So dumb to need so many controllers to do some led lighting. It's like mixing 20th and 21st century tech. Should be 1 controller, and 1 software to control everything. Esp for the price.
@KleoYan
Жыл бұрын
Hi Nick G, welcome to my channel and thank you for your feedback, just a suggestion, you might want to write in to Lian Li to suggest it.
@micspamgod2324
Жыл бұрын
I won’t lie, I definitely agree to this. Should be much, much more simple this day and age.
@KleoYan
Жыл бұрын
@@micspamgod2324 welcome to my channel. Thank you for your feedback, I have sent this feedback to Lian Li and it will be great if you can highlight this at Lian Li's Reddit forum. www.reddit.com/r/lianli/
@lenkaa.9955
10 ай бұрын
I am really irritated that I have spent soo much money and it took us hours searching on web how to connect, AIO and fans. And then you find out you need hub. Which is not shown on any manual.
@stjah69
10 ай бұрын
Thank you very much for your video. I bought the denier lian li galahad ii 360 trinity sl-inf. I am in Full Corsair. But I wanted to change brand. So I took out my Corsair AIO and put in a Lian li AIO. But I've kept my Corsair QL series for the time being. So I have L connect and ICUE at the same time. No problem for the moment. I'm waiting for my Uny fan revers :) I was wondering why my Lian li peripherals were appearing in my taskbar. But when I saw your video, apparently everything's fine because you've got it too. With Corsair nothing appeared. I also use the NZXT. On the other hand, I don't know why I get a little loading in the background every 5 minutes. If I cut L connect I don't get it anymore.
@KleoYan
10 ай бұрын
Hi Protect_Dreams, welcome to my channel, thank you for your valuable feedback. Now as for your background process, this I am not able to answer you but I do know that all argb programs make use of one common shared IRQ, which ended up applications might just grabbing for permission grant, this could be one of the cause.
@lttlejordan23
2 жыл бұрын
This was super helpful! Just swapped out my Corsair LL120 fans for Uni SL120 Infinity fans yesterday. Night & day difference in quality! And the amount of wiring is about a fourth of what it was. Very happy about that! But this video gave me some tips that I didn't think about or was unsure about, so thank you!
@KleoYan
2 жыл бұрын
Hi TravD23, welcome to my channel and am glad you like the content of this video. I have a series of these Lian Li argb stuff which might interest you kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm once again thank you for the visit and all the best with your PC build 👍
@NoOne-qc5fn
Жыл бұрын
Is it worth to change ? i have LL120 and been considering to change to the SL120 infinity for a while
@lttlejordan23
Жыл бұрын
@@NoOne-qc5fn Definitely worth it for me. As stated above, it cut my wiring down to only a handful of cables. They also perform well (temps have been solid) and look amazing. So for me, it is absolutely worth the change.
@RathalosEmperor
Жыл бұрын
@NoOne-qc5fn not as easy at it seems. It's a pain the ass and wish I didn't undo all my good cable managing I had with my QLs I plugged everything up and the l connect 3 doesn't even detect my fans
@TimboSlice083
6 ай бұрын
I only see a TAB for SL-Inf, but not TL-LCD. I do have the controller all plugged in. It detects it in other areas of the software. I can change what is display on the screen and change the fan settings, just not under Fan / Pump Profile.
@KleoYan
6 ай бұрын
Hi TimboSlice083, welcome to my channel. did the TL-LCD pops up on your device manager?
@TheSound0fLegends
Ай бұрын
The controllers are terrible. Lian Li not making a controller that has more than 3 ports is terrible. The lighting looks ok on my TL fans but only if you use solid colour, the effects are really jarring and I'm pretty disappointed really at the basic level of the L Connect software. Almost every single effect gives an error.
@KleoYan
Ай бұрын
Hi The Sound of Legends, welcome to my channel. I would partially agree with you. In general it greatly depends on how many ARGB , LCD devices you are applying on a system. All these ARGB And LCD applications shared the same system address. Each application has it's own flaws here and there. else the only application which is the SignalRGB has an upper hand, that is to set and to have all controller application by pass to sync only with SignalRRB. so ya.. you might want to try SignalRGB but do note, some effects may need to pay.
