See our videos early with channel membership! kzitem.info/rock/z1KUoUoIlVIzWj21NQj0zgjoin
@davidsnyder238
2 күн бұрын
Having built two of these and still flying my original I have two recommendations for your owner. That's a great setup your using overall, the first recommendation is prop up to 22x10. 20 will fly it scale, 22 gives it a little better performance without a large penalty in wattage. I didn't notice any difference in flight time. Second , The elevator has some up trim in it, I had a ruler across the top of mine and it was flat across the top for tge elevator adjustment. Im sure you are aware but as someone who has been flying one of these for multiple seasons I thought you might appreciate the reminder 😊. This plane is a gentle giant and will utterly take off in 50' full flap and land in a 100 the same way. Looking forward to your usual master class in build and construction. Hope your well my friend.
@thelightersideofrc
13 сағат бұрын
Thanks David! Great info!
@Axr24have
2 күн бұрын
Another good vid Jon. I’ll be honest, prop planes are more my interest. And, i appreciate you starting a new build as though your viewers haven’t seen what you do - step 1, 2….. etc.
@thelightersideofrc
13 сағат бұрын
Thank you for saying that! I have to constantly remind myself that most haven't seen most of my videos. makes things repetitive on my end by I enjoy the process!
@barrywinslow9798
2 күн бұрын
Beautiful.......well done folks. Thank you, and God bless
@thelightersideofrc
13 сағат бұрын
Thank you too!
@thomasfluckiger750
8 сағат бұрын
Would be an awesome plane for a dual x45tp setup😍
@jattle
2 күн бұрын
I have that Bronco, too. I would suggest (what I have done afterwards) is replacing the stock ball heads to some high quality ones, like gabriel or something. And for those who have not begun yet, also replace the hinges for better ones.
@thelightersideofrc
13 сағат бұрын
😎
@thomasfischer4380
2 күн бұрын
Have fun to Route the felt 500 Meter wires and 50 connectors. . 😅. But the last thing you need on this plane is a gyro. This thing flies like an oversized beginner Airplane
@superskullmaster
2 күн бұрын
But this one is probably much heavier due to the rivets and fiberglass additions ect.
@echosmoke
2 күн бұрын
@@superskullmaster its actually not much heavier than the original the fiberglassing is 3/4 ounce cloth and the rivets are vinyl and the paint is water based
@thomasfischer4380
Күн бұрын
@@superskullmaster i dont think it will be much heavier. That printed vinyl wrap weights a lot. No compare to Oracover or Ultracote
@thelightersideofrc
13 сағат бұрын
Agreed but no downside to adding it into the aircraft. The owner can fly it on a windy day and the aircraft will look like it's flying in Zero Wind.
@kazama6245
2 күн бұрын
Wow! That looks great!!
@thelightersideofrc
13 сағат бұрын
Turned out soooo nice!
@jrmotorsports5532
14 сағат бұрын
Beautiful scale work.
@thelightersideofrc
12 сағат бұрын
Joe did a stand up job! Looks so good!
@TheFurreid
2 күн бұрын
iconic aircraft!
@thelightersideofrc
13 сағат бұрын
😎
@danahearn656
2 күн бұрын
I’ve got 1500 full scale OV hrs in the logbook to include this BuNo!
@thelightersideofrc
12 сағат бұрын
🤔
@tdogrc
Күн бұрын
Sat here with my morning Americano enjoying your videos as always. Great job Jonathan thanks 👍🏻
@thelightersideofrc
12 сағат бұрын
Thanks for watching!
@Frank-uq1wl
2 күн бұрын
Another hint: Maybe you try the ToolkitRC ST8 for your "burn in" process. It has four servo ports and some analysis capabilities. I think it would be more efficient and reliable. 😉☺️
@thelightersideofrc
12 сағат бұрын
I have one of the tool kit things. Haven't bothered using it for servo cycle process.
@Frank-uq1wl
12 сағат бұрын
@@thelightersideofrc I tried it last week and it works fine
@RTD1947
2 күн бұрын
How are the Pilots integrated into the programming...do they need function assignments..? Great video...love the details of what products you use and brands...and why....your building procedures and rational are "Bang On"!
@thelightersideofrc
13 сағат бұрын
In order to have control then need a function assignment. You could just plug the randomizer into an open port and they will always be on but better to have logic and control over when they are on. So in this case we will assign them to a function and program them to move with Gear down and flaps off or full type thing.
@ramonmedina1974
2 күн бұрын
finally! Yessss!!
@thelightersideofrc
13 сағат бұрын
😂😎
@LUKAS-BERKA
12 сағат бұрын
Hi, can i ask you what joystick ends do you have ? I really like them 😀
@thelightersideofrc
9 сағат бұрын
They are radio master ends! Very pokey and grippy!
