Your sound is muffled in and out. This makes it hard to understand you at 100%
@ShanthonyWays
2 жыл бұрын
Beautiful work. I will try to this. Thank you so much
@spyrorocks346
2 жыл бұрын
Hi Shanthony thank you yes definitely try it the effects really come out super cool so glad you enjoy thanks for watching Smoochez
@Alabamamobileweb
8 ай бұрын
Did you heat press for 20 seconds with shiny side of the vinyl up or down?
@spyrorocks346
8 ай бұрын
Yes I did press for 20 second or shiny side up so the heat plate can touch the lamination. Thank you so much for watching.
@bear9419
Ай бұрын
What do I do if I don’t want my image to peel off?
@nikkijarvis4644
16 күн бұрын
You can run it under water and wash it off. 😊
@EzzyDT
2 жыл бұрын
Have you tried it with a porous tile? It maybe permanent.
@TheDwilliams1000
2 жыл бұрын
Why does the laminate come off though? I've tried it and it just peeled off. Do I supposed to wait til the laminate cools down after sublimation?
@LanceMcGrew
5 ай бұрын
thermal laminate does not stick well. Use clear outdoor permanent vinyl for best results. Oracal 651 best.
@nicolesalmon4583
2 жыл бұрын
Hi Gloria. Thanks for sharing. I would love to see it with the polysilicon. Looking forward to that video.
@spyrorocks346
2 жыл бұрын
Hi Nicole thank you for watching yes I would definitely try that just to see if it works I’ve been hearing about it so let’s test it out soon thank you so much for watching Smoochez
@vickiewray9816
10 ай бұрын
at what temp do you heat the lamination to the tile?
@LanceMcGrew
5 ай бұрын
wondered same thing - detail was left out best I can determine. Also details about putting tile on top of artwork during heat press. How much time under the heat press for sublimation? Lots missing.
@deloresblackburn4616
Жыл бұрын
Can you tell me if your tile was glazed or unglazed? Thank you
@spyrorocks346
Жыл бұрын
Hi Dolores, no it is not glaze if I can recall this video. I’ve done it with lamination sheets and I was just using them as decoration. You can peel it off and put another design later. Thank you so much for watching.
@Alabamamobileweb
8 ай бұрын
From the looks of the tile I would say they were glazed tile.
@denisegilmer915
Жыл бұрын
Yes I would like the polyurethane or something to make it more permanent for selling or just giving it as a gift.
@spyrorocks346
Жыл бұрын
Hi Denise, if you would like something more permanent, you will have to get the coasters that are meant for sublimation, on the polyurethane. It’s all right but sometimes it don’t take it could be the user so if I was you test it out and try it. Thank you so much for watching.
@zootasplace7344
Жыл бұрын
@@spyrorocks346 um, it isn't Polyurethane that you use. If you use that, you will have a huge toxic mess! Polycrylic is what you want.
@zootasplace7344
Жыл бұрын
Polycrylic! Polyurethane is flamable.
@yooxldiyd
5 ай бұрын
Thank you for this. I have been trying to get my laminate sheets to stick
@YolandaRivas-s9k
Ай бұрын
Thank you I am going to try it
@littleloz2607
Жыл бұрын
Surely you should leave the tiles to cool because while the tiles are hot the colours will start to sublimate before putting back under the heat press 🤔
@candylps4179
2 жыл бұрын
That is really nice. What type of heat press are you using and how did you get the image on the sheets. And yes the poly silicon would be a yes.👍🏽😷
@nurseaprn97
Жыл бұрын
How long did you heat the tile to laminate the sheet to it? BTW the tiles are beautiful
@mamadubwize
Жыл бұрын
beautiful, can it hold the heat of a hot mug without messing up?
@QuietBreezie
Жыл бұрын
Thank you so much. I'm just starting sublimation & I did a tile & it did come out glossy now I see I have to use laminating paper.👍🏾
@jillianrobert9672
4 ай бұрын
Is it the same with the one we use to laminate paper (name card, etc)
@debbierachal8533
2 жыл бұрын
Yes please
@vikki92411
2 жыл бұрын
So cute 😊
@audreycooper2960
Жыл бұрын
hi there., can these be used as coasters . can a hot cup of tea be placed on it or will the laminate melt
@LanceMcGrew
5 ай бұрын
Does not melt but will cause the laminate to come loose and fall off. Use Oracal 651 vinyl for better results
@Jocetheangel888
2 жыл бұрын
Thank You so Much! yeah do the polycrilic
@spyrorocks346
2 жыл бұрын
You got it! thank you for watching.
@vikki92411
2 жыл бұрын
Does the polycrylic have to be cured in the oven?
@zootasplace7344
Жыл бұрын
No, you can let it dry in the air. Takes 24 to 48 hours depending on the thickness. The oven just helps it dry faster.
@Natural50lady
2 жыл бұрын
Very nice. Is there a way to avoid the tape marks on the images. Is the anything besides to put on back besides cork?
@yvonnepierce2913
Жыл бұрын
cut images bigger than tile and tape from back onto the paper. Full house Francis has a tutorial that i go by and they come out perfect.
385° 10 seconds for laminate then 385° - 400° 240-seconds for sublimation. Put tile face down on top of artwork.
@Cebubohol-wm6qo
Жыл бұрын
Virtually useless application if the laminate comes off that easily
@wayneberry3453
4 ай бұрын
Lmao wait for the glue to adhere, cut and print. How will it come off?
@MsSuperklutz
2 жыл бұрын
OMG Gloria....WOW Your Tiles turned out Spectacular...Gosh Girl you really came up with another Super Fun Idea and it was Super Fun Watching you Sublimate on your Ceramic Tiles....I too would love to see you sublimate using the polysilicon!! You sure did a Super Incredible Creative job!! You are so talented!! Again TFS this was so much fun !! YOU DO ROCK!! Joan Smith
Пікірлер: 48