Use a cloth on the magnet so it can be unwrapped after collecting it
@ecave3435
2 жыл бұрын
Or a plastic
@silly_goofs
2 жыл бұрын
No but what do you do if its already on tho
@mrvoltem9379
2 жыл бұрын
@@silly_goofs you weep in sorrow, for it is impossible Or apply duct tape, remove the duct tape, some filing will stick to the tape. Repeat until clean enough
@mariesyvian8187
2 жыл бұрын
@@mrvoltem9379 use another magnet that IS covered dude
@mrvoltem9379
2 жыл бұрын
@@mariesyvian8187 the thing is due to how the inverse square law works, you need an exponentially stronger secondary magnet, which is much harder to get than what amounts to glue.
@kaywantsfood
2 жыл бұрын
"Do not eat! This is not food!" There go dinner plans :(
@molrat
2 жыл бұрын
if u want to u can eat it, ill allow it :))
@ape6213
2 жыл бұрын
Humans can have a little iron, as a treat
@tonyb.2341
2 жыл бұрын
Iron is essential nutrient. Iron is a major component of hemoglobin, a type of protein in red blood cells that carries oxygen from your lungs to all parts of the body. Without enough iron, there aren't enough red blood cells to transport oxygen.
@cubedude8690
2 жыл бұрын
@@tonyb.2341 🤓
@alexwasthere1
Жыл бұрын
@@cubedude8690 ahhaha
@littlepastelkitten
2 жыл бұрын
use plastic wrap on the mag, easy to take off. rule one playing with filings is dont pick them up with a bare magnet
@wingedfish1175
2 жыл бұрын
Isnt the force of the filings attached to the magnet just gonna tear the plastic?
@verestoyjanos5013
2 жыл бұрын
@@wingedfish1175 no. Its powder not spikes, it just creates spikes, but theire soft
@youngboy_kodyyoungboy_kody1777
2 жыл бұрын
@@wingedfish1175 q
@savetheevo
2 жыл бұрын
@@youngboy_kodyyoungboy_kody1777 q
@ilovemalechickens
2 жыл бұрын
I came to the comment section to find this answer thank you!!!!
@frothybeast7884
2 жыл бұрын
I’m feeling all filled up with all these iron fillings, damn I need some filings.
@SirUncleDolan
Жыл бұрын
You're nicer than i was gonna be about it 😅
@rescuedcarcollective4916
Жыл бұрын
I was just hoping to see this comment higher up 😊
@MadScientist267
Жыл бұрын
IKR
@MadScientist267
Жыл бұрын
@@SirUncleDolan and I was 🤣
@TheCablebill
Жыл бұрын
I keep my iron fillings in the filling cabinet with my other fills.
@JaDroppingScience
2 жыл бұрын
lmao I'm an idiot, just realized it's filings, not fillings.
@Eynd297
2 жыл бұрын
Also since you editing with CapCut you can delete the end scene that just says cap cut
@JaDroppingScience
2 жыл бұрын
@@Eynd297 Shoot, this is the first time I missed deleting that. Thank you!
@RancidCarcass
2 жыл бұрын
easy mistake to make😂🤦♂️
@firstletterofthealphabet7308
2 жыл бұрын
refill your iron today!
@redhotweezer
2 жыл бұрын
Just curious: why shouldn’t you eat the cereal after extraction of iron?
@Maurcusj777
Жыл бұрын
The way he pronounces filings as fillings has me shook
@McGowanForge
2 жыл бұрын
As a knife maker, I've probably inhaled enough metal for 50 people
@woppagangnamstyle
2 жыл бұрын
"Welcome to JaDropping Science,today I'm going to extract metal from this guy who has inhaled all kinds of metal during his life using this Mega Ultra Hyper Sonic Magnet™.Hopefully we don't extract his soul and life essence in the process!"
@elafimilo8199
2 жыл бұрын
*Magneto hand twist
@nicklewis9932
2 жыл бұрын
Time to go magnet fishing in your lungs!
