Dude.... Wtf.... All these years I've just looked through the scope and it's NEVER occurred to me that you could use a flashlight to turn the reticle picture into almost like a projector on the wall. Simple yet brilliant... Thank you good sir!
@CultofRust
2 жыл бұрын
So glad this helped you out
@Dimitrius001
4 жыл бұрын
I align my reticles using a plumb line as well, though it never occurred to me to use a torch to show the reticle on a background. I've always just looked through the scope. Learn something new and useful everyday. Thanks!
@CultofRust
4 жыл бұрын
Thanks for watching
@whatstheproblem6606
3 жыл бұрын
Torch??? we callem flashlights here in USA, but I get it, you're across the pond 👍🏻
@johnmaxwell4131
3 жыл бұрын
That is simply genius.
@CultofRust
3 жыл бұрын
Thankyou so much
@billalumni7760
8 ай бұрын
Almost done. Now once everything is centered spin your elevation up and down to make sure the internals are aligned with the reticle. Windage is a bit trickier. Using a squared line on paper works. Having a true horizon is even better.
@rosswitte
2 ай бұрын
Outstanding!!! Mind blown how simple and how genius this is. Thank you!
@CultofRust
2 ай бұрын
Thankyou. Glad it helps
@andyadam3620
3 жыл бұрын
Hi Danny, i learnt this many years ago at an air rifle club, one tip for your viewers though, spirit levels can be way off ! to test a level put it on a flat surface and note the edge of the actual bubble then spin the level around and the edge of the bubble should be in exactly the same place....cheap levels tend to be way off i just bought ten cheap plastic bubbles (just the bubbles without the frame for this very purpose and only 1 was accurate..........just a wee tip
@andymorrison2945
3 жыл бұрын
Thanks Danny , absolutely fantastic tip.
@scottnj2503
2 жыл бұрын
The BEST! video about scope leveling on KZitem.
@CultofRust
2 жыл бұрын
thankyou. glad it helped
@tridoc99
3 жыл бұрын
Simple and elegant. Nice!
@stephenmurray5684
5 жыл бұрын
So easy & straightforward but I would never have thought of doing it. Thanks Danny
@CultofRust
5 жыл бұрын
Stephen Murray thanks buddy. Glad I could help a little
@CHIBA280CRV
2 жыл бұрын
I have to say that is a brilliant idea, thanks for sharing 👍👍👍👍👍
@user-fd6yj3ns6y
3 жыл бұрын
Absolutely brilliant. Thank you
@petemonceau5057
3 жыл бұрын
Thanks! Simple and accurate 👌
@BirdWhisperer46
3 жыл бұрын
Absolutely brilliant.
@payam7777777
3 жыл бұрын
Danny does things smartly.
@rjmprod
4 жыл бұрын
That was brilliant.....Thanks mate
@JasonNeal-wu3sj
7 ай бұрын
By beginning with a spirit level on the gun to level the gun itself, this flashlight approach will produce a proper reticle-to-bore alignment if and only if both the gun and the scope rings are mechanically perfect across about a half dozen potential sources of error. In other words, in most cases it will likely be better than eyeballing it but don't trust it to yield near-perfect alignment.
@dragonrider385
3 жыл бұрын
I just heard of this. Thank you for sharing .
@GlockmanGG
4 жыл бұрын
Thanks , great trick , thanks again for sharing this
@smokingcrab2290
Жыл бұрын
Best video on KZitem about this. Thank you so much bro.
@CultofRust
Жыл бұрын
so glad it helped you. thanks for the comment
@bobpattenden
5 жыл бұрын
Very clever trick, ive been HFT shooting for 10 years and this is the first time ive seen anything like this. My one criticism would be the stock is not the best place to take a level reading, I like to level from the breech area or the top of the scope rail. Thanks for showing me something new.
@CultofRust
5 жыл бұрын
i had previously adjusted stock and action so they were square. I added the caption about the clip on bubbles for this reason. thankyou for watching tho. and thankyou for the feedback
@Fallout777
3 жыл бұрын
Thank you, I never thought about doing that.
@markrhodes5474
3 ай бұрын
Brilliant 👍
@Flukey_1970
3 жыл бұрын
Cracking idea!
@carpathianwhips8345
4 жыл бұрын
brilliant thanks!
@fruitful7753
Жыл бұрын
Tighten the clamp screws while doing this to keep it aligned until tight.
@wm.traynor1143
3 ай бұрын
Clever👍👍😄😄
@TheBamayaker
3 жыл бұрын
Thanks! Great idea, everyone can’t afford all the fancy tools that are on most videos.
@CultofRust
3 жыл бұрын
Exactly. Thankyou
@RaymondMares
3 жыл бұрын
Yes. That is genius. Thank you!
@CultofRust
3 жыл бұрын
Thankyou
@abrad3061
3 жыл бұрын
Nice job !thanks
@newtownnaughtyboy8742
5 жыл бұрын
Nice one Dan, was a new one on me....
@ForceMultiplier
3 жыл бұрын
Well done. Migrate to America. Im sure you shoot as well as you level scopes. We could use ya coming up here before too long, more likely. Love from Texas & Arizona. Thanks for making me a little more lethal, without needing anything fancy.
