This has become my favorite channel. Quick! Buy some more ill-advised crap for cheap and then get it to work!! Seriously. Dance for me youtube boy.
@thedoubtfultechnician8067
11 ай бұрын
Ughhhhhhh Fine.
@VoidedWarranty
2 ай бұрын
+1, love it
@ThatGuyOG_Rust
Ай бұрын
Yup, love this channel!! We could def have SO MUCH FUN if we were closer neighbors! Welp, minus the sssNICK’s!! Ill hug a momma bear before even…
@peternaur
3 ай бұрын
We all know that YT is made for living vicariously through other people - but it sure is weird that it's more fun to live through a guy who busts his knuckles on 80s Hondas, like I would, and not live through a basejumper with a jetset lifestyle.. Thanks for doing this - you are my hero!
@madmosinman
3 ай бұрын
I know it's been 11 months since upload, but I wanted you to know that I did indeed see spark.
@ollilehtonen6764
2 ай бұрын
After coming home from work, i have a habit of sitting down on the couch and eating something barely fit for human consumption, while watching some "will it run"-type of shit on KZitem. I gotta say, you had me choking on soggy microwave hot dog buns multiple time during these 43 minutes. Got yourself a new subscriber for sure my man🤙🏻
@hunterjohnson4411
19 күн бұрын
honestly one of the ebest youtubers ive ever seen started watching today with the soviet vs capitalist power tools and his account does not disappoint in any way he should have way more subscribers i just subscribed myself
@scottiehinkson6196
3 ай бұрын
Very entertaining video. You had me and my elderly father laughing hard at your colorful commentary. Especially how much fun kick starting it was😂😂
@jorgejasso3595
11 ай бұрын
Kudos man for getting it running, I watched the whole video and was glad you showed everyone closure with its resurrection from the dead!
@beachthor1
Ай бұрын
The Asian mechanic channels would have this puppy painted and running all in a 30 minute video. They'd even spend the first 5 minutes pulling it out of the ocean.
@lh-hw7il
3 ай бұрын
It's fun to see that your poor choices also extend to IT, where you actually bought an HP printer.
@gorak9000
2 ай бұрын
Their business laser printers are good (because they're made by Canon, and HP just puts the outer plastics and their name on it)
@jacksonstephens9772
2 ай бұрын
Underrated channel, easy sub for you
@1skinnypuppy
2 ай бұрын
Too cool man! Also I’m glad you could back up the fact that you don’t have to change the oil on Honda. Thank you for that.
@EngineMisfire
Ай бұрын
You have come a long way. Finish gathering parts here and there and finish putting it together.
@joshgreen2164
13 күн бұрын
Its got one too many wheels!! Love what you do!
@codysimon3548
2 ай бұрын
This channel is incredible and that intro is wonderfully artsy
@jessejames9420
2 ай бұрын
Invisibility paint... that gets a follow. Thank u for the laugh. That was awesome.. money shot!
@eaudesolero5631
23 күн бұрын
I don't remember what year model they were but I worked on a 500 acre non-profit Wildlife Preserve and we had four of these old things sitting around in various condition that I use to make one run. fun times
@andythedishwasher1117
2 ай бұрын
I enjoy the work ethic implied by your choice of projects and your approach to accomplishing them. You happened to notice that the dirty details of engineering had entertainment value, possibly by observing other KZitemrs or possibly just by observing your own work. Then you did a little extra engineering (and writing) to edit the process and make it even more entertaining. Good example for others.
@odcaveman6360
Жыл бұрын
keep up the good work
@estafador262dDelinquentovych
Ай бұрын
16:20 thats why my old good thinkpad x201 (mint linux os) is always a part of vehicle repairment toolset
@estafador262dDelinquentovych
Ай бұрын
I would definitely take the motor apart as well... Couple days more work, but when the motor rework is done, one source of failure eliminated
@CaddyWack1776
2 ай бұрын
Hands down my favorite channel now i love you bro lmao!
@thedoubtfultechnician8067
2 ай бұрын
ilu2
@nolan7457
2 ай бұрын
the shotgun fix is my favorite.
@16driver16
2 ай бұрын
Man, this is the only quad that could make me feel better about mine... its "finished" but i dont want to talk about wasted time and money...
@jimwolverton4086
11 ай бұрын
This video makes me so happy😂
@raabsand
3 ай бұрын
Mission success. Accolade earned. Spend more than its worth
@mul118
2 ай бұрын
What is your backstory with Carol? Was she in a previous episode? Also, love the snake blower!
