Hi Guys!
I'm back with a new video! About how to applicate digital input and output using a push-button switch and external blue-red LED on ESP32 , Enjoy!
Materials :
1. ESP32 Module (Microcontroller)
2. Blue and Red LED
3. Data Cable
4. Jumper Wires
5. Resistor 330 ohm x2 and 10k ohm
6. Push-button switch
7. Arduino IDE
Негізгі бет LED Combination Using Push-Button Switch [Project 2 : ESP32 Digital Input and Output]
Пікірлер: 4