I filmed this video in August before the RTX 30-series announcement, so while it's "only" using an RTX 2080 Super, the PC turned out beautifully and it was nice to build once last system before all the Ampere mayhem began. Hope you enjoy the build and have a kickass day!
@ismailmoukhlis2652
4 жыл бұрын
First
@anonymous2804
4 жыл бұрын
@Bitwit No u
@xplodingmojo2087
4 жыл бұрын
We will have a nice day Kyle, thanks.
@theolee7936
4 жыл бұрын
Hello kyle
@Garryy_
4 жыл бұрын
I wish I had that pc mine is dying on me
@rishabhmalkani9631
4 жыл бұрын
This is a refreshing break from all the 30 series announcements and benchmarks. Thank you Kyle.
@entruh4520
4 жыл бұрын
@Ladioz nobody's talking about the super, they're talking about 2080ti
@Kanekex
4 жыл бұрын
@@entruh4520 exactly
@gametests
4 жыл бұрын
Even "Obama says go to children hospital and pay the bills." Check it on ma channel before it's recommended after 10 years! :)
@tnix80
4 жыл бұрын
Doesn't change the fact it's fucking stupid to buy and build now. Get the old hardware dirt cheap on black Friday.
@entruh4520
4 жыл бұрын
@Ladioz im just happy with my xfx rx 580. But my cpu is dogshit its a ryzen3 3200g
@brned1692
4 жыл бұрын
jeez Imagine just thinking “hey i wanna build a pc today” and actually being able to build a pc today
@3p11c2
4 жыл бұрын
yea tht be the best
@pinchpeak5203
4 жыл бұрын
And then not even using it for anything
@farithrosh
4 жыл бұрын
Read pinned
@farithrosh
4 жыл бұрын
I really wanna build a pc :(
@iTzNiKoYo
4 жыл бұрын
get a job building PCs lol
@ryantam2340
4 жыл бұрын
11:55 is it me or he didn't peel the protective thing off the m.2 cover shield thing
@Theres_No_PlanetB
4 жыл бұрын
I think he forgot...
@davidkuwateedza9869
4 жыл бұрын
@@Theres_No_PlanetB he forgot
@ay2987
4 жыл бұрын
your profile pic GOT ME bro i'm so ashamed
@marshalltucker8202
4 жыл бұрын
@@ay2987 He got me too, now I have a smudge :(
@mateofantasma
4 жыл бұрын
I saw that and it has been bugging me since. I watched the rest of the video hopeful he will remember it later...
@vinn7727
4 жыл бұрын
Kyle : **Didn't pull the blue plastic piece off the M.2 Heatsink** Me : "Hmmmm, seems legit..."
@slushie3061
4 жыл бұрын
Nice
@alexanderjohansson2671
4 жыл бұрын
Think he purposely left it on as he wanted to use a different NVME drive.
@josephbhumphrey
4 жыл бұрын
The things you see when watching “professional” techtubers build....
@siddharthgaur5650
4 жыл бұрын
Gosh! Someone noticed it.
@SinaShahsana
4 жыл бұрын
@@alexanderjohansson2671 he can use it again even if he removes the film , he just forgot.
@nova046
4 жыл бұрын
Kyle: rips 3800xt out of box and drops it on table Me caressing my 3600: *crie *
@jonathansosa4190
4 жыл бұрын
when i saw that i wanted to cry and go hold my 3600
@Pozuda
4 жыл бұрын
I kiss my 3100 everyday
@t_rimor
4 жыл бұрын
Bro he is actually scaring with the way he is handling a cpu that is more expensive than my entire pc
@ryanolsen294
4 жыл бұрын
piolpo Piovanna lol
@entruh4520
4 жыл бұрын
@piolpo Piovanna lmao
@luckysingh-lh4hf
4 жыл бұрын
I feel u man.