@Varowo
3 ай бұрын
Hi Kleo, after several months, I finally got my whole pc from LianLi :D Everything works perfectly but... Is it normal that the device manager detects LianLi-SL-Infinity-v1.4 and LianLi-GA_II_LCD_v1.3 and allows to "eject" it? I have 10 SL-Inf connected to the Galahad 2 LCD SL Inf controller. Thank you!
@KleoYan
3 ай бұрын
Hi Varo Go, welcome to my channel. As device able to be ejected, that's normal as any detachable USB devices will have this function in Windows. on my lower right corner of Windows 11, when I click on the USB Icon, I can select my GA II LCD to be ejected, but of course not going to do that, just let it be. If accidental click on eject, all is needed is to either go device manager to scan for hardware or to reboot your system.
@AbsolutelyPsychotic
4 ай бұрын
Both my ARGB header on my motherboard doesn't work (I believe they are gone for good) But with this product i don't have to toss my my ARGB fans, correct? Since this allows me to bypass "Motherboard" for ARGB Fans
@KleoYan
4 ай бұрын
Hi AP's Journey, welcome to my channel. the argb cable which is between the Lian Li controller / hub to your motherboard ARGB header is optional. you can don't use motherboard argb utlity at all, just remove that cable and make use of L-Connect 3 app to controller the argb effects which the command is from your motherboard USB header to your Lian Li controller / hub. then to your uni fans.
@yuriferreira2915
3 ай бұрын
Hello friend, can you help me? I also have an nzxt hub but the l conect does not recognize my strimers and fans, can you help me??? I already updated the motherboard drivers in the manager, lianli does not appear in the drivers, I cannot make it work in any way
@KleoYan
3 ай бұрын
Hi Yuri Ferreira, welcome to my channel. Did you test it without the NZXT internal hub. Do it one controller at a time. does your Windows OS detect the controller? Sequence as follow 1st plug uni fan controller. does it detect? if yes, remove the controller, plug the strimer plus V2 controller. does it detect? if individually detects, then plug your NZXT Internal hub. if it does not work, means you either did not plug the sata power source to your NZXT Hub or your hub is faulty.
@adamotak5145
3 ай бұрын
what's the reason that the SL infinity RGB is not turning on at all but the fans working fine, did all troubleshooting SL infinity controller shows in both device manager/L connect software and its firmware/chipset/bios all up to date. even ordered 3 new fans connected them with new sl infinity controller and wires fans worked but rgb still does not work? also when i connect the sl infinity controller both the old or brand new one to sata power in psu only the sl infinity controller nothing else, it doesn't let pc to boot or turn on shows a red light but when you connect sl infinity controller to cpu/pcie in psu pc boots normally fans work but rgb doesnt work? when i connect sl infinity controller and fans both my old one and new one in my other pc it works flawlessly both rgb and fans. dont know why it has issues with my main pc did everything cleared cmos bios flashed latest bios uninstalled all rgb apps with revo uninstaller but rgb still dont work only fans motherboard is msi z790 motherboard and cpu is core i 9 1200k intel cpu. i have 3 sl infinity fans with regular cables no sl infinity controller that connects to fan and rgb header on the motherboard those works fine and when i tried and connected that regular cables with my old fans they also worked both rgb/fan so now i think the only way i can fix the rgb for my other 6 fans finding 2 new regular cable that connects straight to motherboard fan/rgb header will fix my issues since even ordering 3 new sl infinity fans and a new sl inifity controller that even didnt work only fans worked rgb didnt turn on.
@KleoYan
3 ай бұрын
Hi Adam Otak, welcome to my channel. It seems like a motherboard issue. have you tried changing the USB header of your motherboard or try this 1) Turn off your system, switch off the PSU botton to off 2) switch off main switch which provides power from the AC cable to your PSU. 3) press your power button of your case a couple of times to discharge any current holding on your motherboard 4) leave it for 45 seconds. 5) plug everything back on and turn on your system. see if the steps above resolves the issue.if not, last resort, get a spare nvme m.2 or 2.5" ssd, install fresh windows OS and try it. if all these still does not help. then I have no clue what's going on but to pin point on your motherboard.
