Hi , it was one of your best tutorial video , it was complete and awesome and informative video . keep it up . thnx
@manosgouzibas8045
3 жыл бұрын
I am amazed about all these details in this video.
@NSC-Modz
3 жыл бұрын
Thank you so much, you always welcome.
@electronicrepairservice1705
Жыл бұрын
Not sure if I misunderstood something but at 19:37 you show the IC with pin 1 (dot on IC) soldered to the location marked "5" on the test board. It looks like the IC is mounted backwards or are the markings incorrect on the test board? Shouldn't the dot be where the "1" is on the test board?
@NSC-Modz
Жыл бұрын
It's like that, i turned the small PCB to an other side, that's why it worked. You can connect the PCB in deferent ways to the programmer. But if you have connect the PCB to the other side, than you will need to turn also the Chip. In this case it doesn't matter as long both things is connected right to the programmer. I was more focused on the video it self. People's like me just don't care about because we already did it thousand times 🙈 But maybe i do again a video about the right way to connect all. Because this small thing really confuses some people's like i see 😅
@simonlim911
Жыл бұрын
I agreed with you that the dot on the Bios is marked pin 1, the test board already shown the correct orientation. You should solder the SOP8 IC chip marked with the dot to where the '1' is on the test board, rotate the PCB so the IC chip is on the right hand side in contrast to the video showing that it is on the left hand side. Take a pain marker or liquid paper to make a marking for pin 1 on the holder so that in future you'll know where/how the test board should be correctly mounted. In experience people should always use a multimeter to check all pins-out with the CH341A layout/schematic diagram if they are in doubts, do not try to flash any Bios with a programmer without knowing the proper mounting.
@gio0042
Жыл бұрын
Just bricked an old P5KPL-AM EPU because of a power outage during bios update (very lucky), it was supposed to have CrashFree bios 3 but it won't work. I ordered this cheap programmer so i hope i can repair it. I also have to borrow a pc from a friend which probably will be running on windows 10/11, so i hope there won't be problems. Also respect for still using windows 7 (which i still use too) because it's the last serious OS from microsoft
@NSC-Modz
Жыл бұрын
Yes, Win7 is the best OS to work with stuff like that! To avoid errors, go always for Win7! Otherwise click on the tool with right mouse, properties, than compatibility mode and select Win7 also run as Adnin and save it for best results :)
@gio0042
Жыл бұрын
@@NSC-Modz hey bro, i just received the programmer and out of curiosity i tried it on my android phone (galaxy s9) with an usb adapter and it works... I managed to reprogram the chip without using another pc. The app is called Combo Tool Plus, i suggest you make a video about it if you want to because i found very little to no info on youtube about this app, cheers
@NSC-Modz
Жыл бұрын
@@gio0042 Nice one, very good to know :)
@浦島太郎-w5y
9 ай бұрын
Great!! Thanks for sharing!! I'm going to mofify a BIOS on my older Lenovo laptop PC. Because of the white list, it does not accept a new wifi card.. So, I have to remove the white list. This video is very very useful!!
@NSC-Modz
9 ай бұрын
You always welcome
@ruggierocapuano5575
3 жыл бұрын
16:40 "Italiano!" HAHAHAHAHAHA greetings from Italy 🍕
@NSC-Modz
3 жыл бұрын
5 mile Grazie 😉
@Martin-ot7xj
2 жыл бұрын
Hi there , it was very useful and informative tutorial video . keep it up . thnx
@PBRsa
3 жыл бұрын
Again, very well explained. 👍🏼👍🏼👍🏼👍🏼
@rumjar1986
Жыл бұрын
I am stuck, I have a boyamicro 25q128 spi chip that i cant find a tool that has support for it, it was from a busted creality wifi box that just doesn't seem to boot at all. I have the stock images for the board but just cant seem to get it to work.
