Yeah now I need to find the money so someone can repair the wall around socket and screw it flush to the wall currently one side dosent screw down and there's gaps 😩being disabled can't even do it my self
@jamesbartlett5005
4 жыл бұрын
I hope u guys get enough work and keep smashing the vids out. Good luck, its going to be tough for the self employed especially 🤞
@PaintingandDecorating
4 жыл бұрын
Thanks, yes worrying times, hope alls well for you.
@scottbob3917
4 жыл бұрын
You should be sponsored from that foam company the amount you use. And them walls are fooked
@orbitalforest
4 жыл бұрын
You of all people should have a foam gun by now 😂👍
@Franz10mp
3 жыл бұрын
You can't be serious, the final result sucks! So much discrepancy between the area around the socket and the rest of the wall!
@acropolisnow9466
4 жыл бұрын
you need to check out Toupret TX110 filler. No depth limitation.
@ratchriat1716
4 жыл бұрын
that socket is badly install and been bagged with decorating caulk then to follow by peas off resistance (the foam) looks likes is been there good fixings.
@PaintingandDecorating
4 жыл бұрын
Thanks.
@clivesquire6463
2 жыл бұрын
thank you so much my daughter has a few of these in her first house after the electrician has chased out i think i know what im doing next week many thanks great videos keep up the good work its people like you that inspire us diy people .
@PaintingandDecorating
2 жыл бұрын
Thank you glad we can help
@Dweemis
3 жыл бұрын
Look's like my local council did those repairs!
@c.coleman1802
8 ай бұрын
What is the foam he's using?
@matthews8377
4 жыл бұрын
What’s on the rag when you wipe over just water or diluted pva again? Thanks
@darrenchandler8799
4 жыл бұрын
They would love you on English heritage
@StephenSmith-vs8hr
4 жыл бұрын
Do you prime over the filler before putting the top coat of emulsion on.
@PaintingandDecorating
4 жыл бұрын
Yes, you can use a primer, mist coat or diluted PVA. Whichever you use it will still need two coats of your finish.
@metallitech
4 жыл бұрын
I have tried using decorator's caulk for cracks because it's flexible and because I would expect polyfilla to just re-crack. It seems to have worked, but the repair was a bit visible from the start.
@PaintingandDecorating
4 жыл бұрын
using foam helps give the filla support.
@CaRcInOgEnIcxSyRiNgE
7 ай бұрын
Whats the material being used at 6:50?
@PaintingandDecorating
7 ай бұрын
That's easy sand polyfilla. Thanks
@SpacewolfDan
3 жыл бұрын
that foam stuff is awful as hell
@PaintingandDecorating
3 жыл бұрын
Yes can be... takes some getting use to.. but worth the struggle.. thanks
@Zdlifestyle
2 жыл бұрын
What was that foamy thing - I have just used ready made plaster to fill in where it’s been chased and it’s taking ages 😞
@scorpionnetherrealm8937
4 жыл бұрын
I have a question that im very curious about, how can you change a spot light fitting mine are covered in paint and wanted to sruce the ceiling up. Please dont say get a sparky im quite happy to do it myself if i dont need a sparky hope you can answer it. Thank you keep up the good work stay safe
@noseyfuker
4 жыл бұрын
perfect every time as normal
@PaintingandDecorating
4 жыл бұрын
Thank you.
@dave1secondago
4 жыл бұрын
great job fella I learn everyday
@PaintingandDecorating
4 жыл бұрын
Thank you.
@petergunn9149
4 жыл бұрын
Nice 👍 You Sir are a real craftsman that takes pride in your work 👍 God Bless and Be well ☦️🇺🇸
@PaintingandDecorating
4 жыл бұрын
Thank you.
