Finally, someone who knows the nomenclature of all parts involved, this video looks and sounds much more professional than others found on KZitem. Good job Brownells.
@Wrensspeedshop
4 ай бұрын
Finally, someone that uses the word nomenclature!
@VincitOmniaVeritas7
Жыл бұрын
Never cared too much for the LAW tactical folder, until now: they just released a BCG with an integrated recoil system that doesn’t require a buffer tube, so you can run it even with a folded stock.
@XSpider209x
Жыл бұрын
What’s it called?
@VincitOmniaVeritas7
Жыл бұрын
@@XSpider209x ARIC buffer less BCG system
@XSpider209x
Жыл бұрын
@@VincitOmniaVeritas7 thanks brother 👍
@The-Bad-Boyscout
6 жыл бұрын
Thanks for mentioning the difference between the gen 2 and gen 3 models. I'm seeing the gen 2 available at a lower price than the gen 3 but didn't know the difference.
@MiamiNice57
9 жыл бұрын
Got mine a few days ago cant wait to put it on my lower...waiting for stamp..and waiting,,, and waiting. Love Brownells and love the new Law Gen3M no need for a special buffer retainer or spring to loose! Yippee! Nice job Mr. Law
@brownells
9 жыл бұрын
Yessssss
@216edwin
7 жыл бұрын
MiamiNice57 why you need a tax stamp for this if its going on a 16in riffle
@nomad155
2 жыл бұрын
@@216edwin they're doing an SBR.
@troybranch9720
3 жыл бұрын
Don't forget to put the takedown pin and spring back in before you put it on and torque it down
@user-co2wo7ej2f
3 жыл бұрын
And that is not easy!
@d.c.williams787
2 жыл бұрын
He left out a lot of minor details
@chrisolander43
3 жыл бұрын
Very informative, reminds me of school when i was a kid. Easy to understand and no fumbling of words.
@taylorbunch1490
2 жыл бұрын
Simple concise direction complete & well paced, especially for pause & repeat
@seanwattles9264
Ай бұрын
Awesome video! Installed without a hitch, now to get her out to the range for a real test. Thank you.
@FULLTIMEPUBLICATIONS
5 жыл бұрын
This helped me alot!!!! Great job sir.
@LordDirus007
7 ай бұрын
I like that it runs flush against the lower receiver without a second Castle Nut. The Second Castle Nut type, look goofy.
@MrJdog1987
Жыл бұрын
Really thinking about getting one for my midrange 308 ar10 rifle
@M4lh
11 ай бұрын
02:16 If that wrench is sold separately, what is the size?
@pablitopanes4872
5 ай бұрын
Damn it.. you covered with your hand that critical part when the part that holds on the receiver is inserted.
@JohnJones-vx7cr
3 ай бұрын
I own a new Saint Victor Law Enforcement Tactical with this device that was installed by Springfield Armory prior to me purchasing it. The problem is the bolt carrier extension appears to be slightly to long as when closing the stock from the folded to the closed position it catches and will not close without manual thumb pressure to properly align the carrier extension so it will close and lock in place. I have contacted the company and explained to problem and ent pictures. The extension is seated as far as it will go.
@556online
2 ай бұрын
Law tactical sells An alternate Bolt Carrier Extension will be available for bolt carriers with a smaller 1/2 diameter hole. I don’t know if it’s shorter or not but the fact they make a few different extensions means it’s not an1 size fits all. Brownells has a tech line if calling law tactical directly doesn’t get you anywhere
@reysy4929
4 жыл бұрын
How I installed the buffer retaining pin and tube. Unscrew the bolt from the bottom and removed, insert the pin retainer and spring from the bottom hole or screw the buffer tube to where it lines up on the pinhole of the buffer tube first, then install the screw back on the bottom hole to secure the retaining pin. I think that maybe the reason why they put it there. Great job on the video! I lost so many spring installing it the conventional way. Frustrating. :) You welcome.
@dylangokee5868
9 ай бұрын
This is a key part for me to. It allows you to pull the buffer retaining pin and spring FIRST. No more flying pin and spring
@joelaranjo2949
3 жыл бұрын
how do you get around using this on a 9mm carbine because the BCG is solid in back with no hole for extension peice ??????