@NSC-Modz
Жыл бұрын
It's because this chips are blocked for some reason or the chip it self is damaged. I had same problem on a phone station, i wanted to clone the station because i had a second phone but the second station was brocken. I was able to read the chip, but after it was finish, i saw the file was like impossible to flash. Some manufacturers block that stuff to protect them self, copy rights and hack protection...
@razblack
3 жыл бұрын
I have this, works fine in Linux too. I've had some troubles with the drivers in Windows 10, maybe i will double check that jumper. I just was curious to know if you have tried to use this to flash OpenWRT on anything?
@NSC-Modz
3 жыл бұрын
Hello No, to be serious, i don't know what you mean with OpenWRT. Please explain that for me ;)
@4N5W3R5
3 жыл бұрын
20:03 Good video so far except... that symbol is pin 1.... you have it turned around... the "Symbol" on the chip is "Always Pin 1" if you remember that you should be good. If you take a look at the traces on the bottom of the board ( pin 1, 2 and 3 go to the chip pads on the bottom of the board pin 4 uses the top) you can see the hole with the square symbol on pin 1 leads to pin 1 on the pads to solder down the chip. Hope that helps a little ;)
@NSC-Modz
3 жыл бұрын
Yeah i know, all cool, it conforms how you turn the pcb and stuff 😀
@FixedUntilBroken
3 жыл бұрын
At the price I forgive it but it really needs USB isolation and and some resistors on the data/ power output pins. I use it on automotive applications so I normally use a soic8 clip/pogo pin setup. welI accidently let the magic smoke out of one the the other day. a resistor array on the board probably would have saved it.
@Martin-ot7xj
2 жыл бұрын
Hi there , please make a tutorial video about how to reprogram (Startup or Super I/O) chip on laptop motherboard , as you know that if we get problem with (Startup or Super I/O) we must to change it with exactly same chip and same program !!! so please make a tutorial video about how to program a blank (Startup or Super I/O) in English , because your explanation is very simple and easy to understand . thnx
@michaelwong2772
Жыл бұрын
Hello, I would like to use this bios programmer to reflash my bios that is supected to be infected. Do you know if this programmer itself has malware and does reflashing bios clean the malware implanted?
@NSC-Modz
Жыл бұрын
No, it has not. But you sure the Bios is infected??? It would be enough to reflash the chip, just erase the chip before flashing new one.
@MrRolandRT
4 ай бұрын
Ich glaube du hast die Platine falsch aufgesteckt. Die Markierung ist Pin 1, dann ist der Chip auch falsch aufgelötet. Gibt das das Video auch auf Deutsch? Hast dir viel Mühe gemacht ❤
@NSC-Modz
4 ай бұрын
Es ist so, wenn du weißt was du tust, kannst du es drehen und wenden wie du magst, das Ergebnis bleibt gleich :)
@commonlawsouthafrica
2 жыл бұрын
greetings, thank you for all your efforts, praise youtube for DIY tutorials, one question, regarding programming bios chips on laptop motherboards, should the CMOS battery be removed BEFORE programming, i.e. programming without CMOS battery in place, or does one need to remove the CMOS battery after successful programming, then wait a certain period and insert/connect again ? i read conflicting feedback on the topic, same for unplugging the AC or not; on an old lenovo G560, the CH341 didn't pick up anything from the BIOS chip (i don't have USB 3 quick charge outlets on the other PC btw) until i connected the AC power, thank you and keep up the good work
@NSC-Modz
Жыл бұрын
Just saw this comment right now... it's recommended to take of the bios chip, sure is sure but not a must like you see...
@martingv9977
3 жыл бұрын
Great video! Well explained.
@NSC-Modz
3 жыл бұрын
Thank you very much ;)
@andrewdotson6536
3 жыл бұрын
Hello Sir!! Amazing video!! Can you please explain how to change hidden settings to visible? I have an Alienware r12, and dell locked the memory controller to gear 1:2 with no way of changing it in bios. I’ve heard that the option is in bios but it has been disabled and hidden. Thank you so much for your videos!!!!!’