@movedaccountscyayalls7119
2 жыл бұрын
@@woppagangnamstyle technically do we have irons in our body
@cheetodorito7403
2 жыл бұрын
@@movedaccountscyayalls7119 probably not supposed to be in our lungs tho lol
@STICKOMEDIA
2 жыл бұрын
The capcut ending is gold
@jayrawd
Жыл бұрын
No its just iron
@Cruisey
2 жыл бұрын
'File-ings', not 'fillings'. They are what you get when you move a 'file' across iron.
@fluffstar_
2 жыл бұрын
Same.
@elduderino007
2 жыл бұрын
@Zach Parsley rude
@user-ke1gn3ql1g
2 жыл бұрын
@Zach ParsleyGlad you're here to prove it
@nikkismith6106
2 жыл бұрын
@@user-ke1gn3ql1gis your name your IQ
@sleepful1917
2 жыл бұрын
@@elduderino007 you're rude for calling him rude
@jackmehoffi8u
2 жыл бұрын
If you use another strong magnet wrapped in a rag or plastic sheeting once it comes off the original magnet you can just pull the plastic off of the second magnet and it all falls off the plastic
@bfurl69
2 жыл бұрын
This! ^^^ going to have to try this!
@Metal_Master_YT
Жыл бұрын
sadly, this is rarely very effective. usually the original magnet (if its strong at all) will hold onto a large portion of the magnetic powder, which is the part that is difficult to get off.
@InfantShredder9000
2 жыл бұрын
There was no warning to not eat the rocks after extraction 😈
@friedsticks4544
Жыл бұрын
"Do not eat, not food." That's how you know people have tried before 💀
@GRBtutorials
Жыл бұрын
TBF, it’s usually children who don’t know better.
@min3craftiscool553
2 жыл бұрын
... why do this to yourself... that's so hard to clean... just use a zip lock sandwich bag inverted... when you want to clean up just fix the bag and seal it shut so all the iron is inside the bag nice and neat...
@Metal_Master_YT
Жыл бұрын
I legit use the exact same method xD great minds think alike!
@min3craftiscool553
Жыл бұрын
@@Metal_Master_YT a lot of people do... which is why it confused me that he didn't...
@seganaleqa
2 жыл бұрын
There’s one guy that collects iron with a strong magnet (puts plastic over the magnet first), and then adds the iron to slime. It looks so cool watching the magnetic slime react to the magnet. 😻
@PuppyPrincess
2 жыл бұрын
Don't get it on a bare magnet. Always have a paper or plastic wrap or something. But once it's on you can use something like a business card to push it all to one side, then use another business card to push the iron filings onto the first
@lemonnecco8316
2 жыл бұрын
I was thinking about how delicious those iron filings looked. thanks for letting us know that they're not edible
@DaetB
2 жыл бұрын
Freze or heat the magnet, most magnets will recover the magnetic after fount back to room temp
@thecharredone329
2 жыл бұрын
Some that actually give an answer to his question
@mamax7169
2 жыл бұрын
freezing makes it stronger an hearing will destroy the magnet. you could try to blowtorch the iron the get it over its curie point
@adamripplinger6035
2 жыл бұрын
Woooaaaah
@HelloThere.....
2 жыл бұрын
How would both heating AND freezing have the same effect?
@mamax7169
2 жыл бұрын
@@HelloThere..... it doesn't. freezing it would make the magnet stronger and heating it higher than the curiepoint would demagnetize it.
@dsmpperson5543
2 жыл бұрын
Magnet people are so cool like especially if you’ve met a magnet person in real life man the do be really cool people
@mushroomwizard1175
2 жыл бұрын
You should’ve put a strong bag or plastic wrap over the magnet to stop that from happening or you’re going to have to demagnetize the magnet to get rid of all the iron dust.
