think ive found them on amazon Ryde Motorcycle Bar End Mirrors - Fits 22mm Motorbike Handlebars with 18mm Internal Diameter ordering now cheers matie
@grahamlimb182
7 жыл бұрын
rumpolegriff that's great, Enjoy 😁
@s1yess399
7 жыл бұрын
hi have u got a link wear i can buy the windbreaker protected guards around the levers plz
@reecebrookes3531
7 жыл бұрын
how did you do the tail tidy please and where did u get the parts from please
@grahamlimb182
7 жыл бұрын
Hi, I ordered the tail tidy from eBay, there are many to choose from, I had to take off all the back panels, the seat, I then unscrewed all the panels underneath. Once you strip all that away I unbolted the metal frame so all the back section where the number plate is comes away, I then cut that in half with a saw, from that point it's sorta clear how it all goes back together, the only thing to make sure you do the lights, unatach them from the old bit and they will fit straight on to the Tail Tidy. There are a few how to clips on KZitem but I figured it out myself. I hope this helps.
@rumpolegriff
7 жыл бұрын
what make are the mirrors matie im forty eight and shoulders like brick walls so have the same problem.made a bracket for frt L plate on the rhs of fork stem
@grahamlimb182
7 жыл бұрын
rumpolegriff ye the standard ones arnt good for big shouldered chaps are they, I'm not sure on make,however they are one of the cheapest things I've bought on eBay, I think they were about £4.99......they work a treat 😁
@rumpolegriff
7 жыл бұрын
Claymore101 thxs for replying I will start hunting lol
@Zjones55555
7 жыл бұрын
I want to modify my Sinnis Sp 125 exhaust, would the drilling holes method work for mine do you know? Thanks
@grahamlimb182
7 жыл бұрын
It depends on what your pipe looks like at the end, mine once I unscrewed the end cap had a further blanking plate (that is what you drill) if yours is the same then ye go for it, have a look at my other video. I made the holes a tad bigger and sounds better, while I wad parked up a few guys on 125 came up to me and thought I had a new exhaust and down pipe,so works great.... ☺
@Zjones55555
7 жыл бұрын
Claymore101 Mine is the same as yours then with the blanking plate, thanks for the tip that will certainly help louden the exhaust on it. Thanks for that buddy ;D
@XP_Limit
3 жыл бұрын
I have the same bike but the issue I get is when I stop at a red light my engine cuts off so if anyone knows what could cause that let me know my main guess is I think I need to turn up RPM
@IckumaDigital
2 жыл бұрын
I have the same issue man, did you find a way to fix it after?
@XP_Limit
2 жыл бұрын
@@IckumaDigital well my bike does not have a choke and could that I need to just change the carbarator or tune it up
@XP_Limit
2 жыл бұрын
@@IckumaDigital no so far but does not hurt to take the bike apart look into agine it's simple engine to look at might be something with fuel pump defo
@michael-dm1up
5 жыл бұрын
What tail tidy is please
@grahamlimb182
5 жыл бұрын
Hi, it was just one off eBay, I think I paid about £15.00 there's loads out there.
@leebrennan7223
6 жыл бұрын
Claymore ! Can u tell me how much you been quoted for Full Motorbike licence!? I done just a CBT as at mo got 125cc scooter. I thought about doing Full Motorbike licence - until I was told the ££... I was told it will be from 550 - 650squid !
@grahamlimb182
6 жыл бұрын
Lee Brennan, hi mate. The cheapest I've been quoted was £495 local to me over 3 days. Hope this helps.
@leebrennan7223
6 жыл бұрын
Well cheaper I been quoted where I did the CBT Clay. They said only route is Direct Access) which would be from 550 - 600! I got a normal Car driving licence long ago... Christ what I been quoted for Full motorbike Licence is dear as my 1st car...
@leebrennan7223
6 жыл бұрын
Caly , at mo I got Lexmotor twist&Go FMS 125cc... its a good scooter.. biggish presence for a Scooter.. not quick off Mark.. but happy gets up to 65mph ish.. Only prob I find it is the Exhausts are not great quality on them.. Going do what u did on your Venom... Clay.
@grahamlimb182
6 жыл бұрын
Lee Brennan yes it worked well, I mean it won't do anything to performance but it sounds much better.
@jeremycubs8331
7 жыл бұрын
Any issue with the police with your L plates like that?
@grahamlimb182
7 жыл бұрын
Metal sucks no, I've been stopped once and they said as long as they are clearly visible then they are ok.
@damonstewart5313
3 жыл бұрын
If you don't want L plate on your number plate back off your helmet will do the job
@TristanTradgedy
Жыл бұрын
Both of these L plates are illegal, he got lucky with the feds, one day you may not be. Cutting them down is really not worth the potential 3 points per plate and fine. If you don't like L plates, get a full licence. Also he's removed the rear reflector which is illegal too. Again, you might never get pulled for it but if you do, the points on your license and increased insurance cost will have you wishing you left it on.
@s1yess399
7 жыл бұрын
ok so r they just like pitbike ones !!!! r the simple to just put on
@grahamlimb182
7 жыл бұрын
it is just a couple of bolts, unless you get some with built in LED' S then there's a bit more to it.
@s1yess399
7 жыл бұрын
ok thanks mate gonna look into it now
@benwillams572
6 жыл бұрын
Aaahhhhh vertical !!!!!
@reececockayne3316
6 жыл бұрын
May have been me you past with the "shit music", on the SE.
@stevistevi8459
5 жыл бұрын
Why do u have L on your bike
@grahamlimb182
5 жыл бұрын
In the UK until you pass your full bike test your bike must have a L plate on it....
@tashlelliott6245
4 жыл бұрын
L plate is so Iegal is front 😂
@TristanTradgedy
Жыл бұрын
Both are illegal, not just front.
@s1yess399
7 жыл бұрын
??????
@grahamlimb182
7 жыл бұрын
Hi bud, Sorry I didn't get back to You, I was just looking for the link then from where I got them from and for some reason eBay didn't store my older purchases, if you put motorcycle handlebar guard's it comes up with loads. I hope this helps.
@s1yess399
7 жыл бұрын
so basically like any pitbike wind guards r they simple to put str8t on any adjustments?
@grahamlimb182
7 жыл бұрын
it depends on how your bars lay out is, but they are really easy to fit, if I can do them, anyone can.
Пікірлер: 39