Is the programer ready out of the box for 93 eprom?
@d0nKsTaH
3 жыл бұрын
I need to know if this will work on an ASUS M2a-VM HDMI motherboard's Bios. The Bios looks like a 30 pin chip... any idea if this could be done? or do I need a different bios programmer? The chip is soldered to the board btw
@NSC-Modz
3 жыл бұрын
Should work, but in most case you need to get off the bios chip.
@valdeera
Жыл бұрын
Hi there. I have one of these usb chip programmers. Im trying to connect to a eeprom chim from a gauge cluster. Its a RH86 type, small 8 pin chip. What type is it, I'm having no luck connecting. Thanks.
@emir4707
3 жыл бұрын
my black ch341a not detect by programing tool but windows show in device manager ch341a on com4
@wilfriedwolf9829
2 жыл бұрын
Ein sehr gutes Video, hat mir viele Fragen beantwortet. Eine Frage habe ich dennoch, die ich hier stellen möchte. Ich möchte an meinem Board einen Winbond 25Q128BVFG mit 16 Pins programmieren. Das passende Adapterrkabel mit SOP / SOIC 16 Test Clip habe ich mir auch angeschafft. Kann ich das Kabel an dem CH341A anschließen und damit das BIOS neu flashen? Wie muss die Verbindung am CH341A aussehen? Danke vorab und alles Gute.
@bossmanfox3507
Жыл бұрын
Great video. Can the EC chip be program through the bios chip.
@NSC-Modz
Жыл бұрын
Thank you very much. I just don't understand your question....
@Martin-ot7xj
2 жыл бұрын
Hi there , on Asus or MSI website for bios they have .CAB file how to convert them to BIN or Hex File ??because ch341a program only support Bin or Hex file!!! ?? thankyou
@lewisnjovu7957
8 ай бұрын
i want one how did you order it
@johnjohnston1566
Жыл бұрын
Very,very interesting and useful advices. Thanks!
@NSC-Modz
Жыл бұрын
Thank you so much, you always welcome
@sureshlingabathina
2 жыл бұрын
Unable to download software from the link given by you.
@NSC-Modz
2 жыл бұрын
Will check it soon again
@aliissa8347
2 жыл бұрын
Thanks for the sharing. I have 2 questions 1. My bios chip is Mx25L12873, can I replace it by another mx25 bios chip or w25Q? 2. I've tried to flash my bios chip using the ch341a and the test clip but after that my laptop don't power on and the charging led is blinking white and orange. Could you please help? Many thanks to all
@bilalahnani5832
3 жыл бұрын
Thank you 😊😊💖💖
@NSC-Modz
3 жыл бұрын
You welcome ;)
@ucheernest6059
2 жыл бұрын
Hello NSc, Please what are the possible faults that someone can experience with / in a computers when the EEPROM chip is bad or corrupt. kindly use you age-long programming expertise to analysis this please. Thanks for being so much helpful to little guys like me with your highly educative Videos. You can also reach me through my e-mail if need be. Thanks again, and remain blessed.
@NSC-Modz
2 жыл бұрын
Hello I just try my best ;) What is your exactly problem and with witch system?
@ucheernest6059
2 жыл бұрын
@@NSC-Modz Thanks for responding to my question. What I mean is this, what are the faulty behaviors that could show that a computer Motherboard has Bad or corrupt EEPROM chip. Thank you
@NSC-Modz
2 жыл бұрын
@@ucheernest6059 Computer will not work like it should, sometimes it will freeze on startup, or in Windows you gonna have strange issues like bluescreens or some aplications freeze. A bad bios or bischip will cause a lot strange problems, but this sometimes is happen also if you have set your bios wrong, or if the ram is runing bad also. The Bios is most important for a Stable system. It´s just like the brain from your PC :)
@juanfelipecopete9368
3 жыл бұрын
You're a MASTER
@NSC-Modz
3 жыл бұрын
I just try my best 🤗
@HueMongussD
3 жыл бұрын
will this flash a bios from an old 386 Motherboard?
