Thank You Sir! I was having difficulty in opening the remote. I got through in fixing my problem , and the remote is working just fine now. My Wife is very happy now. May God Bless You and Your Family with Good Health and Prosperity. Thank You from Trinidad and Tobago 🇹🇹
@PiyushPrasoon
4 жыл бұрын
Hi @Fahyad Murtaza Singh, You are always welcome....!! happy to know that, your family is happy.....:-) Glade to know that you have fixed the issue by watching my video. And thank you so much, as you have contributed your effort in saving the environment......!!!! #Refurbish #Recycle #Reuse
@pkamdroid2181
2 жыл бұрын
Thanks for your trick , Using the knife is much easier than expected , I can open my remote and fixed it !!
@binnyjazzie
2 жыл бұрын
Thanks brother, it worked after your suggestions. Long live self repairing skills.
@PiyushPrasoon
2 жыл бұрын
that's great ✌ yeah that's what I am trying to spread 🤘
@اسامهالهرش-ص2ض
6 жыл бұрын
Thank you for your interest in spreading awareness among people
@tiaanpretorius9491
6 жыл бұрын
Thank you for this, having the same exact problem and LG is quoting us about $40.00 for a new remote.
@PiyushPrasoon
6 жыл бұрын
I really appreciate the people who is making there own way to get rid of problems, especially when they are saving themselves from paying an unnecessary amount to the company, even for a minor issues. Great Job......keep it up....!!
@hansvanderhoef6686
6 жыл бұрын
You did an excellent job,txs for watching it.
@alvinwj
2 жыл бұрын
Thanks man! Save me a few bucks, doesn’t need to buy a new remote. Mine got a leak from the batteries and the button are shorted. Press a button there and the other one that responding. A swipe of tissue with isopropyl alcohol is enough.
@PiyushPrasoon
2 жыл бұрын
That's so cool, thanks for sharing your experience :-)
@alpeshpanchal
3 жыл бұрын
good video, remote ke button press karte samay jo beep sound aata hai vo remorte se aata hai ki AC indoor unit se?
@PiyushPrasoon
3 жыл бұрын
AC Unit se aata hai
@SuperMerlot
3 жыл бұрын
Thanks for this. Mine had the battery leaking from the opposite side and did not need wire replacement. But taking the remote apart is such a pain; when I finally did two plastic brackets got broken. Horrible design by LG for the building of their remotes
@PiyushPrasoon
3 жыл бұрын
Welcome, BTW did your issue got resolved?
@chandramouli690
2 жыл бұрын
Thank you brother
@techvraj
3 жыл бұрын
I hv videocon remote. When i turn on power button it strucks there and buttons not working, so is it crystal issue?
@PiyushPrasoon
3 жыл бұрын
You just need a deep cleaning of the remote.
@sobharaveendran4772
4 жыл бұрын
Thanks sir ..it was helpful..
@PiyushPrasoon
4 жыл бұрын
You are always welcome....!
@eileenj2
3 жыл бұрын
I cannot get this remote to come apart. I think I’m even using the same exact knife
@PiyushPrasoon
3 жыл бұрын
Sorry to know that. I guess you are doing it very softly, cause this remote is just glued up. Anyway its better if you could check the same with a technician.
@roxannepillay6219
3 жыл бұрын
Can you change the LED?
@PiyushPrasoon
3 жыл бұрын
Offcource, but remember this is infrared LED BTW you can get single LED at very very low price.
@SharikCreation89
2 жыл бұрын
Bro mene remote ke sell change kiye h to ab remote ki screen pr kuch nhi dikh rha h please solve it
@PiyushPrasoon
2 жыл бұрын
Ek bar aap purane wale cell ko laga ke check karo, and sayad metalic part jahan pe battery ke terminals touch hote hain battery ko remote me lagane ke bad usko bhi ek bar check kro agar wahan pe koi corrosion hai to.
@PiyushPrasoon
2 жыл бұрын
agar corrosion thora bhi hai to usko kisi sharp cheez se scratch kar ke saf karna hoga, sandpaper is the best to clean the terminals.
@JoseEspinoza-ij9lb
3 жыл бұрын
is there a way to reset the remote, mine is not working. It turns on but it doesn't send signal to AC
@PiyushPrasoon
3 жыл бұрын
FYI, these remotes are not that smart. If it is not working it means there is some issue in physical connection. you could try check 1. each connection (it would be easier as it in no having much) 2. clean up the PCB with isopropyl alcohol (IPA) 3. Check weather IR LED is blinking when you are pressing the button. dont be confuse b/w IR and Normal LED. it any led in the remote is visible it means that is not the IR LED. To check IR led focus a mobile camera on LED and press the button if it is blinking then you remote is OK and transmitting the signal. Do the above checks and let me know .
@Rajwant03
6 жыл бұрын
There is any heating option in this remote or can I use a heater in lg split ac remote model same which you using in this video plzzzz guide me ????
@PiyushPrasoon
6 жыл бұрын
No this model does not equipped with the heater in it. You need to go for the external room heaters.
@njrsa
4 жыл бұрын
I cant open the remote with knife its too tight. Any suggestions?
@PiyushPrasoon
4 жыл бұрын
Off course, If you will open it for the first time it will be tight. They are using glue as well to fix it. I could suggest to blow hot air over the joint to loosen the glue then try to open it. Rest depends on you capabilities. ***But please do it at you own risk.
@njrsa
4 жыл бұрын
Piyush Prasoon ok thankyou for your reply. I will try that. But What is the risk of opening?
@njrsa
4 жыл бұрын
Piyush Prasoon thankyou for the play. What will be the risk ?
@PiyushPrasoon
4 жыл бұрын
@@njrsa There is nothing inside a remote control except a ling PCB. if you are opening it properly from the joints then its okay..... there will be a PCB inside and you the get the point on the PCB where battery power could be applied. The only risk is that, if you don't have circuit knowledge or if you don't have any previous electronics items repairing experience, then you may break any thing unknowingly.
@njrsa
4 жыл бұрын
Piyush Prasoon thankyou... i just wanted to know if i opening if hard may cut any wires.. thanks for clarifying.. i dont have electronics repair experience. I just want to open and clean the battery leakage
@ashleygopall8356
2 жыл бұрын
👍👍👍👍👍👍👍👍👍
@BackbencherMedium
6 ай бұрын
Not solved 😢
@advikkrishnakerala7415
6 жыл бұрын
Thanks
@baraskarify
7 жыл бұрын
My remote blinks but nt start
@PiyushPrasoon
7 жыл бұрын
If it is blinking it means it is transmitting the signal. You need to keep few things in mind while using IR(infra-red) remote control unit: 1. It should be in the LOS (line of sight) with the receiver LED (eg: the infrared signal receiver which is mostly find in- front side of T.V ) 2. Try changing the remote control unit battery. 3. Clean the remote LED (IR transmitter) as well as the receiver on the electronic appliances. In case it does not work even after following the above instruction, it means there might be some problem with the receiver fixed on/in the electronics/electrical appliances and you need to call the technical expert to get rid of this issue.
Пікірлер: 50