@livefree5997
3 жыл бұрын
You have to buy one that has a removable weight in it.
@scottjackson1636
2 жыл бұрын
Now what do I do if the bolt has a weight in the rear? will the extension make up for it? do I need a special weight to replace it and leave enough room for the extension? If so where do I get one? The video was nice and informative, but did not once even hint at any of the problems one might run into or the solutions.
@crw7531
Жыл бұрын
I have that exact issue. After installing the Adapter & extension, the round is not extracted. I think the Carrier Group is traveling too fast or not far enough.
@garyh9039
Жыл бұрын
I don't see where you re-installed the take down spring and detent.
@JohnWicksPencil14
3 жыл бұрын
Any effect on reliability?
@dewit007
9 жыл бұрын
Awesome product!
@glennmartin3887
3 жыл бұрын
Can you use a one-point with this?
@Berion189
11 ай бұрын
The hinge seems to have seized in mine hence I can't fold it much less assemble as the pin won't come out due to the obstruction. I can't even loosen it up by unscrewing it with my 1/8 inch hex torque screwdriver. Is there a trick to this? Got it from Brownell's.
@carlosfernandez1
Жыл бұрын
I have an Aero Precision AR15. I have the flexing adapter but the nut of the breeze is so tight...it won't come loose. I'm using the Brownells tool. Can W-40 could be used?
@NeutralOne23
8 ай бұрын
So the bold carrier extender gets caught in the adaptor release mechanism when trying to charge a round. What am I doing wrong??
@Aron-ru5zk
6 жыл бұрын
how long till someone gets a bolt in their eye socket
@SteaIthyMan
5 жыл бұрын
lol
@garypulliam3740
4 жыл бұрын
Bwah!
@jesuschrist338
3 ай бұрын
One question,can you put it on T4E M4? And will it work like normal?
@moddkilla
3 жыл бұрын
Forever satisfaction guarantee bit at the end and sleek design just sold me on this.
@zeke2095
3 жыл бұрын
anyone know if this will properly fold a Magpul ACS stock? will the cheek rests be too big?
@1lthrnk
9 ай бұрын
What is the wrench used to take the buffer tube off ?
@kaosxunlimited5011
7 ай бұрын
That specific wrench is a castle nut wrench, but just look up ar15 wrench and you'll find some with a castle nut and barrel wrench in one
@danielvaladez3873
4 жыл бұрын
I cant find the information anywhere. Can I add this to my ar pistol and still keeping it legal?
@arnoldgallegos6247
4 жыл бұрын
@@GrayWolfeGaming you have to cut tube to keep length of pull legal. kzitem.info/news/bejne/zqOXtGiDrHxnp5g
@@arnoldgallegos6247 or you could not be a bitch and do whatever you want, don't talk about it or post it online and no one would ever know.
@Keystokash
Ай бұрын
That's what I wanna no
@earleverett75
Жыл бұрын
I wonder how this would work after you have modified The citadel boss 25 to take a adjustable stock
@johngrady8884
8 ай бұрын
Will any stock connect with this adapter or dose it take its own brand name stocks ?
@webb7903
2 жыл бұрын
hi, how do you adjust the tension on the swing of the law folder? I tighted the screw on the hinge as tight as I could but the the folder [when opened] still swings freely without any tension. Thanks
@premyslkyselak1427
6 жыл бұрын
Hi guys. One question. It is described to fit the 308 cal. How´s that possible? The M4/M16 buffer tubes have different diameter to the 308. Can you explain?
@RubenGarcia-fv4wg
6 жыл бұрын
Premysl Kyselak ive seen people install them on 308 type rifles check thier website
@yvestendon4411
2 жыл бұрын
what is the result during firing without unfolding
@goatlocker219
2 жыл бұрын
probably a broken collar bone, from the bolt flying back.
@vmartinez2334
2 ай бұрын
Without buffer, I think one shot max.
@crw7531
2 жыл бұрын
great instruction. works perfect!
@rodneyjenkins5538
Ай бұрын
Can you shoot in folded position
@GarryBurfus
9 жыл бұрын
Very nice but will these work with a PWS 416 buffer tube?
@Felkins
6 жыл бұрын
Will this work with the Tailhook Mod 2 brace? Thanks!