@ep_dimi
3 жыл бұрын
thank you for the video! is it possible to flash the bios while it's onboard?and if yes how it can be done? i have bios mx-12g 25l1605dm2iand it works with 3.3V. The programmer use 5V at the data pins. Did you make any modifications?
@ep_dimi
3 жыл бұрын
i just saw your video "USB Bios Chip Programmer CH341A (Black Edition) Chip not Detected -fixed- By:NSC" where you recommend to avoid connecting the programmer onboard. When i connected it onboard it didn't recognise the bios. Only once it succeed to read data without recognizing the bios chip. I'll try to desolder it and try again. About the Voltage.. do i have to change the jumper position to use 3.3V?
@kabandajamilu9036
3 жыл бұрын
So nice
@ImperrfectStranger
3 жыл бұрын
Thanks for the video. Do you know what might cause the DETECT button not to appear? I couldn't find my EEPROM listed in the chip search.
@ep1cccc
3 жыл бұрын
Detect button is only on 25spi
@ImperrfectStranger
3 жыл бұрын
@@ep1cccc Actually, it was very much user error. I didn't have one of the legs on the chip soldered properly. After I resoldered it, I accidentally put the adaptor in the wrong way around and fried the chip. Handed the job over to the experts... $600 dollars later...
@ep1cccc
3 жыл бұрын
@@ImperrfectStranger rip
@gener-all5177
3 жыл бұрын
Hi bro, first let me tell thank you for a very good job. I try the first link but the account of mega was removed.
@NSC-Modz
3 жыл бұрын
Thank you very much, im gonna fix that in few secs. ;)
@NSC-Modz
3 жыл бұрын
Here you go: onedrive.live.com/?id=BEB708D783520133%21203&cid=BEB708D783520133
@gener-all5177
3 жыл бұрын
@@NSC-Modz thanks a lot. Best regards from Venezuela
@josephsagotti8786
3 жыл бұрын
Programming a winbound bios, the software isn't showing a "detect" button. Any help?
@NSC-Modz
3 жыл бұрын
It's because you have select EEPROM Select the Chip Type "25 SPI FLASH"
@aventurandonaeuropa7768
3 жыл бұрын
Very good
@NSC-Modz
3 жыл бұрын
You always welcome ;)
@abdallahharfoush9449
Жыл бұрын
I dont know how to thank u brooooo....
@NSC-Modz
Жыл бұрын
You can just subscribe to my channel, that would be very nice 🤗
@abdallahharfoush9449
Жыл бұрын
@@NSC-Modz offxourse i have a question from where can i get new bios to write it on the chip
@NSC-Modz
Жыл бұрын
Mostly on the website from the manufacturer. Go there and search your model than go to drivers and look for bios updates. Or just buy a bios chip on the Internet
@abdallahharfoush9449
Жыл бұрын
@@NSC-Modz i meant if i want to write new bios on the bios chip not bios update from the website
@NSC-Modz
Жыл бұрын
@@abdallahharfoush9449 yes, but you need the bios file, and you just get it mostly on the website. Otherwise try to Google where to find it. Which model is it?
@N88EGN
3 жыл бұрын
Do you offer a bios flashing service?
@hyundaiioniqkianiromainten3319
Жыл бұрын
hi, im getting error for download, failed: any idea? thx
@NSC-Modz
Жыл бұрын
Maybe i have take of the download
@hyundaiioniqkianiromainten3319
Жыл бұрын
i can try again, is it possible to get working?thx
@NSC-Modz
Жыл бұрын
@@hyundaiioniqkianiromainten3319 pls try it here: kzitem.info/news/bejne/loSPy2Znp3iEd34
@belabedokacha7210
3 жыл бұрын
Thank you bro, can she program the OTP area or not
@NSC-Modz
3 жыл бұрын
good question, but it conforms your bios file. older bios files are open, newer bios files are mostly blocked.
