Damn dude, you went hardcore on this!!! Amazing job! You gave yours the full Threezero treatment, I love it!
@HobbieswithJose
2 жыл бұрын
Oh dude, thank you so much for checking it out man! I immensely appreciate it! 👍🏼
@Musclecarsunltd
2 жыл бұрын
You ask me it’s Hella better than ThreeZero
@HobbieswithJose
2 жыл бұрын
😁👍🏼
@Musclecarsunltd
2 жыл бұрын
@@HobbieswithJose Your so awesome I’ve watched a lot of your vids in the past week as I just started watching your channel I really enjoy seeing you customize the transformers as I need to customize mine, especially SS-72 starscream and SS-05 Optimus Prime
@HobbieswithJose
2 жыл бұрын
Hey, thank you much! I really appreciate that! Hope you have a great experience in your customizing journey too! 👍🏼
@Daryphe
7 ай бұрын
Those series were relaxing,instructive and motivational. Thanks for your good vibes,too.
@HobbieswithJose
7 ай бұрын
Thank you so much for your kind words, I do appreciate! Glad you've enjoyed this videos! 👍🏼
@GreninjaGamer25
2 жыл бұрын
And I thought this figure was good just out of the box, I didn’t know it could get better.
@HobbieswithJose
2 жыл бұрын
Always amazing how far a little paint and weathering goes. 👍🏼
@activisteady3451
Жыл бұрын
But he did make it worst by getting rid of all the pieces to make it transform even tho we didn’t see Soundwave transform
@ChanHo_LeeSMM
2 жыл бұрын
Omg! This Soundwave figure with custom paint is so gorgeous!! Keeping work, man!
@HobbieswithJose
2 жыл бұрын
Thank you so much! I appreciate it! 😁👍🏼
@RamseyLEL
Жыл бұрын
I've been wanting to customize some transformers for a bit now but have had alot of hesitation with how to paint them properly. Thanks for giving a great tutorial on how to prep, paint, ans customize!!!
@HobbieswithJose
Жыл бұрын
Hey, thank you so much! It’s always a learning experience and I’m happy to put my process out there. Certainly wish you the best of luck! 😊👍🏼
@novermbergamer4787
2 жыл бұрын
ME GRIMLOCK IS NEXT!!!! (Don't forget his front teeth). That soundwave is beautiful, so good and so much better, you done a great job, jose. Can't wait to see how you grimlock, keep up the work, jose.
@HobbieswithJose
2 жыл бұрын
Thank you so much November! And no worries, I do have DNA kit on order for Grimlock. 😁👍🏼
@shaggydog7314
2 жыл бұрын
I love seeing people with with the same interest as me. The fact that you tore everything down and tackled it piece by piece to get the best finished product is great. For me the panel line painting adds more depth to it. I'll have to watch the video again to find out what paint it was because the black looked a lot thinner. Everything was great from the videos to the paint and the materials you used. Awesome!
@HobbieswithJose
2 жыл бұрын
Thank you so much Shaggy Dog, I do appreciate that! I believe I more than likely used Tamiya Panel Liner, but you’ll be happy to know that in my newer videos I list affiliate links to all the tools I use. Hey, thanks for watching! 👍🏼
@GCstudios5.9.23
2 жыл бұрын
Beautiful as always
@HobbieswithJose
2 жыл бұрын
Thank you GrayCat! 👍🏼
@tristanh5270
2 жыл бұрын
top tier work
@HobbieswithJose
2 жыл бұрын
Thanks Tristan! 😁👍🏼
@johndejac73
2 жыл бұрын
Great looking piece!
@HobbieswithJose
2 жыл бұрын
Thanks! 😊👍🏼
@Master.SUPERIOR_TF
2 жыл бұрын
VERY VERY GOOD
@HobbieswithJose
2 жыл бұрын
Thank you! 😁👍🏼
@optimusdaddy7739
2 жыл бұрын
Looks great
@HobbieswithJose
2 жыл бұрын
Thanks! 👍🏼
@williamhays7356
Жыл бұрын
Amazing! I am just getting into customizations/repaints and really look to customizers such as yourself for tips and inspiration.
@HobbieswithJose
Жыл бұрын
Glad you found me! Hope my videos come in handy. 😁👍🏼
@FastforwardxD
2 жыл бұрын
This looks as good as the $200+ threezero deluxe version!!! Also OH MY GOODNESS I WOULD LOVE TO SEE YOU GO OFF WITH SS86 GRIMLOCK REPAINT! I have a feeling you'd paint his gold parts with a metallic gold finish to give off a chrome look super excited!
@HobbieswithJose
2 жыл бұрын
Thank you so much FastForward! I’m certainly happy with the results and can’t WAIT to start on Grimlock! I’m gonna need a lot of paint for him, lol. 😅👍🏼
@mortcraft23
2 жыл бұрын
Sorry I couldn't make it for the premiere but he looks awesome bro!