@wez9943
4 жыл бұрын
Do you ever use the premixed poly filler in the tube? I notice you make a lot from powder so just wondered if you thought they where any good as I have a few jobs coming up that will require some poly filler. Thank you
@wongkelena
2 жыл бұрын
Hi . What is the stuff u use at video. 6.41. Tks
@adriansandry2783
4 жыл бұрын
Job well done as usual. Life got so much easier for us after God invented expanding foam!
@PaintingandDecorating
4 жыл бұрын
Thank you, without a doubt.
@rossemslie4528
4 жыл бұрын
Have u stopped working with this virus going about?
@justintemp
3 жыл бұрын
Would you use expanding foam each time, or would you ever use thistle binding then filler on top before sanding and painting? How would you attach the pattress if it's loose... I've seen some just ue an adhesive on the back...?
@Khaled91
4 жыл бұрын
Was that primer you used at 9.01 before painting it? If so, which primer? Brand?
@markcrotty5910
4 жыл бұрын
Nice one👍🏼
@PaintingandDecorating
4 жыл бұрын
Thank you.
@goonugoodthing
Жыл бұрын
Why do you use diluted PVA?
@catross3713
4 жыл бұрын
Boss man
@PaintingandDecorating
4 жыл бұрын
Thank you.
@john-vick1
3 жыл бұрын
what is the name ? please
@justintemp
4 жыл бұрын
Do you always use this method for wall repairs? Seen a few vids and it's pva, foam, and pva, filler then paint...
@adrianmorris8258
2 жыл бұрын
what the hell are you doing
@nickevans7049
4 жыл бұрын
only one coat of filler boss whats going on ?
@Dennizon1
4 жыл бұрын
Great stuff. I have genuinely learned more from these videos than from any other source. Also just relaxing to watch.
@nealaddison2981
3 жыл бұрын
whats the white stuff you paint over the filler with im new at this and need to get the correct stuff at the shops
@jamiecollins4941
2 жыл бұрын
Zinza 123
@vince6829
Жыл бұрын
Thank you for sharing your knowledge
@PaintingandDecorating
Жыл бұрын
Your welcome. 👍
@lisapointer4350
3 жыл бұрын
WOW! lovely finish what a difference TFS
@diggerandrew
4 жыл бұрын
Love your videos! A few months ago I did your method for cracks, but unfortunately a couple have come back.
@PaintingandDecorating
4 жыл бұрын
Thanks, sorry for late reply, practise makes perfect.
@spinx1200
4 жыл бұрын
👍🏻👍🏻👍🏻👍🏻
@TapelessDrywallFinishing
4 жыл бұрын
👍👍👍👍👍
@navigators11
4 жыл бұрын
Do you ever find the expanding foam pushes the wall or wood out of shape after it fully expands and hardens. Thanks
@PaintingandDecorating
4 жыл бұрын
Not really, it's all on how much you use. Most of the pressure will come out of your primary hole. Thanks
@nicolebogard3215
3 жыл бұрын
How do you know when to use this method of the holes verses taking a knife and cutting out all the loose plaster and seeing how big of a crack it really is?
@PaintingandDecorating
3 жыл бұрын
Practice really but usually you can tell by tapping on the wall how loose it maybe. Thanks
@MrBarrytommy
4 жыл бұрын
Great work, would this work on cracks on a swirl effect artexed lath & plaster ceiling ,I've taken up flooring and applied PVA to hopefully strengthen it, anyways Thanks for yours videos they really help
@PaintingandDecorating
4 жыл бұрын
Yes, it's like keyhole surgery.
@Jin-vn1xu
4 жыл бұрын
Wow! Great job! 👍🏼I have to find the someone like you to fix my flat. Seems so hard 😐 Thanks for the video!
@PaintingandDecorating
4 жыл бұрын
Your welcome, sorry for late reply.
@richardpearson4248
4 жыл бұрын
Great video 🇬🇧👍🏻
@damiangrady2868
4 жыл бұрын
I'm just painting my house now they've smashed white silicone around all window reveals. Nightmare
Пікірлер: 67