@4etoilesproductions
3 жыл бұрын
Hi, I have a lenovo miix 320 laptop. And it has a password in the bios. I would like to unlock it. My question is can I bypass it by just discharging the bios chip?
@NSC-Modz
3 жыл бұрын
Hello Yes, but you will need to flash a new Bios back again.
@patrickernieta5347
3 жыл бұрын
Its compatible software in window 8.1
@4etoilesproductions
2 жыл бұрын
Hi, How can I find unlocked bios bin for HP 255 G5 ?
@NSC-Modz
2 жыл бұрын
Use the bios Unlocker
@4etoilesproductions
2 жыл бұрын
Any link for where I can download it? Have you made a video about it?
@llucioo
3 жыл бұрын
Hi, I'm getting a "file too large for IC" error, but the bios is the correct one from the manifacturer. Also it seems my exact chip is not on the list mine is a GD25B64CSIG, but it detects a GD25Q64. What should I do?
@Mohammed-de9sq
9 ай бұрын
There are 2 seperate bios chips
@Mohammed-de9sq
9 ай бұрын
on your motherboard
@llucioo
9 ай бұрын
@@Mohammed-de9sq in the end i found out that a faulty usb c drive shorted the 5v line onto the 3v, the motherboard was irrecuperable. surprisingly the BIOS chip was working fine tho XD. Your video was very helpful anyway😄
@NSC-Modz
9 ай бұрын
@llucioo xD Good luck bro.
@Yilon1
Жыл бұрын
Tolles Video , aber kannst du auch Mal in deutsch machen?
@NSC-Modz
Жыл бұрын
Könnte ich machen ^^
@luigiprovencher
Жыл бұрын
Can these be used with a raspberry pi?
@NSC-Modz
Жыл бұрын
It conforms the chips it has
@luigiprovencher
Жыл бұрын
@@NSC-Modz What?
@beogeek
3 жыл бұрын
Great video but none of your links work! "This item might not exist or is no longer available" Mind uploading them again?
@NSC-Modz
3 жыл бұрын
I'll put it online soon again
@beogeek
3 жыл бұрын
@@NSC-Modz Bloody legend!
@NSC-Modz
3 жыл бұрын
@@beogeek Here you go: 1drv.ms/u/s!ADMBUoPXCLe-iRM
@beogeek
3 жыл бұрын
@@NSC-Modz OOOOH YOU BLOODY LEGEND! GOOD ON YA, GOT IT!
@beogeek
3 жыл бұрын
@@NSC-Modz HAHAHAH Love the folder structure, very original and very 1998!
@solallasano3696
3 жыл бұрын
Nice Work NSC
@NSC-Modz
3 жыл бұрын
Thank you so much.
@patrickernieta5347
3 жыл бұрын
Can you send software link sir
@MahdiHedayatii
3 жыл бұрын
hi bro i see someone programed io ic kb90** can you explin and show us how tnx
@NSC-Modz
3 жыл бұрын
Hi It's mostly the same just with other adapters.
@beardedgaming1337
2 жыл бұрын
can someone link the software? i cant find it for the life of me. the download links on one drive fail to download. ive found russian, chineese, some arabic but no english versions
@NSC-Modz
2 жыл бұрын
Try this pls: onedrive.live.com/?authkey=%21ANIto2XzwyBMa9o&id=BEB708D783520133%21203&cid=BEB708D783520133
@beardedgaming1337
2 жыл бұрын
@@NSC-Modz download works, i can read teh chip now. omg it fucking works... ive been screwing with this for 2 hours now trying to find the right software.... i have 16 versions of this flash tool on my computer but your link worked! i just flashed a 128KB rom and verified it! success! fucking thank you! i can now get my PC Radeon 7000 working in my Macintosh Performa 6360CD and go play Warcraft III and Escape Velocity!
