If anyone doesn't like this video that this gentleman provided, I look forward to your attempt at doing one. Oh the silence is deafening.
@warriorsofwarmth
4 жыл бұрын
Sh Br manu thanks for ur comment, I work long hours, have a family and not the greatest with IT, merry Xmas
@sperry2817
7 жыл бұрын
Thanks for this video mate. I have just served a 5 year apprenticeship gaining nvq 2 & 3 plumbing + wras and unvented and gas, the latter being where i have gained the least experience. Altough im aware and concious of gas principles, im still not confident, generally, with my gas. Your series of videos are massively helpful to me and helping me fill in any gaps & uncertainties with gas protocol. Keep up the good work. Thankyou!
@kirksalter
5 жыл бұрын
S Perry do not listen to any advise here it’s wrong and you will finish your trade before it starts if you look at any manufacturer installation manual you will see ALL the correct methods for servicing correctly and more importantly safely
@rayc1503
6 жыл бұрын
Top guy it's catch 50/50 should you, shouldn't you? There's always going to be haters. There may also be fools opening up their boilers. Trying to save themselves a few bob. Wish there tutorials like this when I was doing my acs. I'd like to see some videos uploaded on fault finding using a multimeter. Your explanations are both logical & clear. Keep up the good work buddy.
@warriorsofwarmth
10 жыл бұрын
yes I am getting alot of requests regarding multi-meters and fault finding over the next two weeks I shall be up loading enough advice and footage to aid you, covering combination boilers and unvented hot water
@catherineahonsi4989
4 жыл бұрын
Jonathan i enjoyed watching your video.Ver educational ,thorough and staraight to the point.You are an excellent, caring and responsible teacher.Well done and continue with the videos.I wish you were based in London.Would like to work or train with you.Regards.
@warriorsofwarmth
4 жыл бұрын
catherine ahonsi I do sometimes pass London, Jonathon Hallam I’m on FB & Twitter if u ever need help 🤩😇🤗
@54FEER
4 жыл бұрын
Hi I saw your videos and I really enjoyed it keep up the good work. I have a Main Eco 30 Combi boiler I was fitted about 7 years ago, the whole pipe work is new and radiators. There is one thing that annoys me on my boiler is that when ever is ignites it makes a small tiny explosive noise you can hear it from far 😫 I have so far replaced the electrodes since it was old and bent (it was working but I wanted to avoid it failing), the heat exchanger was hoovered and the seal was replaced, the diverter valve and actuator was replaced (since a small leak damaged it). I have regularly flashed the water out using the drain point and running the boiler and keeping an eye on the pressure (the water is never too dark and flush it until it is clear water, I added some inhabitors, clean the filter out and took the air out of the rads, it is well balanced too. I had to pressurise the extension vessel which is good now, on the same time I took the prv out and cleaned it very little dirt on it it’s working good, I also cleaned out the part in which condensation and other dirt accumulate. There is one thing that annoys me on my boiler is that when ever is ignites it makes a small tiny explosive noise you can hear it from far 😫, you could describe it like a small delayed ignition 🤷🏽♂️ What would you recommend to check?
@warriorsofwarmth
4 жыл бұрын
Safeer Abdul Hamid check the electrode spark gap? Then check gas valve
@54FEER
4 жыл бұрын
Jay #happytohelp #warriorsofwarmth Plumbing The Electrodes have about just over a pound coin gape, is that good enough? When you say check the gas valve you mean is it’s set to the correct pressure?
@TheIcebon
5 жыл бұрын
That Burner should be coming out on a service...
@Lee-ss5ms
7 жыл бұрын
Only just come a cross your youtube clips very helpful
@warriorsofwarmth
7 жыл бұрын
The reason why I mention writing it proves you have taken the appliance apart to write on that place of the fire/boiler i.e. Closure plate especially to cover yourself and yes service stickers are awesome
@mimo1dz38
6 жыл бұрын
rear to see like this class guys i wish if i can give you 100 thums. nice one mate
@MrBarrytommy
5 жыл бұрын
Looks like you do much more than British gas do which varies from quite basic ,the service should be about 30 mins., depends if a new guy or a time served years of experience shows up, tends to mainly be on their laptops/mobiles and to each other
@leebuchanan8194
4 жыл бұрын
It's a "health check" rather than service with bg
@AllenHart999
6 жыл бұрын
Another great video.
@jesskundi1
7 жыл бұрын
fantastic video. thank you. just started my Bqec course and this clear .
@warriorsofwarmth
7 жыл бұрын
Jess Kundi always here to help
@ysnapzakazeeron
7 жыл бұрын
Liking the video mate, nice one!
@blackafrcahood
10 жыл бұрын
thanks man. really good job
@wrenlfc
5 жыл бұрын
This is whats wrong with KZitem showing people how to do things.... no wonder some customers are trying to do gas work without even being a plumber or gas engineer!
