Crazy attempts you have done there, even the super brake deteroriated and was unable to slow down the machine properly. Keep it up! You might even be able to break 1 second barrier!
@@user-yz1cy1ht7z I can understand thanks to the subtitle and Google Translate. And yes, this KZitemr tries any possible way to break the time barrier, even the weirdest ones like making different roller stays for left and right side of the bumpers.. When the words "3D data complete" is spoken, you know some fun things are about to happen; sometimes funny things as well.
@user-yz1cy1ht7z
Жыл бұрын
@@albertusaswin2012 Thank you for replying to my silly comment. Let's enjoy his next advanced and crazy challenge together!
@albertusaswin2012
Жыл бұрын
@@user-yz1cy1ht7z true. And no worries. I simply reply to whoever replies to me.
Thank you so much for the subs! This hobby is pretty much non existent in Brazil and I love to be able to engage in it by watching your videos! Keep up the great work
@UrologyFox
Жыл бұрын
ぶっ飛んだ発想で着実に結果を出していくスタイル…!
@azpaca0
Жыл бұрын
ありがとうございます! 今回の結果はかなり運要素が強かったので精進が必要です…!
@Better_Call_Bulba-Saur
Жыл бұрын
Thank you for such interesting, intelligent, and fun content! The english subtitles and the quirky presentation makes it really enjoyable even for a non-japanese speaker like me.
If this is truly “anything goes”, does that mean the car could have a microprocessor in it? A microprocessor with some sensors (a 3-axis accelerometer) and a simple motor speed control could accelerate the car in the straights and slow it down on the curves and especially the LC. I’m impressed by your creativity and 3D design skills!
@irvanray1898
Жыл бұрын
someone already does that whole microprocessor thing iirc, the added weight of the sensor and processor doesn't really improve the speed.
Your videos are so good that they might make me try these 4wd races at home... Currently in the process of trying my best to resist the urges 😅 P.s. I apologize in advance if there's some term for this that I missed.
@MangaGamified
Жыл бұрын
I suggest a 3D printer like this channel literally did. The "hobby" is extremely expensive nowadays cause of the IP like Tamiya, and you'll always be tempted to theorize and buy more. I have a cousin literally have this hobby, I think he said "I spend so much just to lose", I didn't press any further so I didn't know what he mean. At then he had sold everything. It's kinda a semi failsafe purchase, incase if u get tired or it's not for you, you can use it for other things like printing cellphone cases or chopsticks or printing toys.
@Yeelleeay
Жыл бұрын
@@MangaGamified I'm actually currently in the process of saving up for the components to make a 3D printer myself. Even tho it might be a bit more expensive it'd certainly be worth it and I having a 3D printer is always worth it no matter what you do :)
@user-yg7gn1dr3z
Жыл бұрын
凄い早さ!! ほぼミニ四駆らしい改造でここまで早くなるなんて、 いつか1秒台行けそうかも。
@user-rf7tn3vt4s
Жыл бұрын
身を削るような戦いはスゴいとしか言いようが無いです。
@TheLaXandro
Жыл бұрын
Such a simple toy, and yet such a fun engineering challenge.
@Nauxe
11 ай бұрын
ゲキドライブのご紹介ありがとうございました
@yoshinokazuyoshi
Жыл бұрын
記録更新で、一人で声出してた・・・楽しすぎる!!
@ginnganoheijousinn
Жыл бұрын
アズパカさんの悪魔でミニ四駆を貫き通す姿勢ほんと好きです。いつか来たる1秒台楽しみにしてます。
@LancelotChan
5 ай бұрын
I enjoy watching your videos so much, subscribed and liked!
@HK-sn6th
Жыл бұрын
とうとう2秒フラット台の戦いにwww
@masara092
Жыл бұрын
低摩擦タイヤがほぼ標準になってる現状だと4WDにこだわってる部分に利点がありそうなのも面白い
@shumshum1a0
Жыл бұрын
プロペラシャフトを左右どちらかに寄せればブレーキを長くできるからブレーキの効きを強められそう
@suama_chan
Жыл бұрын
すごい👏✨金ピカモーター強い! そして耐震ゲルがゼリーみたいで美味しそう😊❤
@alexandregrynagier1762
Жыл бұрын
Very impressive, congratulations!
@hilock702
Жыл бұрын
これはすごい!
@fpvwing
Жыл бұрын
Is the front wing pushing the front end down optimised? Looks to be limited to height of print but may help over LC.
I think the ramp should have fan / blowers blowing down so that down pressure of air hopefully makes sure the car stays on the track. IDK if it's tournament settings but in PH, we just put a cover on the ramp so it won't fly off.
Your side rollers should have rubber on them and have a downward tilt towards the front. Having wedge shapes instead of square shapes to all the forward facing parts might also help
Пікірлер: 425