i got an interesting comment on a video about the Victorinox multipurpose hook on my channel: "Also pulling zippers with broken pull tabs, and turning Leatherman bits if you leave your Leatherman at home." Greetings from Switzerland Felix
@maxlvledc
2 жыл бұрын
As usually...adding more incredible functionality to a vic 🤦. I give up the huntsman wins
@jaybaughn8090
2 жыл бұрын
I swear, I am the only one who uses my index finger to operate my scissors☺️
@aellipsis
Жыл бұрын
I have the same reaction to people who call scissors “a scissor” as I do fancy clothes people “a pant”.
@rickmaldoo4205
3 ай бұрын
I wear Shoe with pair of sock
@aellipsis
3 ай бұрын
@@rickmaldoo4205 I uses an scissor to cuts my pant so’s that my pair of sock would not be hidden when I put my pairs of shoe on. My pairs foots will not mind being hided, for no one of good consciences show free foot on internets
@goblinsarereal4954
7 ай бұрын
Just got a surge for Christmas thanks for the tips im a plumber and I've been using them constantly lol
@KlodianHysi
2 ай бұрын
Whats the brand on the normal scissors ?! I dig them .
@paul_miller43
Жыл бұрын
Good to know! I dont plan to buy a surge but things do change
@MustaLaatta
2 жыл бұрын
Ok, have you done it or do I have to challenge - Leatherman Surge file and saw? to 1/4 bit xtender (I have a Dremel to modify it)...
@dead_pixel_
5 ай бұрын
I like your jacket and cap ,what brands plz ?
@doublepanthers3088
29 күн бұрын
🤔 Runs to test this out.....😂
@s.a.n.d.3.r
19 күн бұрын
I have always done this with regular scissors too
@kevinstewart7792
Жыл бұрын
I’m on surge number 2, at least 10 years in and I’d get another in a heartbeat
@Mike-ql4sz
Ай бұрын
There shouldn't be any special technique 2 use the scissors - this is clearly a fault @ Leatherman. Victorinox Swisstool doesn't require any special techniques and cuts perfectly out of the box. Scissors & the special profile screw bits made me choose Victorinox instead of Surge.
@mannyz5307
Жыл бұрын
I did not know this. Thanks
@jamiem5068
9 ай бұрын
Giving off some strong Wranglerstar vibes on this one lol, but I bet you’re wearing shoes.
@MadMaxx89
7 ай бұрын
What do you mean lol he's giving off exactly 0 douchebag vibes totally opposite of wranglemystarfish.
@salvaged_wretch
6 ай бұрын
Nice 👍🏾
@jayef10
3 ай бұрын
This is actually just a tip to make any pair of scissors cut better. 😁
@edwardfletcher7790
2 жыл бұрын
I find your videos fascinating and have learnt a lot about customising my EDC gear. But, I always watch on one of my TV's and this vertical format either looks like shit, or doesn't work at all because it's in the annoying "Shorts" format. Could you perhaps do a survey of what percentage of subscribers prefer the standard Vs vertical ? Cheers mate 👍
@maxlvledc
2 жыл бұрын
Don't worry, If I do shorts it'd likely that I will also repeat it in a normal video. The idea is to provide content to a varied audience
@edwardfletcher7790
2 жыл бұрын
@@maxlvledc Thanks for responding 👍
@peddypeoples941
2 жыл бұрын
Man i dont like that the scissors on my surge have the spring tention so high, that if i let go of the lever i cant reach it with my thumb again unless i hold it awkwardly close on the front. I had luck, my copy doesnt have that much play, works quite nice just not for precise things, i fear cutting of my fingertip when shortening a nail on it. But that trick of yours is good, i used in elementary school on those rounded, messed up scissors for kids. And nowadays in fact for the big scissors in our kitchen.
@gleblipin
2 жыл бұрын
Like you do it quick )))
@macgyverbryan1377
2 жыл бұрын
A great technique for the Surge.
@enriquejosekravetzmalabud8530
Жыл бұрын
Why is a good thing the little play?? Good thing is using straight forward tool without learning "special" techniques
@jdfishing2572
Жыл бұрын
I always do that wit any scissor
@seapeoplesdidnothingwrong1307
Жыл бұрын
so like a normal pair of scissors?
@berrybushstudios5550
Жыл бұрын
Hey what's that saw hanging in the background called?
@maxlvledc
Жыл бұрын
I think it's a silky zubat
@berrybushstudios5550
Жыл бұрын
@@maxlvledc Ah! Very cool, Thanks
@BADD1ONE
11 ай бұрын
Why am I cutting paracord with scissors? There's a knife on the tool
@TheIronspike1982
11 ай бұрын
Gentle hammer the pin shaft, scissors play will be much close.
@countrybearcomp2016
2 жыл бұрын
Is that your new set up for videos?
@maxlvledc
2 жыл бұрын
In what way?
@maxlvledc
2 жыл бұрын
I'm just doing a couple of shorts so sub 1 min tips
@countrybearcomp2016
2 жыл бұрын
Like is this how you going to shoot your videos from now on?
@maxlvledc
2 жыл бұрын
@@countrybearcomp2016 not at all lol, it's in ADDITION to my other content. Not instead of
@dorianamish6785
Ай бұрын
No í cortan bien y en el modelo p4 está peor
@kahuna1247
2 жыл бұрын
Fail. Victorinox scissors don't need this comprising garbage. Leatherman needs to buck up and improve their shit.
@maxlvledc
2 жыл бұрын
Won't happen...20 years and still no major improvements
@kahuna1247
2 жыл бұрын
@@maxlvledc Dang! I've never owned a Leatherman, that's news to me. And people shit on Gerber but put up with this.... Time to hold LM to account considering their astronomical prices.
@jvman4971
Жыл бұрын
should be using pointer and middle finger to snip not your thumb
@randomescu
Жыл бұрын
I once get some play between the jaws of my Squirt by using it wrong. I was able to cancel that play by using a center punch on both sizes of the pivot. Then i realised i can do that to enhance the scissors too. I did not used that for any of my Surge's scissors, i enhanced them by simply sharpening them with a Victorinox diamond and ceramic file. But this technique is safer then center punching, that could lock the jaws.
Пікірлер: 46