Hi guys ! You may remember that we talked about battery management systems to be used with li ion batteries in a previous video. When creating a battery pack using lithium batteries, a suitable battery management system or a BMS module must be used. . So today we will talk about a BMS module which is operated by bm3451 single controlling ic in this video.
--Description--
1. This protection board is 3s 4s 5s in common use LiFePo battery protection board
2. specific chip, stable performance, support disconnect protection, over-current protection, over-current protection, overload protection, with balancing, etc.
3. Common use for "same port" and "different port", the protection board uses 15 ultra-low resistance high-power MOS tubes (discharge of 8, recharge of 7), in the same port mode can support the current of discharge 60A, recharge current 60A;
4. Can be used for LiFePo batteries, battery packs etc.
--Parameter--
Single cell battery boost protect voltage: 3.61-3.69V
Single cell battery overcharge protect recovery voltage: 3.5-3.6V
Overload protect delay: 1.5-2.5S
Single cell battery over discharge protect voltage: 2.27-2.43V
Single cell battery over discharge protect recovery voltage: 2.45-2.65V
Overload protect current: 100A
Overcurrent protect current: 100A
Overload protection delay: 0.5-1.5S
Temperature Protection: Yes, have temperature control interface.
Unplug protect: yes
Deficiency protect: yes
Shortage delay: 100-600uS
Lack protect recovery mode: load release off.
Contact discharge current: 80A
Charging current: 60A
Balance function: yes
Balance Ampere (current) : 50MA
Balance voltage accuracy: 3.355-3.455V
------MORE VIDEOS------
IP2312 Quick Fast Charging Board.
• IP2312 Quick Fast Char...
SZBK07 300W 20A Buck converter
• SZBK07 300W 20A Buck c...
How to make Power Backup UPS For Router and Modem
• How to make Power Back...
Wireless Charger Transmitter And Receiver Modules.
• Wireless Charger Trans...
PWM solar charge controller
• PWM solar charge contr...
How to modify TP4056 module
• How to modify TP4056 m...
ECC Easy Chip Charge Module
• ECC Easy Chip Charge M...
Tp4056 Li-ion battery charging module
• Tp4056 Li-ion battery ...
How to use CKCS BS01 Mini DC-DC Step Up Module
• Tp4056 Li-ion battery ...
How BMS modules are Working
• How to make Li-Ion Bat...
How to make Power Backup UPS For Router and Modem
• How to make Power Back...
How to use XL-6009 Buck Boost convertor
• How to use XL6009 Buck...
XH-M604 Battery Cut-Off Module With Display. Configuration and Full Review.
• XH-M604 Battery Cut-Of...
Негізгі бет Li-ion/LiFePo4 Battery Protection 100A BMS 3S 4S 5S 12V 16.8V 21V With Balance Charging Module.
Пікірлер: 79