@MidnightGrabber
7 ай бұрын
Hey, what would you recommend my RPM to be at? I built a PC and just noticed my quiet RPM was 1200 so my fans were always loud. So I changed my base RPM to 800 now, but not sure if it automatically speeds up when the GPU / CPU hit higher temps. What would be a good RPM for certain temps? Just don't want my computer getting too unnecessary loud. I have 9 SL V2 vans in at the moment. Also which line is better curved or straight to change the RPM? Thanks!
@KleoYan
7 ай бұрын
Hi Jesse, welcome to my channel. In general from temperature 30 to 55. I will run 900 to 1k rpm. From 55 to 70 I will run 1k to 1.2k rpm. From 70 to 85 I will run 1.2k to 1.5 k rpm and from 85 to 100 will be at 1.5 to 1.8k rpm.
@Jules_Diplopia
2 жыл бұрын
Power supply is probably only relevant to those people using lots of controllers and fans. BUT the suggestions regarding the USB hub is genius. Most of us have far too many USB devices, connected externally, but we don't know which internal USB line they are running from, and if it has enough power.
@KleoYan
2 жыл бұрын
Hi Julie Fisher, welcome back. Yup, I have tried using usb splitters which does not have sufficient power and due to the fact that most PC users uses too many usb devices. This will cause intermittence or even unable to recognise the device. That’s why I choose to use an internal usb hub which is powered by the psu sata directly. Btw am using the NXZT internal hub.
@malanderson491
11 ай бұрын
Hi Kleo Yan, I have the old strimmers types (Qty 2) and wonder if I can plug them into a new UNI fan SL-INF 120 controller which has no fans plugged into it, as I want to try and control all my lighting through Connect 3. I already have the Galahad II pump AIO controller in my system but all the ports are full with fans and the pump. Can I use a second controller to run my strimmers? I am stuck with this problem on how to add my strimmers. I hope you can help. or should I purchase the new Lian Li Strimer Plus V2 24-Pin ARGB Motherboard Extension Cable and Lian Li Strimer Plus V2 Triple 8-pin ARGB GPU Extension Cable which come with a controller?
@KleoYan
11 ай бұрын
Hi Mal Anderson, welcome to my channel. for your case, you will need a strimer plus V2 controller (www.aliexpress.com/item/1005004239607087.html?) and does your motherboard have another USB 2.0 header? normally a board is equip with 2. if both are used up, you will need a USB Splitter (www.aliexpress.com/item/1005005121350909.html)
@xandrelphane
8 ай бұрын
Hello Kleo, I recently updated my L-connect 3 together with my SL120 Infinity fans firmware. But ever since the updates everytime my pc restarts or turn on the L-connect doesn't save my rgb settings and it keeps reverting to rainbow effect each start up. Any clue?
@KleoYan
8 ай бұрын
Hi Grizworth, welcome to my channel. everytime you update the L-Connect 3 app, it will first remove the necessary settings and bring back to default. Best way to counter this is to export what you have set, so once you lose your profile, you can import it in. There is an import or export button at your SL Inifinity dash board in L-Connect when you set the argb effects lian-li.com/l-connect3/l3-manual_backup/#elementor-toc__heading-anchor-3
@EduardoSantos-fr9xn
Жыл бұрын
Hi! I'm kind of new on what pc building refers, i have builded a full ROG pc, but i installed a galahad 360 and 4 SL and 2 strimer plus. I'm having troubles to make the argb works on "mb lightning sync", could anyone give an advice to solve that issue?
@KleoYan
Жыл бұрын
Hi Eduardo Santos, welcome to my channel. does your SL Fan come with a uni controller? Also which strimer plus version did you purchase? As I need to know exactly which lian li products you are using, else can't give you a proper answer or help.
@craigchrist360
11 ай бұрын
My firmware won’t update on my SL120 fans I have v1.2 but it says v1.8 is available but says “unsuccessful”, then the device disappears and pops back up
@KleoYan
11 ай бұрын
Hi craigchrist360, welcome to my channel. Try update firmware manually lian-li.com/l-connect3/L3_update_manually/
@fisnikhoxha3114
8 ай бұрын
Hi again Kleo, I had a question on how to connect the lian li uni fans sl infinity to my motherboard, I’m using an MSI Mag b550 wifi max motherboard and it only has 2 argb headers. One at the bottom of the mobo and 1 at the top i plan on using the galahad 2 trinity on the side of the case which is the lian li o11 vision, 3 fans at the bottom and 2 on the rear as exhaust, i need help as to how im going to connect these fans into the argb headers on the motherboard and have no clue. Would there be an option of not plugging these in at all and still having the fans rgb with the lian li l-connect 3 or is it mandatory to plug all of these fans in. Sorry if this is long im just very very confused and this is also my first build.