@lilaznboi5582
4 жыл бұрын
Ikr! When he put the cpu on the wooden table 😯
@gametests
4 жыл бұрын
Even "Obama says go to children hospital and pay the bills." Check it on ma channel before it's recommended after 10 years! :)
@StructuresMadeSimple
4 жыл бұрын
"I don't want your mom and dad to hear this." *me, a grown-ass man watching this on my lunch break in my apartment where I live alone.
@MarksterC
4 жыл бұрын
rip
@benskyddd
4 жыл бұрын
rip
@rugbytimezone5480
4 жыл бұрын
rip
@goldenarygoldc-3457
4 жыл бұрын
Damn bro I hope you find a wife and have kids and get a nice job with good payment
@alexrossmann7672
4 жыл бұрын
We call that living the dream.
@cappachino20
4 жыл бұрын
Kyle Thank you for this. Work was going on the stressful side and watching this on my break has me dying of laughter. This was refreshing and much appreciated. You continue to be my favorite PC guy to watch. Keep it up (woohoo).
@OurWickedLives
4 жыл бұрын
Kyle sounds like he's losing a little bit of his mind after every single episode
@theigorotbonsai
4 жыл бұрын
hahaha i agree. maybe just part of the being silly or funny
@DogeyDood
4 жыл бұрын
i agree lol
@coffeegeek54
4 жыл бұрын
I agree. I am turning volume down more and more due to silly dialogue. Always great information. Not giving up, just turning down 😟
@robert4you
4 жыл бұрын
I think it's this damn Corona virus, the lockdowns, quarantine, new outbreaks, the slow panic, face masks, tension and everything... In the end maybe we all lose it ;-)
@ulysses2162
4 жыл бұрын
Kyle is the only tech channel I can watch these days. I think it's because he's humorous and entertaining, as well as knowledgeable. Some other PC tech channels are just far to boring, and take themselves far to serious. The humor and "silly dialogue" is what keeps me coming back to this channel.
@chorba
4 жыл бұрын
Everyone: you should get a tripod Kyle: we don't do that here
@gvnady8380
4 жыл бұрын
2:36 *Kyle the "One-Handed Legend"*
@hypaau5131
3 жыл бұрын
didnt ask
@Ballman100
4 жыл бұрын
Bitwit: I have a tripod Bitwit: I won't use my arm as a tripod Bitwit: HAHA BUILDING A PC WITH ONE HAND
@MarioMagdy
4 жыл бұрын
yup i wish he sets the camera down . it slightly bothers me
@AxR558
4 жыл бұрын
I genuinely had to stop watching half way through due to motion sickness
@KeithMickunas
4 жыл бұрын
These one-handed builds, and anything else he does with just one hand, gets frustrating to watch after a while. It's a tiresome shtick and he needs to leave it behind.
@CARLOS68
4 жыл бұрын
Yep can't be arsed watching anymore, sick of this one handed crap
@audisentor
4 жыл бұрын
Yep stopped watching his vids because of the one handed filming as well.
@tannertaviano1284
4 жыл бұрын
That case would match soooo good with the rtx 3000 series founders edition cards
@neillgeldenhuys7305
4 жыл бұрын
Just as he said let's not talk about the gpus right now😂😂😂But I totally agree🔥
@aron6998
4 жыл бұрын
Which is probably what will happen
@Abo_jasim313
4 жыл бұрын
Let them be in stock first
@aron6998
4 жыл бұрын
جمس بهبهاني he has a review card already just use that
@richardkiereama7072
4 жыл бұрын
@@aron6998 he said he filmed this before 3000 was announced
@techinformer8993
4 жыл бұрын
"Screwing in with confidence I rrike your style." -Lyle
@rupivisuals
3 жыл бұрын
“Like”.... “kyle”
@That-one-guy-named-Neo
4 жыл бұрын
This is LITERALLY almost all the parts I want for my PC that I have already picked out parts for. Thanks for teaching me how to build my own computer!
@rikardostoilov
4 жыл бұрын
11:47 he left the sticker on the m.2 slot.
@taakotruck1894
4 жыл бұрын
I was looking for this comment 😂
@William.N
4 жыл бұрын
I hope he doesn't call us angry nerds for seeing that.