@NSC-Modz
2 жыл бұрын
@@beardedgaming1337 you always welcome 😀 don't forget to subscribe 😀
@beardedgaming1337
2 жыл бұрын
@@NSC-Modz I certainly will
@NSC-Modz
2 жыл бұрын
@@beardedgaming1337 thank you so much 😉
@PIDOtomasyon
2 ай бұрын
File password please. thank you
@billkillernic
4 ай бұрын
Everything is in schinees for me 🤣
@Rayyy
3 жыл бұрын
Whens the next ps3 vid ?
@NSC-Modz
3 жыл бұрын
I think soon, i got an update for Evilnat 4.87 witch was fixed :)
@michaelboss7968
Жыл бұрын
seriously
@NSC-Modz
Жыл бұрын
What's wrong?
@muhammadrayanmansoor4301
3 жыл бұрын
You really are a master of what you do.....Great explaination
@claudiosoaresdecastr
3 жыл бұрын
Estou do Brasil e queria te agradecer, em minha língua, para você perceber o poder que ajudar os outros tem. Muito obrigado. =)
@NSC-Modz
3 жыл бұрын
Ai que bem, muito obrigado, eu sempre gostei de ajudar ;) Muito Obrigado outra vez 😉
@shadwxero
3 жыл бұрын
Hi NSC, been following since 2010 and damn your channel has been one of the best, every time I've had questions you would release a video illustrating the resolution before even voicing my question lol, keep it up! and thanks, then and now!!!!
@NSC-Modz
3 жыл бұрын
Thank you so much, you very welcome ;)
@Martin-ot7xj
2 жыл бұрын
Hi , your tutorial video is one of the best tutorial i have seen ever ., wowow , It was very complete and easy to understand , informative and your explanation was perfect . keep it up . thnx
@NSC-Modz
2 жыл бұрын
Thank you very much
@tharcisseilunga6658
5 ай бұрын
Big thanck
@NSC-Modz
5 ай бұрын
You welcome :)
@Erkanalpalp
3 жыл бұрын
hi, at first thank you for this video and i have a problem. my tablet has mxic mx25u6435f bios and i tried the change boot logo and it died. now i find a dump from a friend. i can auto detect my chip. Erase-> blank check-> write -> and i have a error on verify in different values. I have black one and 1.8v adapter. desolder chip. asprogrammer, neoprogrammer, and ch341 programmer and i always get error. what is my mistake?
@NSC-Modz
3 жыл бұрын
Hello You always welcome! Its maybe not your mistake, maybe the Biosfile is blocked, so it will be hard for you and you need to do some more stuff by your self... Maybe a new Chip will help with your problem
@lavazakoffee7373
2 ай бұрын
Hello.Do you know is it possible to read/write eeprom 25LC256 ESN
@roswithadusa8673
3 жыл бұрын
hallo gutes lehrreiches video ,verstehe aber nicht timeline 1:23:58,hast du den bios chip über hp tool geflasht und dann ausgebaut um ihn zu lesen?
@NSC-Modz
3 жыл бұрын
Richtig, erst über HP Tool geflasht, dann chip ausgelötet um die BIOS Datei dann zu klauen 😁
@vertigo6982
Жыл бұрын
I hope I’m wrong about this and I may be being that somehow a batch of programmers were released into the market with inverted markings under the board, but I doubt that. This is all wrong according to my boards. 19:32 you can see clear as day pin 4 track to the bottom right pin opposite of the dot marked pin (“pin 1”) which is now running to your chips pin 8 (“Vcc”). Also the boards pin hole 8 track is clearly visible and running to the chips attach point’s pin 8. Your chip is rotated 180 degrees in the wrong direction. Marked pin on the chip using a dot is pin 1, not 5. I didn’t finish watching the video but you’re supplying voltage to your chips GND pin if it’s similar to my Bios soic 8 chip. Pin 1 is CS (“Chip Select”), 4 - Ground, 5-SI/SiO, 8-Vcc. So in this backwards configuration your supply Vcc pin 8 is wired to your chip’s ground pin 4. And your Supply Ground is wired to your chip’s Vcc. Not sure if this will even short anything out since it’s ground -> Vcc, and Vcc->Ground. 23:33. This is wrong. The programmer usb port should be facing down when attaching this board upright like this. Correct half of the programmers grill though. The other half of the programmers girl closest to the locking lever is for i2C. So at 23:33 this adapter board programmer sandwich looks awful and is wrong at every layer. Please excuse this comment if somehow your markings on your programmer were inverted but I’ve yet to see the underside of the board in the video to confirm this strange suspicion. Other than that this is an excellent video.