@MrZenmancer
2 жыл бұрын
No actually you just take your dirty magnet full of filings and hold it over and even stronger electromagnet and it will transfer from one to the other but you can actually turn the electromagnet off afterwards.
@calebpopcorn4386
2 жыл бұрын
Hi
@ChatMania487
Жыл бұрын
The way he says "fillings" instead of "filings"
@moloney0218
2 жыл бұрын
Use a hose on jet and shoot the water at the magnet, gets it real clean
@zackstump5425
2 жыл бұрын
There’s people giving preventive ideas Then there’s the ones saying you’re gonna have to demagnetize the magnet Then there’s this guy
@CyberSage796
2 жыл бұрын
@@zackstump5425 THE GUY
@notTheDutchBoy
Жыл бұрын
You can also use air from a compressor if you have one. Works great on smaller magnets and wil probably work fine on bigger magnets. Wont work as well as water but is a lot less messy
@hawkknight4223
2 жыл бұрын
People thought I was crazy for saying you could collect magnetic iron from cereal, crackers and gravel bars. I’m so glad someone else has said it.
@wyattlaker719
2 жыл бұрын
You need to put a plastic bag over the magnet when you clean up the iron so you can take it off easy
@ragsdale9
Жыл бұрын
You have two choices to remove this dust. #1 a stronger magnet with a cloth or plastic bag strong enough to not be punctured. #2 very high powered compressed air or very fast moving water. I've never tried the water but moderately compressed air gets 80% or so off ordinary sized magnets. But keep in mind, the larger the particle the less effective the air is to remove it.
@bemyguest9696
2 жыл бұрын
Just Snort it Like the Good ol' Days Or is it just me?
@Brick2buddies
Жыл бұрын
I don't know how to clean a magnet, but you can prevent the problem by putting it in a plastic ziplock bag.
@Radioactive100100
2 жыл бұрын
I would assume running a current through the magnet might reverse the polarity and you can pick up the iron pieces
@kamally
2 жыл бұрын
Think that doesn't work with normal magnets and only electro magnets
@matcuscorpez6452
2 жыл бұрын
@@kamally your right plus if you did somehow do that with a regular magnet i think you would end up demagnetizing it.
@AdamHH11
Жыл бұрын
You can design a ferromagnetic mechanism that uses the physics of levers to release the iron filings from a strong magnet. Attach the magnet to a lever than when you want to magnetize things, push the lever down and the magnet attaches to the magnetic material. Pull the lever and the iron fillings release
@MrMedoro
2 жыл бұрын
Plop the magnet in a bag when you use the iron so you can just carefully take the magnet out of the bag without getting any iron filings on the magnet you should also buy ferrofluid it’s really cool I tried making it though but I didn’t have the right iron I need iron powder and I got iron oxide instead
@chrisn.6477
2 жыл бұрын
Iron and magnets? You got it. Cameras, ballistics, pneumatics..... go back to school.
@koniczka2000
2 жыл бұрын
"Reminder: Do Not Eat!!! This is not food." *Aww man and I was planning to..............*
@zippychipz2800
2 жыл бұрын
“Do not eat! This is not food” Ah, I see. I’ll just drink it then.
@flatjack-flats
2 жыл бұрын
Put magnet in Ziploc bag before you do this. And love you videos 👍
@NicksWhipShop
Жыл бұрын
Wrap your magnet in saran wrap. It saves so much time. Just turn the wrap inside out when youre done, and your filings are ready to go in a little plastic bag.
@Project-BetterU
2 жыл бұрын
Throw the magnet
@omariontheninetailsjenchur5908
2 жыл бұрын
Lmao
@Solostylevids
Жыл бұрын
No, you just use a Ziploc bag you put the magnet in a Ziploc bag then you use the magnet inside the Ziploc bag to pick up the magnetic dust then you use the bag to flip the dust into the bag remove the magnet, then throw away the bag😊
@mack7963
2 жыл бұрын
You would think that he'd have known that iron 'fillings' are actually called iron filings, but I guess not 😔
@soda_yoda3962
2 жыл бұрын
Do not eat! This is not food! Ah, thanks Sherlock i was about to make myself a magnet sandwich
@alexsmith3923
2 жыл бұрын
Get a stronger magnet with something over it and get all of the magnetic dust off
@unouin7252
2 жыл бұрын
??