@panteradown2
4 жыл бұрын
Yeah saw that and looked for someone else that saw it to.
@MrJerczu
4 жыл бұрын
He laughed at Verge guy... Bit ironic that.
@pexunfuni
4 жыл бұрын
and it was not an accident.. he's gonna reuse this mobo and these drives don't run so hot to be a real problem
@lighttitan4419
4 жыл бұрын
“Stay Hard, Play Quiet - Kyle 2020
@cokie4760
4 жыл бұрын
Sounds like a porno
@peytonspearman1862
4 жыл бұрын
Kyle: *Puts Ryzen cpu pins down on table* (2:49) Me: “NOOOOOOOOOOOOO!!!!!”
@tbecket4890
4 жыл бұрын
Yeaa this was painful to watch....."What are you doing?!!"
@nehemiasramirez724
4 жыл бұрын
I’m glad someone said something
@ianhabiuk9848
4 жыл бұрын
Yeah that and the Verge amount of thermal paste he put on that CPU
@wrestles4food
4 жыл бұрын
Yea flailing the screw off the screwdriver into the socket made me cringe a bit.
@yovimrbl
4 жыл бұрын
Kyle literally works with thousands of dollars worth of pc parts everyday. lol this man could care less if that cpu dies 😭
@nowiknow6005
4 жыл бұрын
wow, he just sets the CPU's on their pins carelessly rather than spending 10 milliseconds to flip it over lol
@Sinsanatis
4 жыл бұрын
thats been done here and elsewhere a bunch and for b roll too. but dam 10ms?
@nowiknow6005
4 жыл бұрын
@@Sinsanatis I think about 10 milliseconds because He had it correctly but flipped it upside down, and even if he did have to flip it over to set it on its back, it takes less than half a second, so maybe not exactly 10 milliseconds lol
@roomba.
4 жыл бұрын
Imagine he ACCIDENTALLY dropped something in it if that was me there would be a hole in my wall
@snoweie4367
4 жыл бұрын
I just built my first gaming pc a couple weeks ago after binge-watching hundreds of hours of pc build videos to mentally prepare myself. It’s nice to be on the other side watching.
@jacktrump1779
4 жыл бұрын
BRO YOUR M.2 YOU FORGOT TO PEEL OFF THE HEAT SINK 😭😭
@Theres_No_PlanetB
4 жыл бұрын
Yeah.
@Perfectcrime87
4 жыл бұрын
I was checking to see if anyone else commented on it before i did lol
@greybeardtech821
4 жыл бұрын
@@Perfectcrime87 Same lol
@Pavlis83
4 жыл бұрын
He didn’t forget. KZitemrs disassemble the builds after they finish with video for future use.
@evolcraft9774
4 жыл бұрын
Here comes Lyle now...
@xplodingmojo2087
4 жыл бұрын
“It’s nearly impossible to kink.” “It’s impossible to pull out” I am going to interpret all that sexual.
@srinivasrengarajan4761
4 жыл бұрын
Big black cooler
@sir1liner614
4 жыл бұрын
thats what she said
@AK-nf2jl
4 жыл бұрын
"Stay hard play silent"
@sir1liner614
4 жыл бұрын
Julian M wth
@ghostmouthzach56
4 жыл бұрын
based coomer
@merciitm
4 жыл бұрын
He left the sticker on the m.2 drive cover lmao 11:51
@vsotero
4 жыл бұрын
lmfao
@boggakjetil
4 жыл бұрын
Checked comments just to see who else saw that lol
@CotyTernes
4 жыл бұрын
Drove me crazy! They didn't even catch it during editing!
@alxkw6355
4 жыл бұрын
Saw it too! It's still there at the end of the video you can see it a few times 👍 Pull the tab Kyle!
@quinnroberts6091
4 жыл бұрын
Doctor: Tell me where it hurts Me: It hurts in my brain. Every night I have nightmares of Bitwit touching the pins. ALL the pins doc! ALL OF THEM!