@KleoYan
8 ай бұрын
Hi Fisnik Hoxha, welcome back. Your Uni fans on the Uni controller, you do not need to plug it to your motherboard ARGB header. You can use the L-Connect 3 app to control the Uni fans. So that will save your issue.
@Valyn
11 ай бұрын
I was having issues with getting Lconnect to see the fans. Turns out my NZXT mobo came with a USB splitter, and that was causing problems. Fans still worked at full speed, but no control until I got rid of that splitter.
@KleoYan
11 ай бұрын
Hi Qix, welcome to my channel and thank you for sharing your experience with us, greatly appreciated it. Are your uni fans working properly now?
@cookiecook1000
7 ай бұрын
Can I connect my stimmers to my SL hub? And just use one hub instead of two? Also I have the lian li 216 case how do I get my front fans to sync?
@KleoYan
7 ай бұрын
Hi cookiecook1000, welcome to my channel. It’s good that you asked. Kindly do not do that. Strimer plus draws a lot of ampere, that’s why it has its own controller / hub. As for the 216 fan ARGB. There are no dedicated dash board in l-connect 3 app but you can plug to any Uni controller that has a sync 2 and 4 port.
@IvoKurzemnieks
Жыл бұрын
I have 10 SL-INF fans. 3 top fans for AIO, 3 in front, 3 side and 1 in the back. Now if I connect all of them to 1 controller... do I have plug the controller into SYS_FAN? I understand that top AIO fans will not turn on until I'm booted into Windows. I kind of wish them to turn on when PC is turned on. What are my options?
@KleoYan
Жыл бұрын
Hello Ivo Kurzemnieks, welcome to my channel. as what you've mentioned, you can choose to use the L-Connect 3 to control the RPM and argb, you need not have to plug anything to the motherboard fan header, unless you wanted to control the RPM via your motherboard UEFI or it's utility software. as for the boot up, there are no other options, you will have to load to windows inoder to kick start L-Connect 3.
Жыл бұрын
I'm sorry i just randomly saw this video... and i had to come here to answer... How to make it work?(l connect 3) - you can't (joking) I think this is the worst app I had installed in my pc since i can remember... all it does is freezing... its like the programmers didn't knew how to use multi threading
@KleoYan
Жыл бұрын
Hi Joao Serra, welcome to my channel and thank you for your valuable feedback. 😉 as for worst, hmm 🤔 honestly I have done some builds, the only issues I face are with older pcs, but with newer generation processors and only one argb ego platform (L-Connect 3) are without issues. Also there will be issues using different kinds of argb devices with their application. Reason is, all argb shares the same IRQ. Which those argb application installed are fighting for access rights (Asus armoury crate, nzxt cam, icue and etc)
@adz_khr
7 ай бұрын
Hey i really enjoyed the detailed explanation, I just finished my new build and have installed 9 Tl fans on my pc, 3 lcd on the side 3 tl led at the bottom and 3 tl led at the top, so i replaced the standard fans that came with the lian li galahad lcd aio with 3 tl fans instead and connected them into the controller, so i am using 3 ports, however the three top fans are not lighting up or showing as connected in the software but they are spinning and working, on the l3 connect software it shows port 2 and 3 fans which are the ones at the bottom and the lcd fans on the side and it also shows the aio too. i been trying to find out why this is and i have checked everywhere but im not sure why this is the case, any information or help would be appreciated so much 🙏🏻
@KleoYan
7 ай бұрын
Hi adz_khr, welcome to my channel. I would advise you to do this. - Uninstall L-Connect 3 app, using revo uninstaller, ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller kzitem.info/news/bejne/1oOdu42fmp2hq4I - Next turn off your pc and do the connection as listed below. a) Connect your daisy chained 3 x TL LED fans (Radiator Top) to port 1 b) Connect your daisy chained 3 x TL LCD fans (Side) to port 2 (TL LCD fans will only work from port 2 to port 4, it does not work with port 1) c) Connect your daisy chained 3 x TL LED fans (bottom) to port 3 Once you have done the connection above. Boot up your pc, check on device manager to see if you are able to see the TL Controller listed under Universal Serial Bus Devices. Next install L-Connect 3 app, check for firmware updates. Test your fans and TL LCD again.