@Bbcvgfffc
5 жыл бұрын
Good video Made it easy to understand 😊
@peter-wz3ct
6 жыл бұрын
must be a good engineer he has used his hover
@stuartsinclair6269
6 жыл бұрын
Hi Jonathan, love all your videos. I'm using as a refresher. All bang on. Im trying to break into the boiler servicing/repair world, been trying since December. Still no joy, know one will give me the time. Im getting the boiler servicing experience, from your videos. I did see a boiler parts stripe down, from an ideal rep, which lasted 6hrs. Ive got my level 3 C&G/Diploma inc ASC.Will watching your videos be enough, to go self employed???? Any suggestions Jonathan. Thanks.
@warriorsofwarmth
6 жыл бұрын
Stuart Sinclair get yourself on boiler manufacturers training courses
@mrbachittarsingh9243
6 жыл бұрын
Self employed from watching KZitem vids? I think you need to reassess your expectations. Try and get a paye job to gain experience, you will know nothing about boilers and systems until you start regularly working on them you won't get that exposure being self employed and wet behind the ears
@stuartsinclair6269
6 жыл бұрын
Hi Bob, I’ve found things have slightly changed in the Gas world, very confusing and not helpful. I tried so many companies, and friends of friends. Everyone said no, they had no time, and no money for a new gofer trainee, job interviews, said no, maybe of my age, so I decided abit of KZitem, Various Courses, which I’ve completed a few now on boiler fault finding and wiring and controls and wiring up thermostats. Before I knew nothing. I managed to wire up 3 different boilers with no faults, its all in the diagrams and follow the numbers. It took a while, then it clicked. Very much enjoyed it. On to the next👍
@davelaye7003
7 жыл бұрын
mate, get some service stickers rather than writing on the boiler
@drewstylesplumbingheating7359
4 жыл бұрын
I like the idea behind this but I’m not sure it’s a good idea to show people how to service a boiler themselves 🤷🏻♂️
@warriorsofwarmth
4 жыл бұрын
Drew Styles Plumbing & Heating hi ya Buddy, this was done when I was lecturing gas for apprentices and working in FE, to help in their experience and assessments, I do agree with what ur saying, hope ur well, (Happy birthday 🍰)
@stuartsinclair6269
6 жыл бұрын
How strange, I have a cousin from Bingham, and looks like you. Brett Sinclair, if you know him, always doing gigs in pubs.Anyway, I want to eventually go Self Employed, Gas Trained. Excellent videos mate. I wasn't told, or seen until today, that an Assignment has to be done just before you go solo when fully registered. Does this rule apply today still. I'm still new to the industry. Thanks.
@warriorsofwarmth
6 жыл бұрын
Thanks always here should u need advice
@jayqaiomi3349
7 жыл бұрын
Hi Jonathan it's Jay , you were my teacher at New Stamford College, Top Man ☺
@warriorsofwarmth
7 жыл бұрын
Jay Qaiomi how are you buddy are u still plumbing?
@jayqaiomi3349
7 жыл бұрын
J.Hallam Plumbing since I completed my Level 3 plumbing I moved on to look for employers, but unfortunately at that time I couldn't find anyone to take me as an apprentice. I moved on to do something else for a while. I got into a course to do engineering as a Trackman . completed the 6 months course got a job after a month worked there for two years got qualified as an engineer at level 2 in the railway industry. this year I started working with someone as an apprentice and hopping to get my NVQ level 2 from the college so I only have to complete the portfolio and get signed by the employer and the college.
@warriorsofwarmth
7 жыл бұрын
Jay Qaiomi are u on twitter? Get on and add me? Let's put a call out !
@jayqaiomi3349
7 жыл бұрын
J.Hallam Plumbing I added you on FB
@jayqaiomi3349
7 жыл бұрын
J.Hallam Plumbing this is my FB page my number is there , drop me your number please as I will be in touch as I need to ask you something about the gas course... m.facebook.com/jayplumbing/?ref=bookmarks
@michaeldouglas5072
6 жыл бұрын
If you was cleaning this out (typically I would judge this with a FGA ) surely you would remove the flue hood, fan and burner also?
@mrbachittarsingh9243
6 жыл бұрын
Michael Douglas you need to change the pcb
@monitor4728
7 жыл бұрын
Thanks for the upload very helpful 👍🏻
@blackafrcahood
10 жыл бұрын
can you do something on multimeters and boilers?
@joncocks2262
5 жыл бұрын
Thanks now I'm dead.
@martynlewis4344
5 жыл бұрын
The 105e & 105 HE always get a heavy build up of oxidisation in that front right hand corner on the heat exchanger. Have never figured out why?
@magandapanget569
6 жыл бұрын
I thought that if you have no other appliances just the boiler then you are not allowed any drop from a tightness test?
@YagiChanDan
10 жыл бұрын
What are CO2 stains?
