*Love the size and it fits perfectly in a corner but **Fastly.Cool** the whole room. Really like how you can auto adjust how long you want the fan to be on. It is quite but highly effective.*
@MeatSim9
2 жыл бұрын
Found a thrifted Lasko today that was just CAKED in greasy dust, so thank you for showing me how to get this apart. Gonna put the plastic pieces in the dishwasher, so I'll only have to clean the motor side by hand.
@Vammmpeeer
2 жыл бұрын
Very smart print it back together wet. Not only can you blew it out but it'll build more dirt/dust due to it being wet. But great job taking it apart
@patb3277
3 жыл бұрын
Thanks so much for the video; just recently got my Lasko fan back from a neighbor who borrowed it years ago, and it was a MESS! Couldn’t have managed without your video as a reference.
@GladysDelgadoGarced
2 жыл бұрын
Wow, this was a great video and good questions and replies!! I took mine apart but couldn't figure how to pull it apart because of that stupid screw. I have a dermal so I'll use it to cut a slit in the screw. It was a pain to take it apart but worth it. Thanks again!!!
@asiadardar4480
Жыл бұрын
What screw driver did you use to unscrew the triangle thingys
@jeanhill210
3 жыл бұрын
Someone needs to craft a fan that you can Easily! Clean ugh
@sageywavey
Жыл бұрын
I know, right? This is ridiculous
@chrismoore7359
4 жыл бұрын
My older model 7050 has screws that look like they take a star bit but there's a raised cylindrical spike dead center of each damn screw! Seems like Lasko is using proprietary screws hoping I'll buy another one instead of cleaning it...
@MikeyA5693
4 жыл бұрын
They are Torx security screws. You can buy a tool set at home depot to remove it.
@shadwell749
4 жыл бұрын
Super helpful.Some genius decided to put two security screws so I drilled them out.
@patb3277
3 жыл бұрын
I used a Dremmel tool with a narrow grinding wheel to cut slot in the screw heads, and removed with flat head screwdriver. What the heck was with those two screws anyway? There was one each in the two bottom foot plates.
@RaiderBabii23
8 ай бұрын
Love this fan!! Finally got tired of the gunk and decided it was time to figure out how to clean it. Amazingly helpful video! I got everything off, everything cleaned, everything almost back together.. can't seem to get the handle cover back on.. how'd you do it? it's so hard, don't wanna smash my fingers, ugh. THANK YOU!!
@FaultStrider
4 жыл бұрын
Super helpful, trying to clean this damn thing, damn near broke it
@johnwohlheter601
7 ай бұрын
I must have a different model of lasko blower fan. Mine looks like the one in the video but does not come apart like the one in the video. Looks like its going to be a pain to take apart...
@stephaniehoehn6691
3 жыл бұрын
Hi can you please tell me what kinda too u used to take the non Phillips screws out with
@camerongranger5217
3 жыл бұрын
You can use a allen ranch :size 5/64
@terrigast3874
7 ай бұрын
Where do I get that type of screwdriver
@helowings9312
3 жыл бұрын
Had to be a bit forceful to get the black pieces off however super helpful
@abel.gonzales
Жыл бұрын
Thank you!!!!!
@mimigee5631
Жыл бұрын
Thanks
@jeramybearamy8539
4 жыл бұрын
Anybody able to remove the fan cylinder from the motor assembly? I removed the nut and it doesn’t come off. Also, I noticed a tiny spring on the ground and have no clue where that goes.
@spartan.HOCOPOG_0011
3 жыл бұрын
About the Fan cylinder, press de metal axis with your thumb while pulling with both hands, also press gently the plastic casing with your knee.
@patb3277
3 жыл бұрын
I couldn’t remove that nut, since the entire shaft turned within the motor, so just cleaned with compressor blower the best I could. That spring came from a small hole in the side of the blue housing, and a small metal ball sat on top of the spring, accounting for the clickey sound when. pivoting the blower from one position to another. Naturally that little ball was lost in the process, but found the spring, and just happened to have a small metal ball for replacement. What a chore, but with time and lots of patience, it looks like new and still works great.
@ricardobribiescas
2 жыл бұрын
I can't get the freaking nut in the middle big the fan why any suggestions???
@mrundle
4 күн бұрын
Did you figure it out?
@neverclearone
4 жыл бұрын
Mine has triangular screws in the side grid, how do I get those out? I don't have a bit like that?
@neverclearone
4 жыл бұрын
I got them out with a really small flat head (the kind you clip on your shirt pocket.)
@kjohnson9912
4 жыл бұрын
Amazon
@joshrichey72
3 жыл бұрын
Anyone else clean their fan and now only have 1 speed? Any solutions?
@almems8290
2 жыл бұрын
Did you ever figure it out
@crazygirlfun1
3 жыл бұрын
0:51 i can't even get the fan out. I'm ready to throw the whole fan away
@Coldheartedmanong
3 жыл бұрын
Quitter
@robertmoore7174
5 жыл бұрын
Ty I need the help disassembling
@PrinceRubenJohnJoya
4 жыл бұрын
Thanks big as really big
@jeanhill210
3 жыл бұрын
I have 3 weird screws that I have no idea how they come off to achieve the very first task 🥵
@Spirit583Gaming
4 жыл бұрын
thanks not a big fan of seeing the feet and legs but i'll give a thumbs up for at least showing how to not break this darn thing.
Пікірлер: 39