@alexsmith3923
2 жыл бұрын
@@unouin7252 it is how you can get the magnetic dust off.
@Sam_on_YouTube
Жыл бұрын
If you drag a strong magnet through a field, you can find some rocks that are smooth, but not round. Those are micrometeorites. I found a couple with my kids a few years back. It was a little pandemic science project.
@davidf644rock
Жыл бұрын
"fillings" lol this is what happens when children try to teach science
@socalcpl775
Жыл бұрын
Wrap the magnet first with saran wrap. If you get iron filings on the magnet a wire brush used quickly will knock off most of the filings. Compressed air works good as well.
@grantdraus7449
Жыл бұрын
Filings not "fillings" They are named after the tool that can produce them. Great vids btw.
@rileymannion5301
2 жыл бұрын
A good tip for slow mo is LOTS OF LIGHT as much light as you can get it will look much better
@RacoonCatz
2 жыл бұрын
I recommend putting something like Saran Wrap over the magnet or putting a bag over the magnet first. Easy removal of the shavings
@atagoandtakao532
Жыл бұрын
You can heat up the magnet depending on what type you can heat it up and lose its magnetic field and will return back to its original state of being magnetic when it cools down
@kreynolds1123
2 жыл бұрын
Vegitable oil on a paper towl and some rubbing will help remove magnetic particles. The oil sticks to bother particles and the paper. And rubbing can push it into the fibers of the paper towl. May need more than 1 sheet.
@frogdude1337
Жыл бұрын
If you cover the magnet in a plastic bag or some cling film, you can take the bag off, with the iron filings on it
@runikvarze6191
2 жыл бұрын
Put the magnet in your freezer, in a container to collect the filings. Freezing a magnet will halt the magnetic flux and make it temporarily non-magnetic.
@niclikescakes
2 жыл бұрын
Haven't seen anyone mention this but tape works well to clean dirty magnets
@zendell37
Жыл бұрын
High pressure air. That's how I clean my magnets. You can scrape and wipe off the bulk, then blast the rest off with a fine nozzle on a shop compressor, or get something a bit stronger.
@Godolotl
2 жыл бұрын
Use an acid or chemical reaction to dissolve the iron or make it no longer magnetic, this won't work if your magnet is chipped as it no longer has a coating to protect it, you could also use a heavy oxidizer to rust the iron to the point that it will wash away with vinegar
@theredphoenix33
2 жыл бұрын
It's not like i'd know either, i'd watch myself use a stronger magnet of the same polarity
@yoyofargo
Жыл бұрын
they're called filings because they're what falls off when you scrape a file across a piece of iron
@blixh3ad
Жыл бұрын
Use an equally strong magnet and force the matching poles together. They’ll cancel each other’s magnetic fields and the filings will fall off
@DaFrancc
2 жыл бұрын
To make it easier to remove fine magnetic stuff like iron filings, you use a plastic bag or something to separate the magnet from the iron filings. Then you don’t have to clean and you get 100% of everything that you collected
@vinaykumarhs5509
2 жыл бұрын
This guy took a regular science hobby to 100% accuracy gun
@Argom42
Жыл бұрын
Fy-ling Noun: a small piece of material that has been filed off a larger block, usually used when talking about metal.
@Numby322
2 жыл бұрын
They're strong for collecting iron, but it's a pain trying to remove the iron to your magnet
@spohnarthur8347
Жыл бұрын
to clean your magnet. you can use an eletromagnet that is stronger than your dirty magnet so it takes the powder, then put the eletromagnet above your recipient and turn it off.