@MsPokey1234
2 күн бұрын
Another Great Video!
@thelightersideofrc
13 сағат бұрын
Thank you Dean!
@medscott2
2 күн бұрын
Jonathan could I get the link to where the owner got his batteries from please. And I also own the Hangar9 OV-10 and it is by far my best and favorite plane. Cant wait to see how you put it together.
@thelightersideofrc
13 сағат бұрын
I'll see if possible.
@medscott2
12 сағат бұрын
@@thelightersideofrc thanks you I appreciate it I know you are a busy man.
@williamb.9110
2 күн бұрын
Nez is a blast LOL
@thelightersideofrc
13 сағат бұрын
Makes me laugh!
@williamb.9110
12 сағат бұрын
@@thelightersideofrc She was definitely a fighter pilot in a previous life :-)
@thelightersideofrc
12 сағат бұрын
🤣🤣
@flyboywbl
2 күн бұрын
RC geek showed me you can use wood glue for hinges. Have not had a failure yet. Super easy and it cleans up with water
@thelightersideofrc
12 сағат бұрын
Very cool Suggestion! Thank you!
@flyboywbl
12 сағат бұрын
@@thelightersideofrc yep. Did my 1/4 scale Balsa D7 with wood glue and 1/5 scale FW-190. They have both held up well. Not sure I would try it on a composite jet, but into wood wings it makes life easier.
@Sluf7
7 күн бұрын
Dam that's a lot bigger than it looks.😅 Yeah have had 3 servo,s in burn in fail so far all in the last 2 years😮😢. At least ya got plenty of room.❤ Good lot of work completed and nice easy fitting. 😅 Looking forward to the rest of build. Nice to see Nez keeping a handle on quality control.😂 Keep at it.😅
@thelightersideofrc
7 күн бұрын
Fully assembled it's pretty nuts! Such an ugly but cool plane!
@austinpelser472
2 күн бұрын
Jonathan i think this is the fist time I'm seeing you do an electric bird and I've been a sub for a while🤣🤣🤣🤣 .....do you actually fly electric or are you jetted out
@thelightersideofrc
13 сағат бұрын
LOL. Thanks Austin. I enjoy flying anything but if I have a choice, Turbines win. Most other things don't give me the tingles.
@MarkRenn
2 күн бұрын
Do they make systems where you could do this programming through a computer (keyboard and mouse) instead of through the remote? It seems like doing it through the remote gets REALLY tedious.
@thelightersideofrc
12 сағат бұрын
I don't think so. The Radio is simple and logical once you have done it a few times.
@superskullmaster
2 күн бұрын
Why go thru all that trouble for scale with rivets and all that just to chose a 2 blade prop?
@Captndarty
2 күн бұрын
And for a plain ugly scheme. I get sentimentality, but that’s a lot of effort for something that does not look that good.
@echosmoke
2 күн бұрын
@@Captndarty are you talking about the aircraft itself or the refinishing
@jeremygilbert3005
Күн бұрын
Fot scale 3 blade prop size you need a gear to keep the weight in a controllqble area. I will to this to mine this winter, scale size is 23".
@thelightersideofrc
13 сағат бұрын
LOL. incase you haven't heard, props can be changed!
@pilotmalc3432
Күн бұрын
Not sure if anyone's mentioned it earlier but the metal coming off the lights isn't called heat SHRINK, it's called heat SINK. Did make me laugh... 🙂
@thelightersideofrc
12 сағат бұрын
Yes i'm aware. Sometimes when your working, videoing and going through the process the words don't come out right. 😎
@jeffjackson6358
Күн бұрын
Was there a specific Unilight kit you used?
@thelightersideofrc
12 сағат бұрын
Yes the OV-10 Bronco kit. 1/5th scale I believe.
@blankblank9117
2 күн бұрын
I'm looking forward to this one!!!
@thelightersideofrc
12 сағат бұрын
Thanks!
@ABDULLAH-789-h2d
Күн бұрын
nice.what engines will you be using?and do you know the full scale bronco can do loops?saw that at they ar show here in not snowy like canada but unforunately rainy scotland.the bronco kept on looping.i forgot if it did aileron rolls though
@ABDULLAH-789-h2d
Күн бұрын
wait,its electric?electric is nice,although i think glow would be better.
@thelightersideofrc
12 сағат бұрын
Covered in the video. GLOW????? HECK NO!!!!
@antonyarnanova
2 күн бұрын
You lost me an electric….
@Captndarty
2 күн бұрын
Good, go get lost
@thelightersideofrc
12 сағат бұрын
Ciao!✋
@cymaz100
2 күн бұрын
do you get any paint to overpaint the horns an servo arms?
Пікірлер: 73