@skitz9125
4 жыл бұрын
I love your rambling nature lol im the same way when im working, researching upgrades I can never buy haha. HUGE fan of the channel btw keep it up
@heressmile7581
4 жыл бұрын
Me:being precise when building a pc so I don’t break anything Kyle: **slaps motherboard and drops cpu**
@3CODKing
4 жыл бұрын
Bruh for real, I was taught to handle these things with extreme care and caution so watching this kind of felt like my soul was getting ripped out.
@Mufflin
4 жыл бұрын
@@3CODKing Then how did it feel watching the verge video?
@sillyme2598
4 жыл бұрын
@@Mufflin maybe it finally ripped his soul out
@3CODKing
4 жыл бұрын
M i try NOT to watch his videos...
@AshutoshGanotra
4 жыл бұрын
12:00 : You forgot to remove the adhesive sticker from the heat sink / shield of NVMe Drive.. The Verge : Yes ! Lyle : He's not my brother !!
@taikiat
4 жыл бұрын
i was thinking the same thing, then again maybe gen3 doesnt care at all hehe
@AshutoshGanotra
4 жыл бұрын
@@taikiat I think it's not about gen3 or gen4, but that drive does heat up extensively and that plastic thing can eventually melt with an extended period of usage...
@watercannonscollaboration2281
4 жыл бұрын
I found the comment, was going to like this, then realized that it had 69 likes and I didn't want to ruin it
@desertadam7279
4 жыл бұрын
Thermal pad?
@AshutoshGanotra
4 жыл бұрын
@@watercannonscollaboration2281 but now it's 74, may be you can now like it. The Verge : Yes !
@NikhilTalksTech
4 жыл бұрын
Is it just me or does the CL500 match perfectly with the RTX 3000 Founders cards. Kyle, If your seeing this then try dropping in an RTX founders card and show it to us.
@drewisa7977
4 жыл бұрын
"There's a lot to love here" *slaps motherboard* me: *cringes*
@lyneo5807
4 жыл бұрын
You: posts this comment me: *Cringes* jk love ya have a nice day
@farithrosh
4 жыл бұрын
cringe
@danielhathaway7728
4 жыл бұрын
what a wholesome video idea. +1 respect.
@sebastianochoaaispuro6351
4 жыл бұрын
My heart dropped when he put the cpu on The table with the pins down 😅
@Overlordtgk30
4 жыл бұрын
sebastian ochoa aispuro yeah lol
@ssamy2561
4 жыл бұрын
11:57 when you forget to peel the plastic
@adamya1639
4 жыл бұрын
He will disassemble so it doesn’t matter
@joshuagao4660
4 жыл бұрын
MSI: Play hard, stay silent Kyle: Stay hard, play silent
I do believe taking the plastic off of the m.2 heatsink cover may help with cooling the m.2 drive even though it is a peasant gen 3 one
@dylanburkholder4995
4 жыл бұрын
very happy to see a deepcool build since im a big deepcool fan and not many people actually make videos using their products
@elliotbyrne6180
4 жыл бұрын
Tbf I am surprised that my boy hasn't gotten a cameraman by this point, could up the production quality a little bit 🤔
@markiep8477
4 жыл бұрын
I think the sloppiness is part of his aesthetic.
@krig6230
4 жыл бұрын
@@markiep8477 yeah its more entertaining this way
@scottyhaines4226
4 жыл бұрын
His crude filming style matches his sense of humor
@roomba.
4 жыл бұрын
I thought he had one what happened to him?
@fern4753
4 жыл бұрын
I love kyle's energy while he builds a pc lmao he's so energetic
@ASidkun
4 жыл бұрын
Kyle: "God, I'm lazy" Also Kyle: Spends half an hour building a PC
@woozytomx6702
4 жыл бұрын
took me a month to finish my pc lmfao
@gabithink5079
4 жыл бұрын
woozytomx wtf did you put in a part a week or sum
@fluffyellfuego8162
4 жыл бұрын
You spit out double meanings and bad puns faster than Eminem in rap god.