@eltonchitongo3757
5 жыл бұрын
Hahaha water 💦 stain
@jamboSAFC
6 жыл бұрын
Hope you checked that vertical flue was clamped 😉
@warriorsofwarmth
6 жыл бұрын
jamboSAFC great point
@paulkramer2599
6 жыл бұрын
Did I hear you say "Operate the PRV for 30 seconds" ??..........OMG!!!!!.......I know strictly speaking you should do this but Really ???? LOL
@warriorsofwarmth
6 жыл бұрын
Paul Kramer I am going by the rule of thumb for learners, on some appliances for can’t even reach the PRV
@Uber-GT
5 жыл бұрын
Yes and you are causing yourself a problem because when you mess with a prv there is a high probability it will not seal again. Leave well alone
@Cogibear
7 жыл бұрын
What did you use to clean the heat ex? Most MI's say not to use a wire brush so Im wondering what you use?
@warriorsofwarmth
7 жыл бұрын
Cogibear hi ya buddy modern stainless steel use vinager aluminium use hot water, old school brush or vacuum
@mrbachittarsingh9243
6 жыл бұрын
Cogibear you can also urinate in them, the Uric acid cleans em up a treat
@pissinthetrousers3420
7 жыл бұрын
top man
@bilalozturk8415
6 жыл бұрын
Would you be interested in repairs for the combi card
@warriorsofwarmth
6 жыл бұрын
Bilal Ozturk please tell me more?
@abdelkaderaraba7328
7 жыл бұрын
please error A01 in beretta mynute 28 caie
@timmclean-inglis9371
4 жыл бұрын
Please pop it in a skip
@ArksE8
7 жыл бұрын
why are you even showing this video. You'll get non gas safe guys breaching the regs. plus you're killing the trade
@warriorsofwarmth
7 жыл бұрын
Arks Ekrem sorry if it caused you stress I uploaded to aid people, D.I.Ys wouldn't buy a flue analyser? Surely not?
@ArksE8
7 жыл бұрын
+J.Hallam Plumbing No but they'll start removing boiler cases and go and buy a u-gage. you're just opening a door for them. I understand you want to help people but making a public video for everyone is wrong in opinion. No stress caused mate. just disagree with it.
@Lasagna564
6 жыл бұрын
J HALLAM..your scared it will put you guys out of a job
@normanboyes4983
5 жыл бұрын
Arks Ekrem Not all DIY people are equal - just like not all ‘Gas Safe Engineers’ do competent work.
@normanboyes4983
3 жыл бұрын
Cowboy ‘Gas Safe’ engineers are doing a better job of ‘killing the trade’. See some of Allen Harts videos. Plenty of work for good Gas Safe engineers sorting out the shit installs done by the cowboy gas safe engineers.
@frankbennett8877
6 жыл бұрын
I think you mean to say 2k resistance NOT twos thousand K. (There is a big difference) Young apprentices will get confused with this. Jonathon I like you're videos and the charity work you do but please get it correct.
@warriorsofwarmth
6 жыл бұрын
Frank Bennett thanks for ur kind words unfortunately I am partially deaf and either shout or get my words mixed up x
@kirksalter
5 жыл бұрын
Well where do I start firstly I’d riddor you for putting back into service a gas burning appliance which clearly had a damaged back pad ,what’s worse is you saw it and still ignored it ,I reckon you covered about 5% of the manufactures instructions in relation to service ,you have made so many fundamental simple faults you really shouldn’t be giving service advise to joe public,especially when the info is week at best ,the mind boggles really if I’d have paid you £150 to service my boiler and that was the video of my service I’d be asking for my money back,you started by saying you were professional and ended by saying you lecture? Where do you lecture I’d love to sit in and see what your telling people .I could if I wished sit here and tell you about all the points you didn’t do but instead I’m going to plead with you to learn your trade ,I’m going to guess your new to the gas industry so I’m not going to embarrass you please please please stop,delete any videos before someone uses your information,kills themselves or worse some one else as it will be all your fault
@timmclean-inglis9371
4 жыл бұрын
Just who is this video for ?teaching granny to suckling eggs
@richardadams9017
5 жыл бұрын
As a experienced gas engineer it seems you are trying to explain to non gas engineer how to service there own boiler.
@warriorsofwarmth
5 жыл бұрын
Richard Adams apologise if it seems like that it’s more for trade entrants studying
@Hitngan
6 жыл бұрын
To be classed as an engineer you need a Degree in your field of engineering i.e. BEngHons.
@mrbachittarsingh9243
6 жыл бұрын
Robert Kitchen agreed, technician is more appropriate
@Hitngan
6 жыл бұрын
bob bob I'm a Civil Engineer which used to rank high as a good profession, but now every Tom Dick and Harry Technician are calling themselves Engineers which is having a negative effect on properly qualified Engineers
Пікірлер: 82