@noxmu4715
2 жыл бұрын
Another excellent video, I do have an issue with L-connect 3. I've tried different methods but failed. Your tip on even power distribution have solved the problem. Thank you Kleo, you are awesome as usual.
@KleoYan
2 жыл бұрын
Hi Nox Mu, welcome back, I am gald you have fixed your issue and thank you for the compliment.
@Adtysnt_
Жыл бұрын
18:48 im so sorry to say, but this cause my warzone 2.0 wouldn't launch again... I've tried anything I can but, I cant launch it.. fml
@KleoYan
Жыл бұрын
Hi Jagras Labs, welcome to my channel. did you disable it that does not allow you to or did you enable it again and it does not allow you to launch the app (warzone)?
@minthos4045
Жыл бұрын
Make 1 simple advance powerful hub and simplify the whole eco system. I don't want to have multiple hub and cable clutters in my system.
@KleoYan
Жыл бұрын
Hello mint hos, welcome to my channel. Yes everyone wants a one hub does everything. Maybe it will be a good idea to post your comment at Lian Li's reddit page, at least they will see comments and might come out with a solution www.reddit.com/r/lianli/
@stevencooley3367
8 ай бұрын
Is it best to use L connect when all the rgb fans are connected to the 216 case controller? Or do I stick to motherboard rgb control?
@KleoYan
8 ай бұрын
Hi Steven Cooley, welcome to my channel, you are not able to use the L-Connect 3 without a controller or hub (Uni fan controller or Strimer Plus V2 controller), which specifically taking instructions from L-Connect 3 app. The case argb controller does not pick up the instructions from L-Connect 3 app, therefore you will have to connect it to your motherboard and to use the motherboard utlity to control the argb effects.
@deadpoolisdead0217
10 ай бұрын
I can only find a non powered internal usb hub i just need it for a 24 pin strimmer and a gpu strimmer or will that cause problems ?
@KleoYan
10 ай бұрын
Hello Deadpoolisdead, welcome to my channel. You can give it a try as my experience are with multiple controllers.
@shane62872
Жыл бұрын
hello, thanks for your tutorial. do you know why the yellow and green digits don't show on my unigine heaven benchmark test run?
@KleoYan
Жыл бұрын
HEllo Shane Tan, welcome to my channel. those are OSD which you will need HWinfo64 and Riva Tuner to show those stats..
@georgiominas
2 жыл бұрын
Does anybody know if there is a way to use hex codes to manually input a specific colour using L connect 3, I have the infinity fans and I would like to have a halo themed colour scheme
@KleoYan
2 жыл бұрын
Hello Georgia, welcome to my channel as for what you are asking. Pardon me, I do not know coding and you might want to try ask your questions at Lian Li’s Reddit forum www.reddit.com/r/lianli/ once again thank you to have visit and and question.
@DXLiu-x3u
Жыл бұрын
i am using galahad aio 360, i have connected the fan and rgb wires to the mobo. do i use the controller connection method before i can use the software to control?
@KleoYan
Жыл бұрын
hi DX Liu, welcome to my channel. if you are having uni fans on your galahad, it's good to have fan connectors to your motherboard and plus the fans to the uni controller, use L-Connect 3 app to control the argb effects.
@keaty1984
Жыл бұрын
Everywhere is out of stock of the triple pack, can I just buy 3 fans and the right controller?
@KleoYan
Жыл бұрын
Hi enduro_mtb, welcome to my channel. You can do that but subject to availability, just make sure to get the correct controller for your Uni Fans.
@mrrod3004
2 жыл бұрын
I can only get 2 out of 4 plugs to work I have bought multple controllers. I'm about done.. I can only power two sets of fan the other two plugs show the fans at 0 rpm and will not tuen on with the others...
