You can get away without cutting the film with 2 tricks. You may use a piece of thin cardboard between the film and the sprockets while insterting the spools, or with the lens removed you can open the shutter in B mode and fiddle with the film a bit to guide it in the right place. Thanks for the video and have fun :)
@tomscameras
11 ай бұрын
Many thanks for that info! Might be really valueable in case I forget to bring scissors to the location!!
@crispin8888
11 ай бұрын
@@tomscamerasI always pre-cut the film. 🤓
@tomscameras
11 ай бұрын
@@crispin8888 that’s the best way to do it! I think it shows I am not a long-term LTM Leica user yet :)
@crispin8888
11 ай бұрын
@@tomscameras I love my iiig. And it's light on long walking days.
@steveandthedogs
11 ай бұрын
Newton-Ellis in Liverpool UK did a lovely job of re-silvering the mirror in my IIIf. Not too expensive either!
@tomscameras
11 ай бұрын
Many thanks for your information! 😍 These days it is really valuable for us, because less and less places service the old cameras!
@donaldcongdon9095
11 ай бұрын
Lovely images, great video! I have a IIIc with the 50mm f2 Summitar, and it’s an amazing camera. Love to shoot it. It feels so professional and well made. You can see why Leica has always been such a desirable brand.
@tomscameras
11 ай бұрын
Yes, especially the finish of these cameras is so unbelievably nice!
@TXGRunner
3 ай бұрын
That is a gorgeous location. I was disappointed the Kodak Portra washed out or muted the greens and reds. In the video, the leaves seem vibrant, including the ivey changing color. In the scans of film images, the reds disappear and the greens all lean towards olive. The blues and yellows remained vivid. The camera is fantastic, depending on the type of photography being done. I have 4 Barnack Leicas, all pre-war, and an M6 TTL. The Leica II gets the most use, followed by the IIIc.
@tomscameras
3 ай бұрын
Thanks for your feedback! Please keep in mind that a lot of the color shift might also be caused by scanning and post processing these scans. My scanning skills are limited :) … I reckon most analog negative images do look much better in terms of color when you do an analog print in the darkroom … better than any scan! And yes I totally agree: the Barnack Leicas are fantastic, but not for every type of photography!
@manugeee
11 ай бұрын
Nice video, Thomas. 😊 The barnack Leicas area really really charming and finally i know the differences in all the different types and letters. But everytime I see and read the handling and the film loading, I fear that this one slows me down too much, when taking photos with on trips with my family (and especially the kids!!!) 😅 😉 The area Looks like a really beautiful place for a vacation. 👍
@tomscameras
11 ай бұрын
The film loading looks worse than it is - especially as what you see in this video is my first attempt at it, so I guess it gets much easier the more often you do it. (Okay, I briefly had a FED camera in the late 1990s ...) The focusing, that's why I was showing the 28mm lens where focusing becomes much more easy, so maybe using a wide-angle lens is a good way to start with Barnack Leica's. Also the auxiliary finders are much bigger and nicer, that's true ...
@codiecrieg2480
9 ай бұрын
Amazing camera. I have Leica IIIa model G :3
@tomscameras
9 ай бұрын
Many thanks! As much as I like the later "unibody" Barnack Leica's like mine, I also love the old ones. The IIIa is a classic beauty!
@donnajang649
10 ай бұрын
Merci beaucoup !
@tomscameras
10 ай бұрын
Je suis contente que ma vidéo vous plaise !
@peterrenn6341
11 ай бұрын
Great video. I have a IIIa and love using it. Leitz used to sell a film-trimming template (code ABLON) but they are super-collectable and expensive now. I made my own from two pieces of plastic and some tape. The advantage is that you can trim film exactly to size quickly and easily -even with a penknife.
@tomscameras
11 ай бұрын
Sounds like a great item to hunt for, thanks for the advice! But yes I get it's very rare!
@tonyperez5360
3 ай бұрын
Thank you
@tomscameras
3 ай бұрын
You're welcome! Glad you liked the video!
@Carlos_Rosales_Gross
10 ай бұрын
Tom, to load the film, don't cut it, just use a visit card to get the film in the right position!
@tomscameras
10 ай бұрын
Oh, thanks for that tip, I have to try that out!
@marclaloux633
11 ай бұрын
Si le leica date de 1953 , je pense qu'il s'agit d'un iii f . A vérifier . super video comme toujours
@tomscameras
11 ай бұрын
Merci pour votre commentaire ! La différence entre le Leica IIf et IIIf est que seul le IIIf dispose des temps d'obturation longs jusqu'à 1 seconde. Vous pouvez voir que la molette pour les temps d'obturation longs est absente sur le IIf. Ils ont été fabriqués en même temps !
@marclaloux633
11 ай бұрын
Merci de la precision , j'aurai appris quelque chose .
@dukenukem5768
8 ай бұрын
Do the lenses have filter threads? If so you could always use a screw-in close-up lens, although I don't know how you would focus. It is an interesting classic, but I would not want to use one seriously.
@tomscameras
8 ай бұрын
Yes, there's all sorts of attachments and add-on viewfinders and what not else for close focusing. But you won't use any of that anymore these days ... because any SLR camera is so much better at this.
@ssilanes
11 ай бұрын
Is Portra 160 the 16 euro film that makes autumn reds disappear?
@tomscameras
11 ай бұрын
I think, it's the one you are referring to. About the colors, they are also depending on your scanning and post production ... :)
@AntonyBall-h9g
11 ай бұрын
Hi Tom its not for me unless you preload it for me haha I don't have the patience for it I don't think.......
@tomscameras
11 ай бұрын
Yes, loading is quite something. Even though you get used to it after you've done it a few times. If you know before that you're gonna shoot a few filmes with a Barnack Leica, you can at least do the film cutting/trimming part at home :)
@CzejenAndCodaj
6 ай бұрын
I'm sorry but You cut it wrong :< You cant leave such big cut near begninng of the spull :< Film can stuck. I did that way and i broke my camera T-T Also great material :> Hand up!
@tomscameras
6 ай бұрын
Thanks for your comment! Yes, my film cutting was a bit clumsy. Thankfully it worked out okay!
@CzejenAndCodaj
6 ай бұрын
@@tomscameras I'm glad I could help at least a little bit. I really liked your movie ^^ Best regards once again
@philwoodall9023
3 ай бұрын
@@CzejenAndCodaj Yes it's best to get it right and I prefer this to the card method. There are a few 3D printer files available on line to replicate the original Leica Ablon metal template.
Пікірлер: 36