansysig
5 жыл бұрын
Will the series 3 work on a 2019 Kubota BX23S?
@LaneSharkUSA
5 жыл бұрын
Unfortunately that tractor is too small for the Lane Shark.
@jlfreemaniii80
4 жыл бұрын
@@LaneSharkUSA Need to make one that could work on the BX23S or a Deere 1025 very popular tractors could be a market for it.
@nomaddawhat7643
4 жыл бұрын
@@jlfreemaniii80 Need to make a PTO-powered hydraulic pump like Trailblazer Attachments made for theirs. Then you can run just about any hydraulically powered equipment.
@gregorycampbell2880
3 жыл бұрын
@@LaneSharkUSA what about a B2301? Big enough?
@ericplunkett86
3 жыл бұрын
@@gregorycampbell2880 you need to weigh about 2000 lbs for the LS3
@jbob1274
5 жыл бұрын
Favorite video
@markengelsen8091
Жыл бұрын
Just making a big old mess with that thing
@williamfischer8867
5 жыл бұрын
Would be better if you used a forestry mulcher
@LaneSharkUSA
5 жыл бұрын
William Fischer true, but I can count on one hand how many people in our town have money for a forestry muncher. Our attachment was designed with the everyday guy in mind. Almost everyone I know that needs something like this already has a tractor, and spending 4-5k to equip your tractor to dip this kind of work is more in line with their budget. We have never claimed to compete with forestry equipment, but you gotta admit, this thing is impressive when you think about all factors involved.
Пікірлер: 51