@KleoYan
2 жыл бұрын
Hello Mr Rod. Maybe watch this which might aid you out kzitem.info/news/bejne/pJ2s24l8npiXa4o
@dexter23foxy
Жыл бұрын
i just installed the latest lian LI RGB fan inifinity the problem is the application after boot wont minimize by itself
@KleoYan
Жыл бұрын
Hello Dexter Gilapay, welcome back. On L-Connect 3, go to settings where you have the minimise when closing windows. Unchecked that and uncheck auto run. With the l-connect 3 app display still on. Shut down your pc. Boot it up again. Then launch l-connect 3 app. Enable back the two functions and still having the l-connect 3 on, shut down your pc again. Then turn it back on. I did have the same issue like yours and I did that. Give it a try.
@king.tlx1
Жыл бұрын
can someone please help me with this i have everything plugged in to the psu the sata cables and downloaded l connect software and the fans turn on and spin but they dont light up and im not sure why
@KleoYan
Жыл бұрын
Hi OneBustedPimple, welcome to my channel, I like to ask if you did see the lian li controllers listed in your windows os, under device managment? and when you launch L-Connect 3 app, does it reflect all the temperature stats?
@haies09
Жыл бұрын
Only problem I’m having is the high CPU usage due to the L-Connect. Also is it normal for the fan to be shown as a removable device in the taskbar tray?
@KleoYan
Жыл бұрын
Hello Hanies, welcome to my channel. High useage of CPU can be caused by alot of resources sharing the same IRQ as the usb devices you have used or it could be other causes like background apps that make use shared program code that interfer with your L-Connect app. I am not able to tell you which, you will need to figure out yourself. for a start if you have alot USB connecting device, remove them all and slowly plug one at a time so see if it does take up the system resource which is shared with your L-Connect 3 app. (Excluding Keyboard and Mouse)
@haies09
Жыл бұрын
@@KleoYan Thanks for the reply, I’ll have to try that. I had to use a USB hub as I have the Corsair LCD pump and Commander Core inside the case too.
@KleoYan
Жыл бұрын
@@haies09 ok that might be the issue. you have two devices that runs argb program at the background, both are fighting for rigths as both make use of the same IRQ, therefore the conflict might start from there. so something which you will need to take note on... all the best with your troubleshooting.
@simonaustin8992
Жыл бұрын
My L connect 3 is running painfully slow, I can’t do anything with it and can’t find help anywhere
@KleoYan
Жыл бұрын
Hello Simon Austin, welcome to my channel, are you able to check what's the process usage as in percentage of L-Connect 3 app? maybe you want to try remove the app and reinstall the app, use Revo Uninstaller to clear off all the unwanted files and registry before you do a clean install of the L-Connect 3 app.
@alpha416game3
Жыл бұрын
hi bro can i use lian li fans and strimmer V2 connected to nzxt hub or will it have power issues
@KleoYan
Жыл бұрын
Hello Alpha416 Game, welcome to my channel, pardon me. which NZXT Hub are you referring to? Is it the one shown in this video? the NZXT Internal USB 3.0 Hub. if it is.. no issue as power drawn from the uni fans are from it's uni controller and the Strimer Plus V2 from it's controller.
@kida4313
11 ай бұрын
Could you make a video on how to install these fans on an AIO of some other brand?
@KleoYan
11 ай бұрын
Hi Kid A, welcome to my channel, I am unsure what you are looking for. plus I do not have all the aios and such. if you are referring to Corsair and NXZT. do pardon me, I have tried asking but they have not reply on my request. the only stuff I have are here. imgur.com/gallery/zEKCkRf or imgur.com/gallery/wxrKnQd
@Vulcankrypto21
Жыл бұрын
Been driving me nuts trying to figure out ways to connect my V1 to my mobo turns out it’s just cuz I have the manual V1 guess I’ll go ahead and get the V2 box thank you !
@KleoYan
Жыл бұрын
Hi Vulcan Krpyto Gaming, welcome to my channel. I am glad this content did aid you. All the best with your build. 😉
@BoxSamma
Жыл бұрын
does having l-connect 3 affect pc fps performance like other rgb software?