@CultofRust
3 жыл бұрын
Thanks for watching and glad to help
@_SLAVEONE_
Жыл бұрын
Damn, I never thought of that. All these years I've been dicking around with multiple levels, tightening, checking the scope, untighten, relevel the scope, retighten, ect....
@CultofRust
Жыл бұрын
thankyou
@rooftopvoter3015
3 жыл бұрын
Sliding parallels work well also
@gaberaddo7664
3 жыл бұрын
Ahh interesting. Good video.
@FOOKYOUTUBENUMBERS
2 жыл бұрын
Best zeroing in vid by far thumbs up from me pal 👍
@CultofRust
2 жыл бұрын
thankyou
@mrsbunny5637
4 жыл бұрын
That is cool! Sending this vid to my husband.
@CultofRust
4 жыл бұрын
Thankyou
@teflondon4085
3 жыл бұрын
Genius!
@elmerfudd7674
2 жыл бұрын
You are assuming that where you placed the level is perfectly the same as the bore??
@antj211
4 жыл бұрын
Brilliant I say
@MrJames19676
2 жыл бұрын
Brilliant!
@CultofRust
Жыл бұрын
thankyou
@Baikal1971
3 ай бұрын
i think im going to need a proper gun vice
@randyscott990
Жыл бұрын
If your vertical reticle stadia line doesn’t pass through the center of the rifle bore it’s kind of a waste of time isn’t it. Otherwise you’re just guessing that barrel bore, gravity and reticle are aligned.
@1873saa
2 жыл бұрын
very good idea 💡, simple to implement, a question: how far do you place the scope from the sheet on the wall?. Thank you
@CultofRust
2 жыл бұрын
I just had it about a meter away. As long as the projected reticle is clear
@1873saa
2 жыл бұрын
@@CultofRust ok 👌
@ngirardo86
3 жыл бұрын
Spend $15 and buy the wheeler scope level kit and you're done in seconds. And you can donit to any gun anywhere.
@creampuff1947
2 жыл бұрын
Excellent BUT i guess we had to guess that you directed the torch/flashlight through the scope - I missed if you showed that or explained it
@CultofRust
2 жыл бұрын
Glad you enjoyed it. At 1.39 the caption says the torch shines through scope
@leroyb1876
3 жыл бұрын
Just found your channel and subscribed
@CultofRust
3 жыл бұрын
Awesome. Thankyou
@rancidpitts8243
3 жыл бұрын
Best KISs ( Keep It Simple stupid) ever on scope leveling.
@anaexe7010
2 жыл бұрын
Brilliant
@CultofRust
2 жыл бұрын
thankyou
@Mr85scooter
2 жыл бұрын
How do you accomplish this if your receiver doesn't have a flat spot for the spirit level? Most of my rifles do but some do not.
@CultofRust
2 жыл бұрын
I'd use a scope mount level in that case I guess
@xenomorph1317
2 жыл бұрын
The easiest and best way. Two birds with one stone 👌🏻
@CultofRust
4 ай бұрын
Thankyou
@haraldweiss8487
Жыл бұрын
Buy a Spuhr mount and the scope is leveled without adjusting. That’s the perfect and easiest way.
@markb9896
Ай бұрын
🤯
@peterdarlington4117
5 ай бұрын
Bro said all you need is a torch! I got super excited and brought in my oxygen acetylene rig my wife was like what are you doing with your torch in the kitchen? I said I don’t know I’ll tell you when the British guy tells me! Was super let down!!!!!!
@CultofRust
5 ай бұрын
I hope you managed to find a use for the torch until you get a "flashlight"
@PatGavinProductions
4 жыл бұрын
Goddamn brilliant.
@CultofRust
4 жыл бұрын
thankyou
@scrinja
Ай бұрын
You should of put the level on the action NOT the Woodwork Dude ?
@rupertguy2560
2 жыл бұрын
Thank You , short and to the point explanation.....the old KISS theory....keep it simple stupid....
@CultofRust
2 жыл бұрын
thankyou. glad it helped
@dirtnap5885
3 жыл бұрын
Pretty sure your scope was upside down? Christmas trees are on the bottom.
@CultofRust
3 жыл бұрын
Look about 1.08 viper logo up the right way... Because I'm going wrong way down scope it flips reticle
@johnfiore9390
3 ай бұрын
Plumb line to expensive just a bolt with some of nans wool😂
@CultofRust
3 ай бұрын
Hey if it works dude....gravity is still free lol
@johnfiore9390
3 ай бұрын
@CultofRust agreed ha 😆 🤣
@smiley847
3 жыл бұрын
Lol fuck me. I've struggled with this for years and you solved my conundrum in 2 minutes. Thank you
@CultofRust
3 жыл бұрын
Thankyou. So glad it was useful to you
@Workforaliving
2 ай бұрын
Very good. never seen it done that way before. be the perfect way to tune you scope bubble I will diffidently try it. Thank you
@CultofRust
2 ай бұрын
Thankyou
@daniellewis5413
Жыл бұрын
Crap tryed it wen you put gun to your shoulder its wonky ret coz no human shoulder is plum or straight !!
Пікірлер: 94