Great work as usual. Speaking as a roofer/leadworker I have no issue with how you've detailed this.
@clivefox5072
2 жыл бұрын
Agree
@Cris.d.em71
2 жыл бұрын
2 things that set my roofing ocd off... Excellent work as per usual Stuart... But I’m a advocate for nice clean lines around a chimney So bringing the step flashing out over the slates is something I personally would not do .. But that’s my ocd at work (literally..!) And No:2 is ... I noticed when u walked around the roofer had opted for a cement/undercloak Verge on a slate roof...! Not only that but it was full of expanding foam as a dub coat ...! Which to me means more work and more eventual maintenance when it starts falling out over time .... Never understood doing cement verges on slate... and on a new roof as well... Absolutely no need in my opinion... But apart from that.... Excellent work my friend.. Cheers Chris..👍🇬🇧
@slbleadworks
2 жыл бұрын
Thank you. To be honest I hardly ever bring the lead out onto slates. But I actually quite like the look and it matches all the other elements of the chimney weathering that also come out away from the stack.
@Cris.d.em71
2 жыл бұрын
slb lead works I know wot u mean Stuart... I must confess I do do it if it’s on a profile tile chimney... There’s something about the symetricallity of the chimney being square and the lead being proportionally square around it..(if the chimney is in the middle of the roof ..)...coupled with the squareness of the profile tile and the lead dressed squarely into it ... with the same profile pattern spreading over the squareness of the whole side Of the roof.. is a beautiful thing to behold....(see, I also have roofing ocd..!) but the best part is u know the customers eye is gonna be drawn to the shining freshly paternated jewel in the center of it... And that’s exactly as it should be... Cos a well executed piece of leadwork on view to all is always a thing to admire... and is always the thing that sets the job off the most and is the bit yr always most proud of as it is a true measure of the skill of the tradesman... And u sir... should be ,as I’m sure u are... very proud of yr work....as I am grateful to u for showing it to us to admire ..,and relieved to know that out there.. art such as this .. carried out by a true artisan and master of his craft exists for those initiated & uninitiated to admire ... and also showing an excellent standard to workmanship level to strive to when doing yr own work.... Always a pleasure to watch yr videos... May there be many more my friend ... Much love to u and yr family Chris...👍🙏🇬🇧
@alexferguson9283
2 жыл бұрын
Always enjoy you vlogs, Stuart. Lovely workmanship as usual. 👍🏻
@slbleadworks
2 жыл бұрын
Thank you Alex
@Cris.d.em71
2 жыл бұрын
2 things that set my roofing ocd off... Excellent work as per usual Stuart... But I’m a advocate for nice clean lines around a chimney So bringing the step flashing out over the slates is something I personally would not do .. But that’s my ocd at work (literally..!) And No:2 is ... I noticed when u walked around the roofer had opted for a cement/undercloak Verge on a slate roof...! Not only that but it was full of expanding foam as a dub coat ...! Which to me means more work and more eventual maintenance when it starts falling out over time .... Never understood doing cement verges on slate... and on a new roof as well... Absolutely no need in my opinion... But apart from that.... Excellent work my friend.. Cheers Chris..👍🇬🇧
@slbleadworks
2 жыл бұрын
Hi Chris thank you. To be honest I usually don’t bring the lead out onto the roof unless I need too. I know that a normal step flashing would have been sufficient. I do however quite like the look of a step and cover on slate but I’d say 9 times out of 10 I just do a normal step flashing. As to the roofing side of things I’ve seen the roofer run the verge all different kind of ways. Sometimes he uses slates. I’ve also seen him use tiles before.
@SocialistChampagne
2 жыл бұрын
I really agree with you about the verge Cris, it’s shockingly poor form on the roofer’s part…
@TheToolnut
2 жыл бұрын
On a slate roof I just use a slate trim to finish the verge, 👍🔨🇮🇪
@Cris.d.em71
2 жыл бұрын
@@TheToolnut if the gable end barge boards are put up as high as the batten ends u shouldn’t need a trim at all…👍
@TheToolnut
2 жыл бұрын
@@Cris.d.em71 I like to hang the slate out over the barge by an inch or so. There's a bit of play with the trims so I can gauge out the roof for fulls, slate and a half or doubles. The trim gives a nice finish to the verge as well I believe.
@babbapappa1
2 жыл бұрын
Could've done with this video 6 mths ago 😂 cracking work as ever Stuart 👌 Re the flashing sitting on top of the slates speaking as a non roofer, I didn't know it could be an option so really glad to see other ways of doing things🙏
@slbleadworks
2 жыл бұрын
Thank you. Yes this can be done like this although bringing the lead out like this is usually only used on single lap tiles. A normal 150 step flashing would have been sufficient.
@sunglassesron
2 жыл бұрын
Top work as always love these videos of people who know what they are doing hope you get paid top money because what you do many roofers carnt do
@slbleadworks
2 жыл бұрын
Thank you I’m glad your liking the vids. Well I wouldn’t say I get paid top money. The truth is Id probably earn more if I threw it in and didn’t care what it looks like. But it’s not me. Id rather spend longer on a job and walk away happy that I’ve done a good job.