@oldmustang-1969
3 жыл бұрын
Good information since no directions from a Chinese knock off I bought. But like the Chinese web site I bought it from this is not made from steel . Call it a alloy at least .Better yet try aircraft grade aluminum . Truly thank you for clear concise directions
@quintonjewett5265
3 жыл бұрын
Hope this works on my core15
@surviveamerica
3 жыл бұрын
You need to look into a company called Titan Tactic. They are using this video on their website as an install video for the knockoff adapter they are selling
@sammiskie1127
2 жыл бұрын
They are a Chinese scam artist company.
@sonyj87
9 жыл бұрын
Finally
@hxdaro
2 жыл бұрын
I like the short format tutorials that aren't 10 minutse long
@chambo5554
11 ай бұрын
Would help to mention how many turns to install stock thread into the foldin part. Also. Small spring ejjected from the lowrr receiver. You dont mention thst ir the purpose it serves.
@vmartinez2334
2 ай бұрын
I wonder if that's why I cannot cycle bolt
@rockyshropshire9851
Жыл бұрын
I'd like to know how much for this
@Talen-qs1wr
Жыл бұрын
Will this work with 300 blackout?
@thegrandmasternick
Жыл бұрын
My bolt extension did not go in that easily. Had to hammer mine in. Anyone else experienced this?
@Huntatroll
7 ай бұрын
mine was tight but not that tight
@GriggsKnives
3 жыл бұрын
Definitely a helpful video
@crazywheelsairsoft9367
7 жыл бұрын
I like that folding stock nice
@NBWDOUGHBOY
3 жыл бұрын
Great Tutorial
@kenyrios4841
2 жыл бұрын
Do you remove the receiver end plate?
@krakeneleven5294
3 жыл бұрын
Does it fit on a ZPAP85 AK with SBA3?
@cudan2941
3 жыл бұрын
ITS IN STOCK, ITS FINALLY IN STOCK! Im broke asf rn but had to order it. Time for some Ramen!
@0neMoment
2 жыл бұрын
What type of tool was used to tighten/loosen the castle nut ?
@Seventhcause
2 жыл бұрын
Castle wrench lol
@astoica1
2 жыл бұрын
He forgot to put back the spring in the upper.
@phab2808
9 жыл бұрын
Drop tests please.
@Kgoutdoor
7 ай бұрын
lol it doesn’t come with the Allen wrench. I’m looking at a 50 cent at cost Allen wrenches yet don’t have that one. Now my gun is in pieces and So far this is extremely frustrating. May just send it back. I can’t even figure out how to open the main component.
@CalebSavant
7 ай бұрын
I would recommend investing in basic tools if you're going to do your own gun work friend.
@PBerBlueCobra
4 жыл бұрын
My pistol shot great and then once I put this on it. It seems to be under gassed.. do I need a different buffer spring? One of my bolts broke.. Help.
@arnoldgallegos6247
4 жыл бұрын
More likely need a different buffer weight
@cliffordlatko1901
2 жыл бұрын
What states are these legal in?
@markpotter2485
3 жыл бұрын
My AR 9 bolt is solid in the rear. Can I still use this without the bolt extention. FWIW mine came with zero instructions or the little butterfly wrench.
@ahatzigiannidis
3 жыл бұрын
i need to know too, same thing i have an 8 oz buffer but the adapter is kinda useless with my ar 9.
@markpotter2485
3 жыл бұрын
@@ahatzigiannidis And after 4 months, no reply. Thanks for nothing!!
@ISOOxDrummer
8 жыл бұрын
Would this work on an AK with an M4 stock adapter?! Like the Rifle Dynamics one.
@brownells
8 жыл бұрын
Unfortunately this will not.
@RaftGuidePhil
6 жыл бұрын
Actually Jim at RD has figured out a way to make it work. I’m sure if you contact RD they can help you out.
@Paco-hh4jd
Жыл бұрын
How likely is it for the extension to pop out?
@حبيبالزيدي-ن4غ
5 ай бұрын
Hello how can I buy
@aks_ak
2 жыл бұрын
what happens if you shoot when its folded?
@tedphips23
Жыл бұрын
It’ll shoot one round but when the bcg comes back the buffer won’t be there to send it back into battery.