@HobbieswithJose
2 жыл бұрын
I just want you to know I cried myself to sleep that night…lol. For real though, I’m glad you caught it afterwards. Thanks man! 😁👍🏼
@Unknown-yf6lf
2 жыл бұрын
Woah That Looks Awsome I Wanna Be Like You When I Grow Up!
@HobbieswithJose
2 жыл бұрын
Thank you so much! 😊👍🏼
@dawoodmarion
2 жыл бұрын
Great video!!! Looking forward to you growing this channel. This is really great content and I agree this version of soundwave is super cool. Thanks!
@HobbieswithJose
2 жыл бұрын
Thank you so much! I really appreciate the kind words. And hey, you’ve got a FANTASTIC channel yourself! Great content and I’m really enjoying it! 👍🏼
@dawoodmarion
2 жыл бұрын
@@HobbieswithJose Awesome!! I sent. you an email.
@sacni1106
2 жыл бұрын
Looks awesome!! I like your work and the other videos Jose
@HobbieswithJose
2 жыл бұрын
Thank you so much! Glad you enjoy them! 😊👍🏼
@derek2888
2 жыл бұрын
The end result is fantastic, good job Jose
@HobbieswithJose
2 жыл бұрын
Thank you Derek! 👍🏼
@_Blu__
2 жыл бұрын
Watching these videos make me want to have a collection, display of repainted transformers
@HobbieswithJose
2 жыл бұрын
Never too late to start painting. And thanks for watching Blu! 😊👍🏼
@_Blu__
2 жыл бұрын
@@HobbieswithJose I'm gonna have to put that in my buck list for now
@Mike-mf3ed
2 жыл бұрын
When the ground rumbled at the end of the video, I thought it was studio series Devastator…
@HobbieswithJose
2 жыл бұрын
Lol, sorry to disappoint!
@Mike-mf3ed
2 жыл бұрын
@@HobbieswithJose nah, it’s ok… it’s simply the personal preference instinct thing where you expect others to like/show or do something just because you like it.
@HobbieswithJose
2 жыл бұрын
That’s certainly true. Hopefully SS Grimlock will be just as enjoyable. 😊👍🏼
@domls1317
10 ай бұрын
Why does "Lilac Skies" remind me so much of "Back to Life" by Hailee Steinfeld?
@HobbieswithJose
10 ай бұрын
Now that you mention it, I definitely hear it. Maybe that's why I picked it, lol.
@ag_lag2349
2 жыл бұрын
epic
@HobbieswithJose
2 жыл бұрын
😁👍🏼
@wilsonleoheartvn
2 жыл бұрын
Repaint soundwave netflix some another time, plz :)
@HobbieswithJose
2 жыл бұрын
That’s certainly the plan. 😁👍🏼
@Danalysis
2 жыл бұрын
Relatively new to customizing, and I'd like to know what tools and paints are best for painting? Good to get tips from some of the best ;) Also any tips or secrets on the procedure would be much appreciated.
@HobbieswithJose
2 жыл бұрын
Hi there Soundwave. For brushes I think a good variety helps. Small ones for finer details and bigger, flatter ones for larger areas. One tip I say is try starting with a figure you don’t mind ruining so you can practice and improve your skills. I keep no secrets though, most of my process I lay out in my videos. Thanks for watching and best of luck! 😊👍🏼
@Danalysis
2 жыл бұрын
@@HobbieswithJose Thanks man for the advice! will keep it in mind!
@raicruz8199
2 жыл бұрын
I like your videos on you tube
@HobbieswithJose
2 жыл бұрын
Thanks for joining the premiere Rai! 👍🏼
@raicruz8199
Жыл бұрын
How are you
@raicruz8199
Жыл бұрын
I really loved the wheeljack video that was my favorite one
@raicruz8199
Жыл бұрын
@@HobbieswithJose how are you doing today and what next custom are you going to do next week
@raicruz8199
Жыл бұрын
How is your day today going like what kind of custom are you going to this weekend
@MtgamingYT2005
2 жыл бұрын
Hey jose, a you know how to get out these wide pins? My siege spinisters foot- leg connection broke and im pretty sure i could screw it back together if i got out the wide pin. But its stuck. I even chipped of part of the plastic its in so i could get a screwdriver under it and try to lever it out, but i think my screwdriver would rather snap in half than get it out. Any suggestions?
@HobbieswithJose
2 жыл бұрын
Oof, sadly no. I know there’s a method of using a soldering iron to get out wide pins but I haven’t been able to use it myself so I’m general I leave them alone. Wish you luck though! 👍🏼
@kylekaufman253
2 жыл бұрын
Hey, question. Idk if you tale video recommendations, but if youdo, do you think you could make a video of customizing one of the Cybertronian Seekers (maybe Thrust, specifically) into a Cybertronian version of Blitzwing?