@ChaosXOtaku
4 жыл бұрын
Why are you holding the camera when you could mount it to your chest
@headclicker6245
4 жыл бұрын
7:11 did he remove the thermal paste already applied to the cpu or did he pull a verge
@thedominator87
4 жыл бұрын
bitwit: "i hope you are listening to this with headphones, wouldnt want your parents to hear this" me: "headphones do NOTHING to mask the level of giggling though!"
@nrgbladex7670
4 жыл бұрын
Me: takes months of planning and work to build pc Kyle: I'm bored. Well gotta build a PC!
@Jacklemonster
4 жыл бұрын
did you forget to remove the piece of plastic on the NVME heatsink lol
@JJF2006
4 жыл бұрын
Question: what do you do with the pcs you make but don't use, do you make them and then take them apart for parts or give them to your family or what?
@adamya1639
4 жыл бұрын
All utubers disassemble everything except personal pc’s
@DeathScy7he
4 жыл бұрын
11:56 forgot to peel off the covering from the M.2 shield before screwing it on.
@AshutoshGanotra
4 жыл бұрын
The Verge : Screw that hard, but not screw that enough !
@bdhale34
4 жыл бұрын
He also installed the PCIe power to the video card backwards so the pattern of colour on the cables is not uniform with the other two plugs... ate at my ocd the entire time he was showing it..
@Nozizaki
4 жыл бұрын
The music that starts at around 4:12 and plays for most of this video is "Detergent" by Dylan Sitts, for those of you looking :)
@lewisstroud4839
4 жыл бұрын
30:05 Love the new wireless PSU power dongle!!!
@japonezu_1979
4 жыл бұрын
lol
@vinnreaper7984
4 жыл бұрын
Thumbs up for the one handed management!
@theoncomingdork
4 жыл бұрын
kyle: it's got 12 phases, a whole dozen phases for you to drool over me: **nodding along like i understand what he's saying**
@wimvanerge5210
4 жыл бұрын
0:42 4 more cores and 8 more threads
@josiejuicewilder8911
4 жыл бұрын
I was beginning to think I was the only one that noticed that. Great math skills Kyle. 🤣
@wimvanerge5210
4 жыл бұрын
@@josiejuicewilder8911 lol
@Overlordtgk30
4 жыл бұрын
Don’t worry soon you’ll find 5 more mistakes he made
@IconikDrew
4 жыл бұрын
Yup, thought I was the only one too. Glad I looked through comments first.
@wimvanerge5210
4 жыл бұрын
@@Overlordtgk30 still gotta watch the full video lol but I'll try
@droidstrikerecords5645
4 жыл бұрын
Close your eyes and listen from 11:19 Lmao
@IBims1Mark
4 жыл бұрын
c o n d o m
@vijayshetty4494
4 жыл бұрын
never gonna watch his videos without headphones from now on lol
@VentusHarpus12
4 жыл бұрын
Why
@kavelab699
4 жыл бұрын
The way he handles all these expensive parts scares me
@chaoticdominance
4 жыл бұрын
Why is nobody talking about how this guy built an entire pc with one hand
@rohinhans7819
4 жыл бұрын
He didn't tho 😂
@renzler3534
4 жыл бұрын
This should totally be named the Knight Rider KITT build!!!! Awesome job man!!!
@sielhavila1906
4 жыл бұрын
I like how he handles the parts like they are indestructible, i would handle them with gloves and padding everywhere
@robertprovost6311
4 жыл бұрын
Once you get to about your 10th build or so you get used to how much they can actually handle, they're actually surprisingly hard to mess up
@reyluna0
4 жыл бұрын
You always manage to get me laughing when you say "Clear Stripper Heels Fans"
@klastubeyt
4 жыл бұрын
“Stay hard, play silent.” - Bitwit 2020
@saraisawesomeful
3 жыл бұрын
The way you toss around expensive PC parts makes me feel a lot better for some reason.