@bobbofly
18 күн бұрын
25:17 Exit Freddie Mercury, enter Boots Randolph - & with astonishing speed. 😂😂😂😂😂😂😂😂😂😂😂😂😂😂
@ElijahMiniBikes
2 ай бұрын
That was a great video. I would say a a Good running parts machine. maybe some kid to pick up and learn on small engine repair.
@nathanwright8598
4 ай бұрын
A little dab of grease will stick the keepers to the valves so you don’t have to hold them while you release pressure on the clamp.
@VoidedWarranty
2 ай бұрын
and dear lord use forceps and keep your fingers out of there!
@poweredbyjunk6773
13 күн бұрын
“I need to stop drinking my cleaning chemicals” 😭
@lh-hw7il
3 ай бұрын
Why am I so happy it's running? Life is strange.
@PapaTanGh0stNI9htM4R3S0nMaInSt
2 ай бұрын
That thing will run forever.
@martintaylor984
Ай бұрын
Those solid front axle Hondas are kinda sought after
@aunabreslingaming3279
4 ай бұрын
Ive been on KZitem since 2011, youre the funniest peeson on here i know of
@davedemo8229
Жыл бұрын
hey get that Fluke calibrated. you are working on a high precision quad.
@rustyblade5845
3 ай бұрын
This is true to life, this is exactly what happens to me when I work on my pan. Including loosing the valve collets. Things breaking off and snapping and rounding off and having to cut things off. I rounded a head bolt off and had to cut grind the head off. Then the rounded off head bolt stump unscrewed with my fingers? Even though I tried welding another bolt to the head bolt and all the other tricks to get it off. Could I undo it, could I fook.😮😮😅
@Ottie193
Ай бұрын
Did not know that these came with a straight axle in the front before they had IFS
@lschevyguy4865
Ай бұрын
this is giving me head aches just watching this
@magoodada
2 ай бұрын
Dude kids are great. I have wayyyyyy too many tho. There were two many snakes.
@thralldumehammer
3 ай бұрын
Red Green is AWESOME!!!!
@VoidedWarranty
2 ай бұрын
As a Canadian, it honours me greatly to see an American correctly following the Red Green lifestyle.
@estafador262dDelinquentovych
Ай бұрын
In my country, Ignoring that neutral switch safety stuff would cost me a permission to used that vehicle on public roads. Ever heard of TÜV. But i tricked them one time with a sidestand, on my bmw k100 rs '83 bike. Original with spring mounted to get that tüv, & after that mounted one without the spring(more comort) from a later model, ignoring safety switches.
@MrJanaRobi
Ай бұрын
Build a cab on it ,of coarse . Great helmet !
@petero3972
2 ай бұрын
This guys the best
@vancemacd6315
Жыл бұрын
Dam good video. Hell yeah.
@ChrullOrson
Жыл бұрын
Kickstarting isn't that bad. It builds character. But then again, if I had snakes i my back yard I wouldn't spend a minute trying to fix an ATV. I would be on all four trying to make new friends.
@thedoubtfultechnician8067
Жыл бұрын
On a hot July day with no compression relief* Does thigh chafing count as character?
@davedemo8229
Жыл бұрын
hello dear we are having cylinder head for dinner. no different than putting my snowmobile clutch in the dishwasher. Kitchen appliances have multiple usages. Can anybody say powder coat oven?
@thedoubtfultechnician8067
Жыл бұрын
I keep doing this and barb will need a new oven. Everyone wins.
@thesausage351
2 ай бұрын
What is that helmet! I must have one exactly the same!!
@CaddyWack1776
2 ай бұрын
Was that an Arisaka??
@MrGoogy007
3 ай бұрын
The snakes freaked me out loool 😱
@XmarkedSpot
3 ай бұрын
You're hilarious man, insta-sub!
@henray76
3 ай бұрын
not only do i wright snap on on all my tools. I wright stanley on all my cups
@courier11sec
3 ай бұрын
One of the great unknowables in modernity will be how many absolute lost causes KZitem is responsible for bringing back.
@SlumsOfTroy
Жыл бұрын
Watching you sink time and money into this nightmare gives me more confidence in mine. It could always be worse... for me not you lol
@thedoubtfultechnician8067
Жыл бұрын
Glad I could be of service.
