Need this for sure. This Crack has appeared on nearly all of my Legos. Lego needs to stop making cheap crap. We pay enough for them that they should be superior quality.
@timohara7717
Жыл бұрын
maybe dont do whatever perverted crap you do to them as only 3 of my FIGURES and one off brands peice hgas broken
@timohara7717
Жыл бұрын
or your not a lego fan and have 3 figs one blocik
@noone-ni4pz
11 ай бұрын
@@timohara7717 some colors and older bricks can be more prone to cracking
@davidboyd4026
11 ай бұрын
Yes😞🤔
@spicypickle7279
7 ай бұрын
Got a 501st trooper that needs repair, this helped a lot especially with the insight on how to take off the arms properly. Thanks!
@davidboyd4026
7 ай бұрын
Glad it helped 😊
@lukasfilmproductions971
3 жыл бұрын
Ingenuity at its finest
@jennifergreen2340
3 жыл бұрын
Very good and helpful
@FalloutFan2580
3 жыл бұрын
Genius indeed
@djangofett4879
2 жыл бұрын
I have Tamiya Extra thin styrene cement. need to test that out and see if it will work. i have a throwaway figure that i can test it on before i use it on anything i dont want to mess up 😅
@TiptopBreak
2 жыл бұрын
Thank you ima waste a whole can of that stuff on my clone army😂
@davidboyd4026
2 жыл бұрын
😳🤣
@PhantomGamerXYT
2 жыл бұрын
Yeah I’m Trying to fix My FFH Mysterio to make a green goblin moc since I’m getting a NWH mysterio set
@davidboyd4026
2 жыл бұрын
Fantastic 👍😊😁
@matthewparker1655
Жыл бұрын
Sorry for commenting late, but does the liquid cement last? Or do the cracks reform over time? I'm trying something similar with my figures.
@davidboyd4026
Жыл бұрын
The liquid cement mostly fills the void. But the figure is fragile. ABS cement will bond the plastic. But may cause a melting damage. I have had mixed results. If you have brittle browns or dark red you can experiment. So as to not damage a rare figure 👍😁
@matthewparker1655
Жыл бұрын
@@davidboyd4026 Okay, thank you for replying!
@andrewmdoza
2 жыл бұрын
Exact minifig that’s got a crack
@DeadBrix
3 жыл бұрын
That's a genius idea for fixing Lego torsos
@yaboydean8635
3 жыл бұрын
This is very Genius so you do not have to buy new parts for mini figs.
@parsavafaii6227
3 жыл бұрын
Excuse me. I didn't understand. How did you repair minifigure's torso and armpit crack ? Can I use normal glue for repair ?
@davidboyd4026
3 жыл бұрын
I used a styrene model glue. Depending on the Minifigure.. ABS pipe glue works if the torso is cracked on both sides. Oatey makes ABS cement. Testors model glue.
@parsavafaii6227
3 жыл бұрын
And bro did you ever see a broken Lego Minifigure head , or do the Lego minifigure's head break or crack or not?
@davidboyd4026
3 жыл бұрын
@@parsavafaii6227 never seen a broken head. Just torsos and some plates. Especially blue tiles. New dark red. Too.🤔. I showed a broken reddish brown one that arrived cracked
@parsavafaii6227
3 жыл бұрын
@@davidboyd4026 Ok thanks.
@LocLocco.
11 ай бұрын
Does the cement leave a mark? Is it noticeable after dryingb
@davidboyd4026
11 ай бұрын
Yes the crack may still be slightly visible. With a clear thin line of cement. Or just the thin crack showing.🤔
@dolan9k
2 жыл бұрын
step by step tutorial?
@easnchz
2 жыл бұрын
put glue on the crack outside and inside and put a clamp on the torso to close the crack
@easnchz
2 жыл бұрын
and let it dry
@dolan9k
2 жыл бұрын
@@easnchz I tried it a couple days ago, I tried fixing one side cause it was the only side that cracked and failed twice. There shoud've been warning to wear a mask because of the chemical smell and that if the residue gets on the torso the print comes off sadly.
@Brabbs
Жыл бұрын
@@easnchzwho the hell has a clamp?
@Brabbs
Жыл бұрын
Take the other parts off untill its just a torso. Glue it and then *Use books* (or a heavy book.) To keep it in place.
Пікірлер: 37