Love the look of the dash an hvac controls I'll have to buy the kit you sell I'm working on a 95 f-150 xlt supercab short bed
@chinookauto
Ай бұрын
Absolutely! Sounds nice!
@RobertOliveira-z4i
Ай бұрын
Looks awesome I'm working on a 95 f150 supercab
@AromaGod912
Жыл бұрын
Great video I appreciate you for uploading this!☝🏿🤞🏿
@chinookauto
Жыл бұрын
Thank you for your support!
@brianstevens5520
Жыл бұрын
Iv got 3 obs trucks I'm not sure what one to start on first the 93 long bed with the 5.0 ..the 95 extended cab 5.0 or the 96 short bed with the 5.8 but I enjoy watching your vids thank you for taking us along the journey have a good one 🍻
@chinookauto
Жыл бұрын
Much appreciated thanks for your comment!
@leonbrazell6958
6 ай бұрын
Good afternoon Great Video Step by Step. Do you have a Speedometer like the one in your Video for Sale ? Thank you so much for your Video and time.
@chinookauto
6 ай бұрын
I don't have an extra speedometer for sale! Sorry! Thanks for your comments!
@matthewgoins87
8 ай бұрын
Awesome video. Good work bro. I need to do this to my extended cab
@chinookauto
8 ай бұрын
I appreciate that! Thaks for your comment!
@robertolveira9527
8 ай бұрын
What is your web site
@chinookauto
8 ай бұрын
Here it is chinookauto.ca/
@jesusmartinez-bw1nm
Ай бұрын
Awsome video, what 3M products did you use on the gauge cover? Thanks, and just waiting for my HVAC cover i ordered from you a few weeks ago.
@chinookauto
Ай бұрын
Hey! Your order should arrive on the 15th! The covers are made with 3m Adhesive backing if that makes sense!
@jesusmartinez-bw1nm
Ай бұрын
Oh dang, I meant the buffing and polishing compounds you used on the plastic cover, but thanks, it's good to know you used high-quality products. I can't wait to install the climate control face. Thanks for the reply.
@chinookauto
Ай бұрын
Ahh gotchya! I’ll do a small short video with a bit more info and some links just give me a couple of days and I’ll send you a link!
@chinookauto
Ай бұрын
Hey sorry on the late response. Basically I just used wet sand paper starting at around 800, 1200, 1500, 2000, 2500 and then used a buffing compound and a polish. I'll try and get a video up in the next couple days another alternative is you could pick up a headlight restoration kit I would only use the drill attachment to polish and would sand by hand as the instrument cluster is pretty fragile. Hope this helps!
@spckovack
Ай бұрын
What head unit is that?
@chinookauto
Ай бұрын
Hey you can learn more about the head unit here! OBS F150 Gets New Radio Upgrade & Backup Camera! kzitem.info/news/bejne/tYaE2IRqq4t2hIY
@bobwise1347
Жыл бұрын
i have a 95 flareside that i got new on my 17th bday in march of 95. it is light opal according to the window sticker that i still have. 4.9 with 5 speed 187000 miles. it still wears original paint and will outshine new vehicles.
@chinookauto
Жыл бұрын
That’s great Bob! Would be great to see some pictures!
@bobwise1347
Жыл бұрын
@@chinookauto do you have an email i can send pics to
@chinookauto
Жыл бұрын
@@bobwise1347 chinook.auto@gmail.com
@franciscohernandez313
6 ай бұрын
Do you have a social media page/account to follow so the rest of us can see some pictures or videos? 😮
@JackieBurson
2 ай бұрын
Do you have anymore of the a/c gauge display left? If so how much?
@chinookauto
2 ай бұрын
Absolutely you can check them out here chinookauto.ca/product/92-96-f150-climate-control-illumination-cover-upgrade/
@leonbrazell6958
6 ай бұрын
What Model Speedo did your Unit come out of and what Year OBS. My Truck is a 1994 I won't to put a Tack in .
@chinookauto
6 ай бұрын
Hi, It is the factory Speedo out of my 92 XLT. I hope this answers your question!
@aaronred01
4 ай бұрын
Any updates on the truck?
@chinookauto
4 ай бұрын
Hey @aaronred01 The truck project was delayed big time due to work, moving, and a few other factors. I'll try to get an update video posted to explain the delays.
@aaronred01
4 ай бұрын
Thank you for the update and congratulations 🎉 best wishes to you and the family
@davidlouiso9650
9 ай бұрын
What did you do to align the oil gauge?
@chinookauto
8 ай бұрын
Hey, I just put the needle on hooked everything up and started the truck. I then played with the needles to ensure all were positioned right before the final installation. I hope that helps!
@scottalbanese295
8 ай бұрын
Do you have anymore of the climate control pieces? I'd love to change mine. Ed....sorry I just found web site and ordered.
@chinookauto
8 ай бұрын
We received your order and will get this processed and shipped out to you! Thanks!
@scottalbanese295
8 ай бұрын
2 orders went through some how. I only need 1 ordered. Please cancel 1
@AintScaredGarage
Жыл бұрын
That turned out great, I did mine in Red but I will plan on getting your H/Vac parts, I hope they last cause I cant quite swing it right now, the Radiator core support job on my 95 Flareside I'm doing ballooned out of control and I had spend more on parts then I planed, great video
@chinookauto
Жыл бұрын
No worries, jobs never go to plan! 😂
@1023llc
Жыл бұрын
looks amazing. inspired to modernize my OBS interior.
@chinookauto
Жыл бұрын
I appreciate the feedback! Absolutely worth it!
@joshhoffner3996
3 ай бұрын
I did this and now my needles don't move like they use to. Can you install them wrong? I didn't see in the video how you lined them back up
@chinookauto
3 ай бұрын
Hey, you can install the cluster but leave the plastic cover off. Turn the truck on and then install the needles. I found that to be the best way to get your needles lined up correctly. It might take a bit of playing with. Hope that helps!
@joshhoffner3996
3 ай бұрын
@@chinookauto sounds good I'll give that a try. Thank you
@matts6401
7 ай бұрын
Is there a good way to assure that the needles are reinstalled in the correct orientation? Getting ready to do this to my bronco. Great write up!
@chinookauto
7 ай бұрын
Hey thanks! The best way is to install the instrument cluster back in the truck but leave the needles off and clear cover off. You can then start the truck and then turn the truck off. Then reinstall the needles in the off position for each gauge. You can then test it again, make any adjustments and when you are happy put the clear cover back on! Hope this helps!
@matts6401
7 ай бұрын
Btw, if you have one of the hvac labels that isn’t dark enough would you be willing to sell it? I wouldn’t mind the red I’m installing bleeding thru. Let me know
@chinookauto
7 ай бұрын
Hey, I don’t have any of the old ones that have the black bleed through. The hvac controls we have in stock will shine through red if you use red LED bulbs tho! Hope this helps!
@matts6401
7 ай бұрын
Ok new question, I took off the clear cover then was taking off the black trim before taking off the needles and a little spring kind of fell out. Any idea what that could go to? Truck is a 95 bronco, automatic with push button 4x4
@chinookauto
7 ай бұрын
Man I have no Idea! It might be for the 4x4 button on the black trim?
@richardfillion5770
7 ай бұрын
I got the HVAC controls for my 92 and 95 Broncos, I put blue led in they look great ! I think the control face and dials are the same in my 99 Superduty so it will be getting the same upgrade!
@chinookauto
7 ай бұрын
Thanks for the feedback glad the install went smoothly!
Пікірлер: 54