I am Langer~~ Welcome to subscribe to my channel, I will share some of the process, experience and teaching of DIY upgrade and maintenance.
Also welcome everyone to discuss
Continue to test and deal with #FailureCode #P2178 、#P2177 (Related tests and solutions, if you have the opportunity to upload the video, if you have similar problems, you can also leave a message to discuss)
The time point is also just in the last change# Idle speed motor not long, and also dealt with and improve # waste oil recovery, the result is often not long on the road when the air conditioner is turned on, wait for # red light idling to turn off, or after driving for a while, # step on brake idling Turn off the flame...and so on.
During the period, it jumped again#Crankshaft sensor fault code, test and exchange spare parts, it is good again!!
And because I didn’t change much of the air-conditioning compressor, after excluding the compressor problem, I thought that the early car encountered this situation, the mechanism is the so-called #冷气速器 problem, which is the idling motor of the current model. problem.
I originally wanted to dismantle the old and leaky idle speed motor. I inadvertently tested it, and learned that the idling speed of this car is not adjustable, whether it is #original, crawler, or looking for various videos. It is adjusted automatically by computer.
I originally wanted to sort out this leaking idle speed motor. Therefore, when I adjusted the disassembled plastic screw, I found and guessed that I can adjust the idle speed through this. Sure enough, after one or two months of testing and speed regulation, It is indeed feasible, and it also solves the problem of idling and stalling after turning on the air conditioner, and also solves the problem of #D漢##idle speed# jitter.
In the meantime, this engine-related car series #ESCAPE #邱比特 #Mazda 6 ... and other old cars are in the same condition and several dramas
When idling at #P gear, the speed is 700~750 rpm
#D gear idling speed is about 680~700 rpm, which is normal
And I bought this second-hand car, after many times of finishing, the basic D gear idling speed will be within 650, P gear is about 700 rpm...
So my own guess is that this idling motor may be factory adjusted to the standard of about 700 rpm in P gear, which will cause problems in D gear... Or maybe it is the idling motor manufacturer that came out of the factory later.
I will share the practical experience, knowledge, #diy method, and selfless use of the film with everyone!!
Some ideas will be told to everyone in this way!! If you agree with my ideas, if you like my video, if you want to do it yourself!! Then subscribe to my channel!!
Due to limited funds, the filming time will be more variable.
If you want to sponsor me to make a film, in addition to subscribe, share, and like,
My paypal account:
wapv8088@gmail.com
Негізгі бет Langer diy ESCAPE2.3 The basic idling speed is insufficient, and what to do if it will jitter?
Пікірлер: 44