this was very helpful, but can you please explain what each of the blades would be used for. thank you
@congeeearl390
2 ай бұрын
Please refer to this link: imgur.com/F06f5MY.
@sandraspear4590
2 ай бұрын
@@congeeearl390
@101072ob
Ай бұрын
How do charge the battery
@jichangfan5481
26 күн бұрын
@@101072obit comes with a power cord
@rubyrey932
Ай бұрын
What is the small shield for? I'm very frustrated with the poor instruction manual. There should be a complete book on how to use this machine.
@marywestbrook-geha6497
2 ай бұрын
The instructions were very good for assembly. But you should tell us which blades to use for what jobs. Also, when or why to use the smaller protection guard versus the large one with wheels. I'm going to try to find the sales ad on Facebook and see if there are any clues there; I seem to remember lots of demo videos when I bought the machine.
@jichangfan5481
26 күн бұрын
Yeah I was thinking that too, but at least this information is better than the pamphlet that came with it..😊 the smaller guard would be for when using it as a whipper snipper, mine also came with 2 wire cable blades like the plastic cable for whipper snipping. Not sure what country you are from but. I’m in Australia If you are from USA you probably call it a weed whacker?
@priscillawaite8419
2 ай бұрын
Alloy saw blades cutting stalks or branches Stainless Steel Blades for weeds Plastic blades for small soft lawn
@nandaalmeida4394
4 ай бұрын
Pls provide information about the use of each blade. It’s really confusing
@congeeearl390
2 ай бұрын
Please refer to this link: imgur.com/F06f5MY.
@PAC63
Ай бұрын
@@congeeearl390your link doesn’t work!
@20thcenturykiwi
Ай бұрын
Please can you explain when or why to use the smaller protection guard versus the large one ? Thx!
@karentreloggen9442
2 ай бұрын
What are the different blades for.
@greekchick007
8 күн бұрын
With this I received plastic square things with wire sticking out on each side could someone tell me what these are used for?
@seemarani5270
26 күн бұрын
My machine isn’t working
@Donna-tg4qj
Ай бұрын
I’m pissed! The large shield has 2 small and 2 large openings to seat on unit. How can you line up the holes for the screw ( shield to motor when the cutouts on the shield don’t match the tab placement on motor??? Plus, this company is well insulated from customer calls for help. Save yourself the frustration!
@jichangfan5481
26 күн бұрын
You have to manoeuvre it to the right of that screw hole it will then drop into place and you then twist back to the screw hole position to insert the screw, I slowed down and rewatched video several times he does actually show you this manoeuvre it’s just quickly done.😊
@mabelhernandez2070
2 ай бұрын
What each blade use for?
@elizabethcardenas953
2 ай бұрын
Está muy corto el video deben de explicar bien cómo usar todas las navajas 😮
@geneyoder7201
Ай бұрын
Please inform me how to charge the batteries
@lindadixon5190
Ай бұрын
Hi. What kind of batteries are those? What brand, what voltage (21V, 24V), and where can purchase some?
@gitmellgren7332
2 ай бұрын
It is not possible to tighten the screws because there is a blue stop on the nut.
@congeeearl390
2 ай бұрын
Could you please consider using a wrench to tighten the screw? The blue stop on the nut is intended to prevent the screw from falling off automatically.
@HarwinderSingh-fk5vw
2 ай бұрын
It is tightened just hold the screw into the gap at screw point
@LouiseMontgomery-b8v
Ай бұрын
One of the wheel nuts was cross threaded on there and difficult to get off then to go back on. They did not say where the washer goes on either of the instructions for the two different types of washers. They should have also said something about which side goes on first with the lock safe nuts for the wheels. The screw to be removed for guard installation would not come off. It was too tight for the tool provided. I managed. It is assembled now. However, 1 question, was I supposed to put the small guard on around the front, as well as the large guard around the front? I could not find where to plug the battery charger plug into the battery. It would have been helpful to mention that as I have not had batteries charging like that before. Looking forward to using it now. Thanks.
@geneyoder7201
Ай бұрын
How do I charge the batteries?
@jessievaetoe926
Ай бұрын
How do you know which is the correct side of the big blade?
@daisy4life633
25 күн бұрын
I had to replay it. When he puts in the correct side, look at the direction of the serrated edges.
@karenkey2684
2 ай бұрын
What is each blade used for
@dannymoses1239
2 ай бұрын
How long to charge the battery? How many hours?
@onexpressocafe1821
Ай бұрын
The instructions state 2 hours for the battery charging time.
@JAngelaStevens
8 сағат бұрын
What does the charger look like? The batteries are crap.
@josun2222
Ай бұрын
You said one side of the blade was wrong and one was right but you didn’t say how to distinguish the right side to use. Each side appears the same to me!
@daisy4life633
25 күн бұрын
I had to replay it. Look at the direction of the serrated edges when he changes it to the correct direction.
@PAC63
Ай бұрын
What if you don’t want to use the wheels?
@vangelina09
Ай бұрын
I think that’s when you’d change to the small guard, cos the big one comes off with the wheels
@janetassal
3 ай бұрын
How to charge the battery ? Please help
@congeeearl390
2 ай бұрын
Please refer to this link: imgur.com/DWJmv9K
@onexpressocafe1821
Ай бұрын
The instructions state that it takes 2 hours for charging the battery.
Пікірлер: 40