@troymeredith521
4 жыл бұрын
8:31 This is the second time I've seen this today. Are DDR4 RAM connectors all Wavy or is that a camera illusion? The center have longer contacts than the edge? As much as I've used DDR4, I've never noticed this.
@howtofixyourtech9945
4 жыл бұрын
Troy Meredith yeah that is weird?
@kiskygamer6996
3 жыл бұрын
They are like that so they only fit one way on the MOBO
@oscarstar1232
4 жыл бұрын
drinking game: take a shot every time he makes a "that's what she said joke"
@frommatorav1
4 жыл бұрын
You're gonna get somebody hammered.
@frommatorav1
4 жыл бұрын
@PCDYYD don't know BRACE actually
@talz9592
4 жыл бұрын
2:35 😂I’m so gentle with my CPU’s and then you have Kyle: 7:44 lol
@Gamer23car
4 жыл бұрын
*plops down cpu with pins down hard*
@tashagroenewald5228
4 жыл бұрын
When it fell on its pins 😱😂
@nphil93992
4 жыл бұрын
It could be worse, you could do a Linus and break a $10k cpu
@tashagroenewald5228
4 жыл бұрын
@@nphil93992 a Linus 😂😂😂
@vanicarts5065
4 жыл бұрын
I have everything at home to build my pc, the only part that's missing is a rtx 2080 ti and this dude just builds a pc cos he needs a break.
@roomba.
4 жыл бұрын
I wanted to build one since two months ago... I still havent gotten one piece Edit: update I got one piece..... Its the case
@michaelwelps6607
3 жыл бұрын
@@roomba. you built the pc yet
@roomba.
3 жыл бұрын
@@michaelwelps6607 im brokeeeee ~_~
@s0ulr3ap3r8
3 жыл бұрын
@@roomba. same 😭
@MrBuzznut
4 жыл бұрын
I have a love/hate relationship with the protective plastic. I mean the peeling part is awesome...but it increases ten-fold the probability that I will have to go in and fix some things resulting in scratches and/or fingerprints everywhere. Sometimes I will just leave it on for a couple of days. Or until the OCD anxiety builds.
@mkohanek
4 жыл бұрын
Is the pattern you ended up with on the GPU cables what you intended? It seems like if you switched sides on those two 8-pins, then the pattern would match your 24-pin color pattern. 26:42 to see what I mean
@youngbucc4173
4 жыл бұрын
"Stay hard, play silent" -bitwit
@mariodelrio2387
3 жыл бұрын
Lol
@poguemathone
4 жыл бұрын
Every time an AIO rad is installed incorrectly Steve dies a little inside.
@turin5675
4 жыл бұрын
Most of us do...
@thezombieslayer5767
4 жыл бұрын
Imagine being this guy with tons of expensive parts at his disposal
@Joker-no1fz
4 жыл бұрын
x570 tomahawk only in stock from scalpers almost all the time annoying. i just bought an open box x570 asus tuf for $130 instead.
@ionseven
4 жыл бұрын
Though Kyle is pretty much on the level, it's why most hw youtubers cater to companies vs having real honesty about products. KZitemrs are mostly just marketing extensions.
@gametests
4 жыл бұрын
Even "Obama says go to children hospital and pay the bills." Check it on ma channel before it's recommended after 10 years! :)
@Grevlain
4 жыл бұрын
That's his job. Bartenders have access to a couple hundred thousand dollars worth of booze. Gun shop owners are surrounded with pew pew's. Its a part of the job.
@trueminecraftfacts
4 жыл бұрын
@@Joker-no1fz The X570 Tomahawk is also very expensive.
@JohnnyTheFlash_
4 жыл бұрын
Hey thats my motherboard! Built my first system with it around 2 months ago. Works like a dream in my PC with my Ryzen 7 3700X
@guillaumejoop6437
4 жыл бұрын
The RGB problem is why you stick with one or two ecosystem at most. My pick is Corsair for RAM/fan and whatever manufacturer you can match GPU/MoBo
@niruh__2595
4 жыл бұрын
Every tech guru the past few days: "The rad should be flipped, it ruins the longevity of the aio" Me: But it looks SOOO much better. Kyle: *Justifies my decision*
@bepbep7418
4 жыл бұрын
Kyle: "Damn you Borge Madsen" You just googled that didn't you?