@microdesigns2000
Жыл бұрын
While I was watching an old mechanic drill some holes in my machinery, I was put out because he was making a mess, chips and powder flying everywhere. He didn't even have a cloth to protect anything. Well he finally put away his drill and taps. He turns around and opened a little drawer on his toolbox. He took out a little tiny plastic bag. They he took a magnet from the side of his toolbox and dropped it into the bag and Bryant to wipe up all the metal chards. It only took him ten seconds to clean up. That is when I realized I had just been served a lesson from an old mechanic. He turned around again, and over the garbage can attached to the side of his toolbox (which I had not before noticed), he opened and reached into the plastic baggie and took out the perfectly clean magnet. All the scraps then fell directly into the bin. Luckily I didn't say anything that I was thinking, such as, 'old man why are you making a mess'. That was not the last time I learned something from my elders.
@royniederhiser9894
Жыл бұрын
Filling is what you put in a pie crust. Filings are small particles that come from rubbing a file against something.
@derrekvanee4567
2 жыл бұрын
Ah magnetic filling. My magnetic filings love filling up on magnetic fillings, the filling is extra sweet.
@mc_jojo3
2 жыл бұрын
DO NOT EAT Well there goes my evening plans...
@DJRockinRob
2 жыл бұрын
In my experience, compressed air is good at cleaning my magnets. (None are considered "Strong", just normal consumer neodymium or less)
@jcupcakes123
2 жыл бұрын
i used to play with littlest pet shops in the sand box when i was younger and i loved finding the lil bits of iron that stuck to their magnetic paw😁😆
@sneakyhub_
2 жыл бұрын
When cleaning it up put a bit of paper between the magnet and iron then once you find a place you want to store the iron. Bend the paper in half and pull the magnet off. It’ll then let all the fillings slide into the storage container.
@diggacha
Жыл бұрын
For magnetic finger printing dust, they have magnetic styluses that you can use to pick up excess fillings, then deactivate the magnetic tip (really you just slide the magnet away from the tip) to drop the fillings back in the jar.
@donovan8916
Жыл бұрын
I had a science expirament that said when you cool it down it looses strength when cold but also just wrap the magnet with ceran wrap and pull it off when done or scrape it off
@ratking1330
Жыл бұрын
Magnets stop working after they reach a certain temperature, so you could heat it up
@TheFreeBro
Жыл бұрын
It’s iron FILINGS not fillings. Like the debris caused by filing a sheet of iron with a file.
@darklordofsword
Жыл бұрын
Wrap your magnet inplastic wrap (cloth has pores the filings can go through or get stuck in) so you ca hold it over the jar and unwrap to remove the filings.
@Tnnels
2 жыл бұрын
Use a plastic and rubber polymer to reverse the polarity of the magnet ⚠️attention do not stand in front of it as metal could go flying into your skin⚠️
@nicstroud
Жыл бұрын
They are called 'iron filings' not 'iron fillings.' As in the result of _filing_ some iron.
@GoobleArk
2 жыл бұрын
There's a bag or cloth you could put over the magnet, and idk if it'd work but if you're not worried about the iron you could try like an ultrasonic cleaner or something like that
@DanielGBenesScienceShows
Жыл бұрын
A quart freezer zip-lock bag can be turned inside-out and placed over a magnet to keep the magnet clean. Then, when you’re done collecting fun ferrous materials you can simply re-invert the zip-lock bag around the material, gently pull it off and zip it right up! That’s how I do it. PS- Some of the tiny magnetic objects found in soil may be tiny meteorites!
@clintgillespie8579
Жыл бұрын
If you heat up a magnet really hot, it temporarily loses its magnetism. Also, you can you something sticky like duct tape to remove it.
@Corzappy
2 жыл бұрын
What if you snorted some iron fillings and then got an MRI scan? That’d be a trip.