@МатвейМалинин-щ4ф
3 жыл бұрын
Показали бы, что сложенная не фурычит.
@allseriousness
8 жыл бұрын
I NEED THIS
@maybeyournextdoorneighbor
9 ай бұрын
I can't open or close my folder how tf does this thing work
@jgarza9809
3 ай бұрын
Same... How did you fix the issue?
@joeyschmeisser
2 жыл бұрын
My bolt carrier group got stock out. How i get it back in????
@kchedville
2 жыл бұрын
Question anyone -- at (3:33) the Buffer Tube looks like it is holding down the Buffer Retainer as he puts the Buffer Spring back into the Tube, is that the correct way?
@eggmynog
Жыл бұрын
Yes
@nicknull5206
8 ай бұрын
Thanks for your comment. This was jamming me up as he didn’t explain this important detail.
@reamsgregoryb
3 жыл бұрын
This will work for a 7.62x39 bolt right? Since 308 is technically a 7.62x54 or something like that?
@haljordan2197
3 жыл бұрын
I don't believe it will unless it's an AR platform AK.
@reamsgregoryb
3 жыл бұрын
@@haljordan2197 ya I got an ar pistol chambered in 7.62
@JAmes-no4yk
4 жыл бұрын
If I want to change out the charging handle, do I have to take the law folder off?
@MrDang13
4 жыл бұрын
You'll have to open the folder, remove the extension from the BCG, push the BCG back in and then you'll he able to release the takedown pin
@ernestpaul2484
3 жыл бұрын
Being that the BCG is in the upper receiver and the LAW folder is in the lower receiver, you fold the stock to the side, push the release bottom, slide the bolt to the rear to remove extension, disengage rear takedown pin, pivot upper and slide BCG rearward to remove charging handle. No reason to remove folder unless I am completely jacked up.
@briantmartin83
6 жыл бұрын
ALIEXPRESS CHINA VERSION... $22 I bought 2 and modified the locking assembly to include a steel pin and modified the BCG extension with a dremel. Its 10 times lighter made from solid milled aluminium and have put about 600 rounds down range with it.
@brianemery8945
6 жыл бұрын
B Martin what did u use for the hinge pin? also exactly what did you dremel on the extension? very curious. thanks
@salvathan
5 жыл бұрын
also interested on the procedure
@christiansecor1031
5 жыл бұрын
B Martin how is the quality? Do you have to constantly tighten it?
@dallas5374
4 жыл бұрын
B Martin want a cookie?
@AcheronLV-426
6 жыл бұрын
Does anyone know if this folds flat or not?
@abdulrasheedomar5796
2 жыл бұрын
What is the price of foldind
@krs120
2 жыл бұрын
Can I put it on a mossber 590
@papoguapo8066
3 жыл бұрын
when its folded can you shoot normally ??
@Pyreleaf
3 жыл бұрын
Papo Guapo no. Best case scenario, you get one shot and it won't cycle. Worst case, you get a face full of burning gas and particulates and maybe the BCG flies out and clocks you in the throat.
@kendaldk5634
2 жыл бұрын
Lol no not unless you want the bolt carrier to go flying into your shoulder.
@surfr23
8 жыл бұрын
Will this attach to a CZ Scorpion EVO?
@brownells
8 жыл бұрын
No, the LAW folder would probably not work with the CZ Scorpion Evo.
@vinnivinzii
4 жыл бұрын
Perfect for paratroopers
@thelaw9311
Жыл бұрын
My buffer and retaining spring look nothing like the one shown in this video
@BrianWood777
4 жыл бұрын
Can I told a B5 stock to the side? It won't be too wide?
@ysnbaby7625
2 жыл бұрын
How much is it ?
@ninjafalco
9 жыл бұрын
Swhy didnt I think of this?
@diverdave76
3 жыл бұрын
The hinge on mine snapped in half the very first time I attempted to close it after installation
@rekzzz14
3 жыл бұрын
anybody here knows the torque on that flange tool? i lost mine and shipping is more expensive than the tool. Thanks
@SnaketheJake87
3 жыл бұрын
For $280... that's a hard pass.
@rankang2194
3 жыл бұрын
Sorry but the Law Tactical is far too heavy. The Sylvan Arms Folding adapter is much lighter and $100+ less expensive.