@sunglassesron
2 жыл бұрын
Always keep the standard up the ones that dog it in might make more in the short term but don’t last very long in my experience. The people who do the best work will always have work.
@JoesGuitar
Жыл бұрын
Hi Stuart. Loving the videos and it’s brilliant that you’ve started showing more of the process! Really appreciate it! Any tips on installing a back-gutter without welding gear? Thanks for sharing your work/craft/skills!
@slbleadworks
Жыл бұрын
Thank you I’m glad your enjoying the vids and yes I’m trying to show more of the process now when ever I can. I’m hoping to invest in a mic soon to make the audio quality better too. To boss a back gutter I would say allow plenty of time. And make sure your using code 5 at least. To be honest I haven’t done this since my college days.
@peterdawson5115
2 жыл бұрын
Very neat and tidy job. 👍
@slbleadworks
2 жыл бұрын
Thank you
@paultweedley2026
8 ай бұрын
Hi there, great vid, l think the tin soakers are corroded under my flashing, do you think your style of flashing over the slate as per this video probably means l can bypass the soakers issue and fit new step flashing in your method here? Thanks
@slbleadworks
8 ай бұрын
Thank you and thanks for watching. If I was you ld replace the soakers as you still need them even though I have brought the lead over the slates. You can still get something known as the angle of creep. As the water works its way under the lead it will slowly start to work its way towards the stack.
@siteseeing7150
2 жыл бұрын
love your work bud.
@slbleadworks
2 жыл бұрын
Thank you. And thanks for taking the time to leave a comment. Are you in the trade ?.
@siteseeing7150
2 жыл бұрын
@@slbleadworks i was a roofer for years and often wanted to do lead work but never really got to do that much ,however im getting a kit from noz-alls to do some welding with the CWS model o torch like yours. i always wait to see your work and keep it going.
@Known-unknowns
9 ай бұрын
I suppose if it doesn’t leak you can do what you want. However, we only put lead UNDER natural slate / man made slate and OVER concrete tiles. I’ve seen you do the complete opposite ?? Next time you’re out driving around take a look at other roofs and see how others do it . I think you’ll find lead on top of slate is a complete no no.
@slbleadworks
9 ай бұрын
I think we will have to agree to disagree on that one. But thanks for watching.
@Known-unknowns
8 ай бұрын
@@slbleadworks Ask an Architect what soakers are ?
@paultweedley2026
8 ай бұрын
I get that it's standard practice to put lead under slate but why is that so?? Is it to do with appearance to the eye (how it looks from the street) or that it may move in a storm? Just curious because as you say lead is layed over concrete tiles and l guess the lead doesn't move off the tile in a storm.
@markhoulding1938
2 жыл бұрын
Looks great 👍
@slbleadworks
2 жыл бұрын
Thank you
@leemcgowan2050
2 жыл бұрын
Unbelievable Stewart 👍
@slbleadworks
2 жыл бұрын
Thank you
@leemcgowan2050
2 жыл бұрын
Hi Stewart how do you make the lead look like a pie 🥧 edging. Like when you do scollop lead. Or just flashing some jobs. I see some one on you tube do it can’t find em.
@Roofer89
2 жыл бұрын
Quality work mate ! I would like to see you actually do the work . Haven’t you got a labourer to film you ?
@slbleadworks
2 жыл бұрын
Thank you. No I always work on my own. I was thinking about getting a go pro so I can film more of the process.
@Roofer89
2 жыл бұрын
@@slbleadworks your work is quality would like to see you doing the process of what you do mate maybe get a tripod and sit on the scaffold ??
@chevking4127
Жыл бұрын
Or did u weld it
@slbleadworks
Жыл бұрын
Yes they are welded. Thanks for watching.
@kevindavis2611
Жыл бұрын
Hello. Can I ask if the back flashing goes under or over the felt?
@slbleadworks
Жыл бұрын
The felt goes over the back gutter
@kevindavis2611
Жыл бұрын
Okay, makes sense. I have enjoyed watching all your work, it looks amazing. do you do that with a 2nd piece folded under a join higher up, so in effect there is 2 layers of felt with the back gutter in between? or can you just slide the back gutter under the existing felt? I find this is is the part that is most critical, would be great to see a video of just this piece if there is one?
@jimwalshe9077
Жыл бұрын
Well done
@slbleadworks
Жыл бұрын
Thank you and thanks for watching
@neilrafferty2097
2 жыл бұрын
Perfect apart from the aerial and dish !
@slbleadworks
2 жыл бұрын
Yes they always seem to be in the way
@neilrafferty2097
2 жыл бұрын
@@slbleadworks No matter, tho,a lovely job.
@PeakyBlinder
2 жыл бұрын
Another tip, especially if you have OCD, Chase your joints while felt and battened, never on the finished roof. School boy error. And store your lead in the dry, that oxidation looks discusting. Your OCD is broken. Lol
@slbleadworks
2 жыл бұрын
Yes In a perfect world it would be ideal to chase the joints out before it’s slated. But this is an occupied property. The existing lead had to be kept in to keep it watertight until it was ready for new leadwork. Also as already mentioned I didn’t supply the lead and had no control over where it was stored. I hate oxidisation on lead too. But you can only work with what your given. And actually once it was oiled it was hardy noticed. Believe me my OCD is fully working.