@VoidedWarranty
2 ай бұрын
*stares at my 600v 3 phase milling machine motor that really wants to run on 240v single phase with what I can scrounge from my yard* yup, kindred spirits.
@oceanheadted
3 ай бұрын
Did you notice the missing front wheel nuts at 38:29?
@acconboy
2 ай бұрын
Mosin nagant ftw
@glassjb
Жыл бұрын
You can stil do a top end rebuild with 2 kids
@tophu2894
Жыл бұрын
Hello, I recently came across a 1mzfe TRD supercharger kit for an auto car and I was hoping if you know where I can get my hands on one for a manual egr pipe? Is there anyway around this problem to get the car to run without the egr check engine light?
@thedoubtfultechnician8067
Жыл бұрын
The only difference between the auto and manual egr tube is the manual egr tube tucks in closer to the engine at the bottom so that the egr tube doesn't touch the shifter cables and melt them. The auto EGR tube sticks out a bit more but not much, as the automatic shifter cable stays further away for the egr tube. I swapped mine from auto to manual and I reused the auto egr tube and it still cleared the manual cables. It’s all about clearance.
@tophu2894
Жыл бұрын
@@thedoubtfultechnician8067 So I can run the auto tube on a manual car with no issue?
@thedoubtfultechnician8067
Жыл бұрын
@@tophu2894 I am, but you may not. Try it and see if it’s too close to the shifter cable.
@Ozmandius
3 ай бұрын
"what would you do" . go full rat build with it and start throwing on whatever i had around to make it into something. bathtub body? box fan with a power inverter? sky's the limit.
@danielcourtemanche7431
2 ай бұрын
Holy s@@@ YOU ARE AWSOME
@Tishers
4 ай бұрын
You know, a magnet would of found those valve keepers much quicker than you.
@Pilotman28
2 ай бұрын
The kid stripped everything. I hope you got it for $3
@jsmith6259
Ай бұрын
Rivers Cuomo does DIY-say it ain't so!
@Sugar3Glider
25 күн бұрын
Oil goes in the machine, not in the man.
@herzogsbuick
3 ай бұрын
neutral safety milk hotel
@PapWhiskyMooMoo
3 ай бұрын
. (i sprayed my comment with invibility ink, imported directly from China)
@matthumphries6004
3 ай бұрын
AvE vibes... 😂
@RK-kn1ud
Жыл бұрын
I'm only 3 minutes in, but Spark has timing, Fuel has timing, Compression has timing, and Air has timing. Timing (ASSuming you meant spark timing) isn't it's own major component of a running ICE engine. An gasoline ICE engine with sub-optimal spark, fuel, air, and compression TIMING may possibly still run. However, if you completely omit any of the 4 major ingredients, you have an engine that doesn't run. Timing isn't it's a major component...it's a subset of something else.
@minig646
Жыл бұрын
I would say that’s debatable. They all share timing as a common theme, but in the context of the troubleshooting process, mechanical timing is distinctly separate.
@thedoubtfultechnician8067
Жыл бұрын
I meant mechanical timing but you’re right they’re all related
@LinusScrubTips
3 ай бұрын
Dude my hp printer does the same bullshit I hate it
@whollymindless
28 күн бұрын
So many cultural references..
@camillosteuss
4 ай бұрын
Dayum, is that a crack on the side, just where the ``honda`` cast in logo is... On the other side than the one with the starter motor... Quite close to the kick-starter, in one of the curves of the casting... That ain`t no schmoo, that`s a crack, and not one that you can appreciate... What the fuck did that kid do to that poor thing... I`ve seen scrapyard stuff in 666x better condition... This is just satanic level of mistreatment...
@thedoubtfultechnician8067
4 ай бұрын
Damn you for making me go out to the yard and check! Appears to be an intentional part of the casting. Didn’t see anything cracked. Phew!
@camillosteuss
4 ай бұрын
@@thedoubtfultechnician8067 Damn glad... It sure looked like a crack to me... Maybe it`s just a crease in the material, a wrinkle of sorts, that got accentuated by dust and grit in it, thus appearing to me as a crack... Phew indeed... Cracked castings are a nightmare of the worst sort, just second to getting caught by a large lathe chuck at around 80rpm... Yikes... All the best!
@camarors91
5 күн бұрын
The man hours not worth it
@aunabreslingaming3279
4 ай бұрын
Sssssssssssss
@e.v.a.l.s
20 күн бұрын
actually nasa uses the industrial grade yellow zip ties
Пікірлер: 93