@NSC-Modz
Жыл бұрын
Hold on hold on... it conforms how the PCB is connected to the programmer. Read the video description for more info 😆
@vertigo6982
Жыл бұрын
@@NSC-ModzI just drew your pin out sandwich lol. By rotating the adapter the wrong way you then had the wrongly rotated pin in the correct position for programmer lmao. You’re either a jackass or the biggest KZitemr tech troll I’ve ever had the pleasure to encounter. If you’re the latter then bravo sir. You got us all with this premeditated organized mess. 😂
@Vidya1939
2 жыл бұрын
Long video, many tks for ur TIME
@NSC-Modz
2 жыл бұрын
You always welcome
@tersinemuhendis585
3 жыл бұрын
thanks my frend very well video merci :)
@NSC-Modz
3 жыл бұрын
You welcome ;)
@choboubengaly1302
3 жыл бұрын
Hy I have this problem on my MacBook pro how can I find this key USB please Mr I need help🙏🙏🙏
@pantsi
3 жыл бұрын
Hello what about hp bios files .exe it gives 4 .bin files if i choose to make a copy on this pc. which bios file i choose?
@mmmihai1384
Жыл бұрын
can you make a video of the differences between all ch341 programmers cuz there are more and i can find info only for ch341a and i hate that cuz i wanna learn how to use them all
@NSC-Modz
Жыл бұрын
Oh, there are a lot programmers... i don't want to buy them all just for the videos 😅
@mmmihai1384
Жыл бұрын
@@NSC-Modz its ok i will try to test them by my own
@mmmihai1384
Жыл бұрын
as much as i can and cheapest as i can so if something will happen again to my bios chip i can repair it very easy
@NSC-Modz
Жыл бұрын
Sure, but one programmer is enough for the most chips 😀
@arieettinger8175
9 ай бұрын
can you read the 93cxx eeproms with this ch341a mini programmers ??
@NSC-Modz
9 ай бұрын
Yes, You can read a lot chips, and there is also a lot software for this adapter :)
@arieettinger8175
8 ай бұрын
thanks for responding.i can read the 24 and the 25 chips but not the 93c.what needs to be done ?@@NSC-Modz
@arieettinger8175
8 ай бұрын
i know you can read a lot ,but can you read the 93cxx eeproms and if yes , how.@@NSC-Modz
@jeromenisen9242
Жыл бұрын
bonsoir, il est impossible pour moi de lire un eproom de calculateur moteur avec la pince et windos 10
@Phil-D83
Жыл бұрын
I had a old hp envy 700-0049 brick itself with a bios update. Can it be flashed on the board via the pins? Or do i need to pull the chip? Can it be socketed?
@NSC-Modz
Жыл бұрын
Yes, even if it works, it's always recommended to take the chip out for less problems while the flashing procedure.
@Phil-D83
Жыл бұрын
@@NSC-Modz what do i use to socket it? A dip type socket?
@NSC-Modz
Жыл бұрын
@@Phil-D83 there are a lot adapter's you can buy, just like here: www.amazon.de/Flash-Chip-USB-Programmierer-Flash-BIOS-Chip-USB-Programmiermodul-SB-Programmierer/dp/B08TVNPTQK/ref=asc_df_B08TVNPTQK/?tag=googshopde-21&linkCode=df0&hvadid=501097455353&hvpos=&hvnetw=g&hvrand=4570610245055788634&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9041899&hvtargid=pla-1211704320843&psc=1&th=1&psc=1
@Phil-D83
Жыл бұрын
@@NSC-Modz i have the ch341a, tl866ii plus,etc. Need something for the mothetboard itself. If it goes kaput again, cannjust pull the chip without soldering
@NoelitoMondaBayos
Жыл бұрын
maraming salamat po sa mga paliwanag mo and i learn more from you about CH431A thank you....