@PeakyBlinder
2 жыл бұрын
@@slbleadworks lol, fair play. I would have bollocked the client for lead storage as oil won't remove the oxidising, And as for the lead had to be left in place that is just incorrect as after 42 years in the game I have always chased the walls at the stripping stage and have never has ingress issues. Try it, It will improve your videos and stop assolez like me picking out every mistake. Keep up the good work.
@thedarkhugheshughes2640
Жыл бұрын
Why did you leave the return on the step flashings
@slbleadworks
Жыл бұрын
Just because it was the look the client wanted.
@thedarkhugheshughes2640
Жыл бұрын
Thanks for the reply
@chevking4127
Жыл бұрын
You haven’t dressed the front tray around the corner
@slbleadworks
Жыл бұрын
Yes it’s a 150mm welded corner to the front apron.
@PeakyBlinder
2 жыл бұрын
Tap it up with the tapper
@slbleadworks
2 жыл бұрын
You got it
@kevincasson9848
Жыл бұрын
No need to put extened lead on step flashimg on to slates. It looks a mess. Just step flash into soakers!!
@slbleadworks
Жыл бұрын
Yes i know it’s not needed but the customer wanted it
@kevincasson9848
Жыл бұрын
@@slbleadworks fair comment mate! Sorry!
@strummer6642
Жыл бұрын
You don't do step and cover on slate, end of. Flashing and soakers, simples.
@slbleadworks
Жыл бұрын
Thanks for watching
@PeakyBlinder
2 жыл бұрын
Aluminium soakers tut tut, on natural slate, 🤔
@mat1329
2 жыл бұрын
Lsa spec lead on lead
@slbleadworks
2 жыл бұрын
These are zinc soakers the roofers use. But I know really they should be using lead.
@WApnj
Жыл бұрын
That is a terrible way to counterflash. It is not water tight. Wind blown rain gets in at every course.
@slbleadworks
Жыл бұрын
Thanks for watching.
@tk2097
2 жыл бұрын
Mate, get a go pro and film the work.
@slbleadworks
2 жыл бұрын
Yes I think I need to look into it.
@mat1329
2 жыл бұрын
Try using a new but of lead not some old oxide bit been left in damp stores Yh and wat the other guy said Ali soakers on lead tut tut no guarantee on that work
@slbleadworks
2 жыл бұрын
These are not aluminium soakers they are zinc. Zinc soakers will not deteriorate when in contact with lead like aluminium does. Also I did not supply the materials and I can only work with what I’ve been given.
@PeakyBlinder
2 жыл бұрын
Oh it never stops to fuel, That lovely slate roof, What on earth is undercloak doing on a slat roof. Jesus Christ this gets worse by the minuet. Have a word stu you customers are making you look a right twat. Surly you should have pointed this out to them. Don't tell me that they are going to point that with cement. That will be on.the floor in a year.
@slbleadworks
2 жыл бұрын
I just do the lead side of things I wouldn’t know about the slates etc.
@garydoherty9399
2 жыл бұрын
Don't like the way u turned the lead out untidy looking and no need for it as soakers are in
@slbleadworks
2 жыл бұрын
Your not alone on this one
@PeakyBlinder
2 жыл бұрын
Please never use cover on slate or plain tile, It's a definite waste of lead and does absolutely nothing.
@PeakyBlinder
2 жыл бұрын
@@slbleadworks a Slater worth his salts would not have cover flashings, It just don't belong lol. Keep up the superb lead work though, Great vids.
@clivefox5072
2 жыл бұрын
I live in South of England and been Roofing for 32 years and fit step cover flashings to many chimneys with slate and plain tiles, specially along coastal areas, you will find most chimneys have them in this area. So in my eyes not a waste of time, if fitted correctly work perfectly OK and out performs just a step flashing. Some jobs I go to can be up to 80 years old and still performing, the old timer's knew there stuff.
@tk2097
2 жыл бұрын
@@clivefox5072 as long as it's bossed in neatly I've no issues but I often see it done like this because they haven't fitted soakers.
@clivefox5072
2 жыл бұрын
@@tk2097 that is correct, but they would have been used for many years with zinc, tin or even alloy soakers, or serect gutters. You also have to consider, pitch of roof, exposure and run of water above this point, why they may have used a cover flashing. It will also slow down driving rain reaching the soaker area, prolonging life if correct width cover is achieved. On minimum pitch roofs without cover flashing, the soaker can collect dirt, moss etc and block in time. Most soakers are code 3, without cover flashing they will last 30 years+, with a cover flashing, fitted correctly when brought down to meet bottom of front apron, 75mm return at front and clipped, will last a lifetime, specially in code 5.
@slbleadworks
2 жыл бұрын
Thank you
@adambradley8645
2 жыл бұрын
Lovely work as always Stuart 🙂 I've messaged you on Instagram 👍
Пікірлер: 103