Hey. In conclusion, what is the main difference betwin PRO 1600 and DS 2000 ? (in precision, animatio or power)
@MTXODIN
2 жыл бұрын
Mit wieviel kpps wurde gescannt?
@user-jx6jz4ui1h
4 жыл бұрын
Hello. Tell me please. For newbies. Is it possible that at a laserworld company, lasers of different lines can work as a master slave. I have cs-1000rgb and ds-1000 rgb ??? Thank.
@MiroxxSk
4 жыл бұрын
Hello friend, I thing, if you linking cs with ds laser via dmx IN/OUT will be work as a master/slave , of course is it necessary to set ip address
@user-jx6jz4ui1h
4 жыл бұрын
What this mean? Where i need to set ip adress? And how?
@dalefoulser6795
5 жыл бұрын
What is the difference between Laserworld and Kvant? Looking at the Kvant 3000 or Laserworld Tarm 2.5 so would be interested in your thoughts.
@MiroxxSk
5 жыл бұрын
Please contact me, via mail: miroxx@miroxx.sk, thank you
@jhrlasers
4 жыл бұрын
Simple : ---> Kvant are actually quite for High End class lasers systems products. ---> Laserworld are kinda like.. so so.. or moderate (but not for their RTI or probably their Tarm lasers) FYI, The Highest of all (in my opinions) are Arctros. But uhmm.. I don't recommend to get it since... They're too heavy and bulky.. also not quite suited for touring environments where you have high mobility levels ;)
@jhrlasers
4 жыл бұрын
You could get Clubmax 3000 from Kvant if you wish. Kvant did have their own partners. That's why their products are always Integrated with an FB4 from Pangolin. And I don't think you want to get a Tarm Lasers instead since.. you probably should have a special request to them for an FB4 (if you do based on a Pangolin software products)
@fabien6186
5 жыл бұрын
Hello ! Is the show created with ILDA ? I dont find some answers to have a good visuals with my 1600 pro RGB, i use a bit the dmx and i find it limited. I dont use scenes ect only the faders to switch actions and themes.
@MiroxxSk
5 жыл бұрын
Hello Fabien, show is created in soft and it is possible to save in ILDA format, yes with dmx controller you limited, you can buy some software with hardware and create your own effects, shows etc or use a lot of any pre programmed effects in soft ... if you have any question feel free to contact me
@filtax3984
Жыл бұрын
you use one hardware(like fb3) and the lasers connected in serial?@@MiroxxSk
Пікірлер