@NSC-Modz
Жыл бұрын
You always welcome 😉
@ilanbinkovitch6054
Жыл бұрын
You connected the IC, at 20:21, INCORRECTLY . HOW !! Pin#1 to Pin 1 . Clearly marked , and also the tracks. Considering that my 3 AV apps FLAGGED your Software exe file as RISKY , you wrote it yourself in that video - I'm afraid I don't trust you.
@NSC-Modz
Жыл бұрын
First: Hello... I really dont care if you trust me or not, first you need to ask me why and how it worked like that, just than you can say that you dont trust me. It´s NOT connected INCORRECTLY, would it be connected INCORRECTLY, than it would NOT WORK! So in first it looks INCORRECTLY, but the PCB was turned, that´s why it worked also, PCB was turned to the other side, thats why it worked, because the CHIP was soldered right! A lot people´s do this with Manuals and stuff, but if you understand how the PCB and the Chip is connected, than you can do it how you like. All roads lead to Rome, not only one...
@ilanbinkovitch6054
Жыл бұрын
@@NSC-Modz Yes. I realized that you rotated the PCB. Thing is , It is not according to the markings i.e They are correct ! and in accordance with usage logic. And if one inserts the PCB correct , than its a dead short ! Vcc to GND. Anyway, There is no marking that I saw , on the USB device itself , that show correct orientation to insert i.e Pin #1.
@NSC-Modz
Жыл бұрын
@@ilanbinkovitch6054 It doesent matter as long you know what you doing. If peoples dont know what they do, so they better DONT do it. But if you have something you dont really know, than PLEASE ASK first, before just saying that you dont trust me! Most peoples on my channel have subscribe because of TRUST! But it´s ok that you saw that, that means you was watching very focoused this video, so it´s good. Only thing it´s not good, when you say you dont trust me, just because of that small thing, which can be connected in a lot different ways. If this would not work, than the program would not be able to read the Chip, understand? Just for you know, i mostly dont even use the PCB, i mostly soldering the chip my self with Cables or other stuff, this PCB is just a help, but not really needed for proffesionals. Like i told, it was just turned, so thats why the chip was soldered like that. You can also connect it on the other side of the Programmer, so there you can soldering the chip directly to the programmer without this extra PCB. But whatever we talking here and wasting time, i just want to say you can trust me, and you are free to do it like you want, no need to do it like i did :) and when ever you need help or have some questions, you will be always welcome here 🤗
@NSC-Modz
Жыл бұрын
and by the way: some antivirus tools shows wrong stuff when there are exe. files in it, so this is nothing new. exe. files get mostly reported wrong on cheap antivirus tools.
@ilanbinkovitch6054
Жыл бұрын
@@NSC-Modz almost 20 yrs ago, I wanted to start an ATX PSU , Antec 380W in SONATA 1 Case. I found instructions online how to jumper the necessary Pins. I verified I'm doing it correct ! POOOF !!!!! I still remember the disbelief. I still think it was done on purpose. Your videos are informative, Deutsche Wert Video :) aber.. I learn a lot with the Internet and rarely, actually never get bad advice BUT I still remember the shock. Mach es gut & danke
@mahmoudhantouli5434
2 күн бұрын
Hi i I buy one of these CH341 and I try everything to make it work doesn't successful
@NSC-Modz
2 күн бұрын
@@mahmoudhantouli5434 please watch this video, and look where your jumper is: kzitem.info/news/bejne/loSPy2Znp3iEd34si=7fqVYTm3x7g5vaC_
Пікірлер: 197