@HobbieswithJose
2 жыл бұрын
Although my lineup is pretty much set I do listen to suggestions. And I HAVE thought about a Cybertronian Seeker custom, though I probably wouldn’t make another Blitzwing. But you never know, lol. Thanks for watching Kyle! 😁👍🏼
@elgmac73
2 жыл бұрын
@@HobbieswithJose May I suggest turning any Siege seeker into Skywarp since his pricing point is too rich for my blood
@HobbieswithJose
2 жыл бұрын
Yeah, I’ve certainly thought of that. It’s an option I’ll keep open. 👍🏼
@spideyawesome6498
2 жыл бұрын
I have a question. When you're done painting your characters, are they still transformable or does the paint chip when you try to transform them? I'm curious for any customizations I may have.
@HobbieswithJose
2 жыл бұрын
Really depends on the project. On most SS figures I’ve removed the kibble for a cleaner bot mode with no more transformation, but I’ve kept it on ER Prime and Siege Megatron with no paint chipping thankfully. Thanks for watching Spidey! 👍🏼
@napalmdex440
2 жыл бұрын
Are you still needing Ravage man? They have a ton here. Let me know I'll hook you up
@HobbieswithJose
2 жыл бұрын
Thank you so much Dex! I actually have my BBTS order coming in today so I should be good. Really appreciate it though! 😁👍🏼
@napalmdex440
2 жыл бұрын
@@HobbieswithJose no prob man thought I'd offer. Did he come in? I love this Combo personally even if SW's alt mode is a bit... Meh.
@HobbieswithJose
2 жыл бұрын
He certainly did and he looks great! Alt mode is as unimpressive as Soundwave’s but I honestly can’t wait to give him a new paint job, lol.
@raicruz8199
2 жыл бұрын
You should get transformers studio series raveg
@HobbieswithJose
2 жыл бұрын
I’ve been trying! Lol. 🥲👍🏼
@Lybra338
2 жыл бұрын
Yes it looks good but i honestly expected something more exciting than a repainted battle scarred version. Do people not do custom transformers?
@kylekaufman253
2 жыл бұрын
Do you think you could repaint TLK Nitro Zeus, or maybe TLK Optimus Prime, but could you *please, please* if you're able to, paint the flames on him? Every other single customizing TLK Optimus Prime, the people have *always* had sticker flames, and it's so annoying!
@HobbieswithJose
2 жыл бұрын
Aw man, I’d love to but I’m mostly sticking to BB movie SS and mainline figures. But you never know what the future holds. Thanks for watching Kyle, I do appreciate it! 😁👍🏼
@user-er4ez4di4m
2 жыл бұрын
I wonder if you sell any of your customs.
@HobbieswithJose
2 жыл бұрын
No, not really. Not yet anyway, lol.
@Danalysis
2 жыл бұрын
Just a quick question, what are your opinions on spray paint? is it similar to airbrushing or what?
@HobbieswithJose
2 жыл бұрын
I’d say similar but by no means the same. Airbrushing gives you more control over the flow of the paint whereas a rattle can is just “on” or “off.” I still stick with spray cans for many projects though. 👍🏼
@Danalysis
2 жыл бұрын
@@HobbieswithJose Just another question, how long does it take to get a pit out? I've been trying to get them out and I've barely made any progress
@HobbieswithJose
2 жыл бұрын
A pin? Not long at all! No more than a few seconds of hammering is enough to judge it out. Are you using a punch pin?
@Danalysis
2 жыл бұрын
@@HobbieswithJose oh whoops, i just realised that i was doing it wrong! 😅 I know to to do it properly now!
@HobbieswithJose
2 жыл бұрын
Glad I could help! 😁👍🏼
@hebiweaponsguy4842
2 жыл бұрын
How long did it take u to put it back together?
@HobbieswithJose
2 жыл бұрын
Not too long, maybe 30 minutes. I only showed the chest assembly since it was the most interesting, but everything else went super smooth. Thanks for watching! 👍🏼
@hebiweaponsguy4842
2 жыл бұрын
@@HobbieswithJose alr
@GCstudios5.9.23
2 жыл бұрын
Wait I have one question. What primer do you use, because I paint my figures with enamel and acrylic based enamel out of a spray can, because we don’t have enamel paint where I live, so I just want to know which is safe and compatible with the paint I use.
@HobbieswithJose
2 жыл бұрын
Right now I’m using Alclad II Laquer primer and that stuff hasn’t let me down so far. And I also use enamel and acrylic from both rattle cans and brushed on. Haven’t had any issues so far. 👍🏼
@GCstudios5.9.23
2 жыл бұрын
@@HobbieswithJoseok thank you so much
@user-Lego985
4 ай бұрын
Hey why not add potable fingers huh 😅
@omegaraver7609
Жыл бұрын
Why does soundwave’s visor make him look sad
@HobbieswithJose
Жыл бұрын
It really does. 😅
@rameybutler-hm7nx
26 күн бұрын
Meh its good but i prefer o.g style
@MrMessanger
11 ай бұрын
Man I have watched a couple of your things you paint and what is the point you might change like 3 things on it and the rest is just about the same color as you started with it would cut your videos down from a waste of watching if you just painted certain things that are a different color, seriously kinda a waste of time
Пікірлер: 104