Dude, you're supposed to finger wipe perimeter of tile when laid, so next one doesn't squish thinset/mortar up between tile joints. And you're not wet sponging floor before spreading thinset, and you're irregular spreading pattern of thinset hurts to watch. definitely wrong. That's ameteur, nice you watched someone elses youtube video and used tile raisers...
@ralphgabrielgabuya6457
2 ай бұрын
❤
@jeremy8144
2 ай бұрын
This is objectively bad work
@Spoonfed78
3 ай бұрын
Depends on country but seemingly not concrete subfloor so I'd imagine should be waterproofed and have fall to a waste if it's a bathroom? Different skill level tiling to fall vs flat floor
@MrRdt1970
3 ай бұрын
Where is the flex membrane
@herbertvonsauerkrautunterh2513
4 ай бұрын
Not even trowling the adhesive right. Lol
@LuisIbarra-cq9uu
4 ай бұрын
How not to do tile
@yonettekelly2406
5 ай бұрын
The only thing that a bit hard for me is to cut the tiles 😂
@Bangbangbigelow
6 ай бұрын
Man this guy works fast!
@wally_912
6 ай бұрын
No mesh tape on the joints?
@Breadboi_vr
7 ай бұрын
No underlay like ditramat?
@YourmomshouseXD
7 ай бұрын
Beg someone tell me the equipment and that for a job i have
@GeorgiTsvfaceoff
8 ай бұрын
What is that metal slit at the end of the door called??
@dariousbobbett7222
6 ай бұрын
Shluter
@davidoconnor7828
8 ай бұрын
And not a level touched once. 😅
@Petejones69
8 ай бұрын
Right? Why use them if you aren’t going to check level?
@Thewoodsman894
8 ай бұрын
I’m pretty sure that the packers with the wedge going through it does that job for you, not the tilers problem if the carpenter put the floor in level , refuse the job and make the carpenter correct the mistake💀😂
@marcogamez3350
8 ай бұрын
No mesh tape on the joins??? No no no.
@emmasmith4416
4 ай бұрын
Was about to say this ha!
@raascodiaz362
10 ай бұрын
Cheap labor is not skilled Skilled labor is not cheap
@Will-nb8qk
11 ай бұрын
Troweling should be in straight lines. Releasing of the air is what gives suction to the tile.
@1957346
9 ай бұрын
Exactly 💯
@frowncrownproduction3878
9 ай бұрын
Thank you Mr.professional 🙌🙌🙌😂
@Will-nb8qk
9 ай бұрын
@@frowncrownproduction3878 : No worries 36 years in trade and counting tbh
@urnew
6 ай бұрын
Nobody cares anymore 😂
@Will-nb8qk
6 ай бұрын
@@urnew : They should.
@BonBon770
11 ай бұрын
You forgot the key in the substrate
@kodyo1017
11 ай бұрын
No waterproofing?
@Will-nb8qk
11 ай бұрын
Probably just a dry area so not required. P.S I take that back, the title is bathroom floor. 🤔
@renszatrapp9639
11 ай бұрын
How do you remove the spacers which are UNDERNEATH the tiles,without disturbing the tiles, specially as the adhesive will have hardened?
@andrewmax9490
11 ай бұрын
they snap off the top and your grout over it
@Jakegarc1a
11 ай бұрын
I’ve seen mf’s kick them after they are done curing the next day. Apparently some of it stays behind underneath the tile. I mean think about it the spacer works double to level the squares w/ each other. Or at least that’s what I assume from seeing how it’s placed.
@phillipe124
5 ай бұрын
These things can be a nightmare. As others have said, they snap off but quite often they stand proud of the tile. After that it's messing around for ages to get them beneath the tile.
@donaldzaja5369
11 ай бұрын
Hi this is quatz tiles or porcelain?
@bradhardison5259
Жыл бұрын
There’s a flat side of the trowel for a reason
@Vidocq292
Жыл бұрын
Not proffesional. The mortar should be straight all time. But still...better than beginners
Пікірлер: 38