@thegolflife7565
5 жыл бұрын
Wish they made this in titanium or 2055 lithium aluminum or magnesium to make it lighter...
@Tarsarian
4 жыл бұрын
I've seen some aluminum versions but they seem to be easy to break. The steel part is heavy and does add considerable amount of weight.
@QRFCombatVET
9 жыл бұрын
$250 way too expensive.. Also you can NOT fire it from the folded position, well that just sucks. So it helps you shorten the length to put into a backpack but other than that it is pointless and stupid especially for $250
@brownells
9 жыл бұрын
One cannot fire from the folded position unfortunately.
@spongebug2
9 жыл бұрын
if you want an ar that has a folding stock that can be fired while folded, go look at the rock river arms lar-pds, they have the 16 inch full length rifle or you can look at the pistol that they offer and register it as an sbr and add the folding stock at a later date, and yes it is expensive, but it works
@Nordic_Goon
9 жыл бұрын
+Brownells, Inc. Unless you buy it to put on the mini14 with a Clyde Armory scar chassis :D
@CHI-TOWN_FELON_
8 жыл бұрын
+spongebug2 Or get a sig 556xi you can fire that when stock is folded
@agentxiiihh7227
6 жыл бұрын
Dead foot arms does has that now
@Kgoutdoor
7 ай бұрын
It blows my mind that law tactical wouldn’t include a 50 cent 9/64 Allen key when I spent over $200 on this. Just that alone mixed with the fact that It’s extremely confusing to install. Fixing to just get my money back. Not worth the headache.
@CalebSavant
7 ай бұрын
Give Brownells a call, they'll help you install on the phone.
@keithw4039
9 жыл бұрын
Some idiot will fire it with it open and.....
@guyguyga1
6 жыл бұрын
And nothing will happen. The gun simply won't cycle, but will still fire just fine. It simply wears down the parts a little faster than normal.
@Aron-ru5zk
6 жыл бұрын
guyguyga1 I’m pretty sure the bolt will fly out the back of the gun
@guyguyga1
6 жыл бұрын
TagDelta 915 I'm pretty sure you don't know you're talking about. The gen 3 is designed to withstand a shot while folded just in case someone is either stupid, curious, or both. Go look up videos of it.
@Aron-ru5zk
6 жыл бұрын
guyguyga1 we can still see what the original comment said in our notifications
@guyguyga1
6 жыл бұрын
good for you?
@ericdoubleu5390
3 жыл бұрын
9/64. Come on man!! It’s not an any set of my keys lol
@jerrellderrick457
2 жыл бұрын
Very good skipped a few things and good views but hi
@bassgod8971
2 жыл бұрын
Excuse me why the fuck is it so expensive. Like what about this is making It almost 300 dollars
@forrestgumball
6 жыл бұрын
Only a chump will buy this full price!
@strongblackliquor
4 жыл бұрын
Will this folding stock adapter work with a single point backplate? I'm worried it wouldn't fold all the way flush with the receiver.
@oscarbarahona5419
4 жыл бұрын
Yeah it dose because the buffer tube, castle nut and end plate are all installed on the back of the folder
@7.62x39mm
4 жыл бұрын
$250 what the actual fuck?
@johndegidio8501
4 жыл бұрын
It’s way too expensive!
@t77snapshot
3 жыл бұрын
The Sylvan Arms gen3 is 149, reviews look good
@user-hh4hc2lt6e
3 жыл бұрын
@@t77snapshot nope, it’s a piece of shit. Not steel, adds more length than this. The bearings that hold it open go out very quickly, and it has major malfunction issues. I was gonna get the sylvan arms.. but why not just pay another 100 for top of the line quality, used by military.. go law tactical! It’s the proven OG..!
@dresoto3188
2 жыл бұрын
Cant fire while folded sucks..
@maxtheroofer8004
2 жыл бұрын
ITS an AR, you dont understand how they work?
@MC-zr7hl
2 жыл бұрын
@@maxtheroofer8004 lol the amount of complaints here about this is frightening
@son_of_guns
2 жыл бұрын
Maybe because of price they assume it changes the DI operating system, maybe they need to change systems and not have worry about it
Пікірлер: 186