@Revolve-Studios
4 жыл бұрын
Just what we needed, Kyle the MVP!
@daghostds
4 жыл бұрын
AIO tubing should be down if you set it on front, air bubble goes up so directly at the tubing intake which could cause noise. At least it's better than putting it at the bottom of the case where it could damage the pump.
@awilliams1701
4 жыл бұрын
Me: wait...dairy queen makes PSUs? Bitwit: reminds me of dairy queen. lol
@fakename2553
4 жыл бұрын
15:40 Kyle looking like a tank
@i2410i
4 жыл бұрын
I’m honestly horrified to the point where I may buy a next gen console instead of building a pc. I know all the ups and downs between both and how PC is a no brainer, but with all the information being thrown at me about the new GPU’s.. what’s compatible, what’s not, what’s future proofed, what’s not. And the fact I don’t even have a monitor/peripherals. I don’t know what to do. I have enough to money as a higher school to start buying my parts but I’m too scared to buy everything one at a time. I also need WiFi with my build. Could anyone help me out???
@DenLim123
4 жыл бұрын
The red color and the x on the fans looking so sick 😍
@jbagandalf1
4 жыл бұрын
The bag in the aio expands. Your thermal paste application was crazy. You left the plastics on the m.2 drive and heat sync. Are you trying to mess with our ocd?
@SuperJbohn
4 жыл бұрын
Looking for obligatory "AIO is mounted wrong comment".
@Kabraxiss
4 жыл бұрын
PC Jesus says tubes go down
@SuperJbohn
4 жыл бұрын
@@Kabraxiss yes finally found one.
@Blaze-nc2nh
3 жыл бұрын
This guy is fooling every single one of his fans now they all are gonna have noisy air pocketed radiators in the next few years
@AFlyingSwive
3 жыл бұрын
as pc Jesus said it's better to have the rad pipes down if you can he couldn't have the pipes down in this case
@Smedleydog1
3 жыл бұрын
As long as the pump isn't the high spot of the system, it doesn't matter that the lines are on the top of the rad according to Jay's Two Cents.
@labtechs623
4 жыл бұрын
"I dont wanna talk about GPUS, So I'm gonna build a pc that is like 2000$!" Me: *cries* *Edit: I didn't know like 5 people wwould reply, thanks!*
@maddog2010p
4 жыл бұрын
do what i did, slowly buy pc parts and stock them away make a list of parts you want and buy them one piece at a time its how i ended up with a 3900x system
@bachkhoi9450
4 жыл бұрын
@@maddog2010p same with me
@wabsterino
4 жыл бұрын
@@maddog2010p works for me as well, this is soooooo much better than having an overall budget and have to compromise on other parts.
@teodjuyg56
4 жыл бұрын
@@wabsterino same, my limit is $1,200 overall and minus it every time I buy a part
@markjencymalero7062
4 жыл бұрын
this build is my favorite i hope this get noticed
@christophertomes6777
4 жыл бұрын
that front grill looks like it could of been a massive heatsink! its cool
@JacobCross2006
4 жыл бұрын
Hey Kyle could you give me some tips on a £500 pc with a 3400g in it thx. Love ur vids ♥️ You made me really crinkle in pain when you dropped that cpu out the package 😂
@vihaandas4346
4 жыл бұрын
He went full LINUS MODE
@JacobCross2006
4 жыл бұрын
@@vihaandas4346 😂😂👌
@wulv7075
4 жыл бұрын
@@JacobCross2006 😂👌 u buggin
@ryanhall8770
4 жыл бұрын
What kind of tips, like what other parts to put in?