@sparsons845
2 жыл бұрын
Didn't read the thumbnail. Just thought it was a sea urchin
@justeaden9568
Жыл бұрын
Honestly, if you knowingly and willingly eat iron fillings, it's just natural selection at that point
@treebeard840
2 жыл бұрын
Use 1 or 2 mil plastic to wrap around the magnet before. Or an inside out plastic bag. Simply turn the bag the right way and seal your filings.
@eg9939
2 жыл бұрын
That first part is more important than you think, 5G
@vizender
2 жыл бұрын
Next time you shoot magnetic particles at a strong magnet, you should just wrap the magnet in a plastic bag, that would be much easier to keep the magnet clean
@PythonPlusPlus
2 жыл бұрын
Get an electro-magnet that is stronger than the permanent magnet. You’ll be able to pull the iron filings, and turn the electro-magnet off to take the iron filings off.
@InfinityBS
2 жыл бұрын
Just a question, why should you not eat the cereal after extracting the iron?
@rmt3589
Жыл бұрын
This is expensive, but I think supercooling it will make it nonmagnetic. Might be something else I'm thinking, I'm tired rn.
@jordonmartin8034
2 жыл бұрын
I have to wash the magnets off inside of transmission pans when servicing them; I’ve noticed it’s generally easier than you think to just wash them off in the sink, you have to rub it a lot while washing it so I recommend using gloves, but honestly when you get it all wet it doesn’t seem to give me splinters.
@gitapushyangel463
2 жыл бұрын
The secret is putting the magnet into a thin plastic container that will allow you to lift the magnet out after collecting the shavings leaving the shavings on the bottom to drop off but a rag can often be used to wipe off the magnet but you will loose most of that flake inside the fibres
@erudite7885
2 жыл бұрын
Use a piece of paper or plastic wrap or a ziplock to wrap the magnet before you use it to pick up the iron, if you didn’t then you have to just scrape it off by hand… if you have powerful enough air pressure like your pneumatic launcher you can blast most of the iron off with just the air pressure… but you’ll need close to 90 psi to do it
@Akshat581
2 жыл бұрын
Died every time he said FILLINGS -_-
@nickburns8096
Жыл бұрын
The easiest way to keep the magnet clean is to put something over the surface that wont block the magnet, like paper or plastic wrap. Once you have stuff all over the magnet, the only thing you can really do is pull still off with your fingers or maybe a paper towel
@remcovanvliet3018
Жыл бұрын
Put the magnet in a plastic bag before picking up the fillings. Simply turn the bag inside out and pull off the magnet to bag up your iron powder.
@chrisdiddis9461
2 жыл бұрын
This guy is a strate up magnet themed super villain
@RotaryMarx
2 жыл бұрын
if you have a home appliance that uses lots of power like a steam iron thingy to straighten clothing, get the magnet close to the power cable, the magnet might move at 60hz or 50hz depending on your country.
@dolphinancestor1876
Жыл бұрын
All of the dirt and rocks in my area are VERY magnetic, and this is really cool..
@DustyHoney
Жыл бұрын
Back in the 2010s they used to sell kits of these as toys for kids.
@AngularHavok
2 жыл бұрын
You need a proper release valve. One that opens as fast as possible. I don't remember what it's called but mythbusters used them all the time
@OnexLen
Жыл бұрын
when I was a kid, me and my friends used to wrap magnets with paper then dump the magnet into soil then we'll get those black thingies, the metal fillings then get filtered by moving the magnet underneath the paper which holds the fillings then put them inside a jar I remembered that we does it every day for a whole month and we filled half of a bottle with it (the bottle is a bit small so yea)
@HHDarkHawk
2 жыл бұрын
I was about to say use a knife to get it off but then realized most are metal
@nathanhale7444
Жыл бұрын
If you go out in the yard or someplace where there's no structures you'll still find tiny iron fragments that are from the thousands of small meteorites that burn up in the earth's atmosphere every day
Пікірлер: 1,7 М.