@JacobCross2006
4 жыл бұрын
@@ryanhall8770 well I got a 3400g now and I got £500 and I'm wondering what are the best parts for it I don't really mind a pc without a gpu doesn't really bother me
@GojiHusky
4 жыл бұрын
Challenge: Build with only MSI parts and where theres no MSI theres Corsair parts! 🐉 🛳
@eatmyfard4382
4 жыл бұрын
Imma build my pc with travis scott meal
@abood-2639
4 жыл бұрын
I actually like this idea, for me personally I like this brand choice
@mikenikeeater3529
4 жыл бұрын
like so its top comment
@SuperSilvi1990
4 жыл бұрын
Motherboard, GPU, aio, monitor, all msi. Everything else corsair chair, case, fans, keyboard, ram, power supply and storage. No Cpu though :(
@eatmyfard4382
4 жыл бұрын
@@SuperSilvi1990 msi cpu imagine? Dragon 5 Fire10
@tauseefsalam5724
4 жыл бұрын
7:11, is no one gonna talk about how he applied the thermal paste?
@ITRSammy
4 жыл бұрын
Super nice build. Looks good with those rams. Those fans are badass also
@jpchaudhary5243
4 жыл бұрын
I love the way how you throw and play with the things I can't think to afford.
@kurkkumopo8973
4 жыл бұрын
this man just builds pc's for a living
@Nabee_H
4 жыл бұрын
People saying he forgot to peel off the sticker no he didn't, many KZitemrs do the same because right after they disassemble the pc and no it won't break the ssd if you leave it on for only a few hours
@BrendanCBreen
4 жыл бұрын
Every third comment is someone harping on that believing they're clever for catching it, but not clever enough to catch that he literally said that he wouldn't use that memory in an "actual build"...
@reed7102
4 жыл бұрын
Lmao his freaking ryzen 7 cost the price of my poop laptop
@kugelschreiber5678
4 жыл бұрын
I used that same AIO for my 1st build recently, the white variant. It is FANTASTIC. I don't even bother much with checking temps as I don't bother with overclocking anyway, and my PC usually runs real cool. Plus, it looks great, especially in white ;)
@saitarun8074
4 жыл бұрын
Thanks for the video Kyle . Much needed break for you .
@NikhilTalksTech
4 жыл бұрын
Kyle : I need a break from GPU talk. Let's build a PC Me : In the middle of uploading a risitas 3080 meme to my channel KZitem notis is so weird lol And btw, thanks Kyle for something that deviates our mind from that terrible rtx 3080 launch
@ahanafhoque8454
4 жыл бұрын
How is it terrible?
@rehiir
4 жыл бұрын
@@ahanafhoque8454 terrible as in sold out within seconds, tons of bots and scalpers, barely anyone getting them
@NikhilTalksTech
4 жыл бұрын
@@rehiir Yeah
@natevirtual
4 жыл бұрын
I've always loved your content. That said, please Kyle, for the love of God, get a gopro helmet! Either that or have someone else hold the camera! Can't stand the shaky camera, and grabbing everything one-handed, it's becoming unbearable to watch. I mean it for good. Peace.
@nayolin_8749
4 жыл бұрын
whoever likes this comment thinks lyle should do an asmr video
@issacehowardjr679
4 жыл бұрын
Was that a plastic tab still attached to that 1st M.2 you mounted there? O.o
@iamc24
4 жыл бұрын
12:04 I have that blue screwdriver as well as a red one. The top screws off and the other bits are stored inside. It's really handy, especially for portability. Also at 13:35, USB 3.1 Gen 2 = 3.2 Gen 2. I don't know if he made a mistake, or if he meant 3.2 Gen 2x2.
@nathanpickering6742
4 жыл бұрын
Ayy I'm building my first PC tomorrow! Never built one before, just had an Alienware prebuilt, so wish me luck. Finally got all my parts in so I'm pretty eager to get it all setup.
@jstudrawa
4 жыл бұрын
Putting the CPU pins down on a messy desk like that... such a good idea :)
Пікірлер: 2,3 М.