@KleoYan
Жыл бұрын
Hello Box, welcome to my channel, best to optimise a pc is not to have argb, get performance case fans and cooler.. without any background running apps you will optimize more system performance. Which this is the truth. Once you start to use any software that uses background process. your FPS will slightly drop.
@PowerPawaa
Жыл бұрын
Hi man I had a question about the sl120 v2 fans. I’m planning on not using lian Li controllers but razer chroma controller so I can control 10 of these fans from my motherboard and other software. If I daisy chained 3 fans by sliding them together x3 (3 at top, 3 at bottom and 3 at side then one fan at the rear), can I plug the 4 ARGB headers into one razer chroma controller and then the PWM cables to the motherboard sys fan header (cpu fan header for the fans on a radiator)? Also, if I daisy chain 3 at a time by sliding them together will I be able to control each fans RGB individually through my motherboard or will my mobo only see the 3 daisy chained fans as one group(e.g. can I make one fan red, one blue, one green or can I only make all three one colour if they’re daisy chained).
@KleoYan
Жыл бұрын
Hi Power, welcome to my channel. I am only able to answer what I know. If you purchase the SL120 V2 fans as single pack. you can plus the fan's argb to the motherboard (covertor included) and the fan load to your motherboard fan header. AS for the Chroma controller, I have no experience on that but if it takes in normal argb 3pin 5volt standard argb connectors, then it should not be an issue. The only thing you need to take note is the load capacity. please check the specs of the Chroma controller, see how much ampere it can cater for and to check the SL120 V2 ampere too. As for the effects you are asking, this greatly depends on how Chroma design the argb effects and same applies your motherboard argb utility.
@Shepard7
Жыл бұрын
Hey thanks for the video! at 4:50 I connected the hub to all the connectors, the 5v and the argb on the ProArt motherboard, they work and I can control the fan speed through bios, but, the RGB lightening is not working, any idea why?
@KleoYan
Жыл бұрын
Hi Shepard, welcome to my channel, mind if I ask which uni fans are you using?
@Shepard7
Жыл бұрын
@@KleoYan Hey Kleo, thanks for your reply I just subbed your channel. I use the UNI fan SL-INF120 the latest. with the latest hub and everything.
@KleoYan
Жыл бұрын
@@Shepard7 I see, if you look at your uni controller. There are total of 6 port, which 4 of them are labeled as 1 to 4 (7pin socket) and 2 are labeled as sync 2 and sync 4 (3pin socket). As I have mentioned to you, for your radiator fans, use the SL Inf 120 individual pack where the cable is split to 4pin (pwm) and 3pin (argb). Connect the 4pin to your motherboard fan header (CPU_FAN) then the 3pin to the uni controller Sync 2 or 4. This way, you control the PWM using the motherboard instead of the uni controller and control the argb using the L-Connect 3. and to control the argb in L-Connect 3. You will need to have fans connected to port 2 which sync 2 will response to / port 4 which sync 4 will response to. For the rest of your SL Inf 120 (case fans), use the 7pin cable to connect from the fans to the uni controller. So both PWM and ARGB is controlled by the uni controller using L-Connect 3. As why doing this. In the event if the uni contoller malfunction. The radiator fans will only affect the argb effects but not stopping the fans from spinning accordingly to your motherboard pwm settings. This is just a safety measure.
@Shepard7
Жыл бұрын
@@KleoYan Thanks a lot, but I didn't get the cables for single fans, I bought the 3 fans set, and I use it for 2 top and 1 rear. So I'm limited here, no USB available slot, that's why I do it. Someone mentioned I can control the ARGB without L-Connect3 software, is that true?
@KleoYan
Жыл бұрын
@@Shepard7 Hi I am so sorry, the way I reply you is meants for another viewer. I got confuse with replying comments.. so sorry. ok for your case. if you got the 3 pack set. you have no choice but to make use of the uni controller which require the USB connection to your motherboard. if you are limited to USB 2.0 Header on your motherboard, you might want to get a Internal USB hub that is with the sata power connector, like the NXZT Internal USB hub. nzxt.com/product/internal-usb-hub-gen-3 the second question you asked. yes it is possible without using L-Connect but you will only be able to do this if you buy the individual pack as the cable is not in 7pin but in 3 and 4pin, 3pin argb and 4pin pwm, where you can plug directly to the motherboard Fan and argb header. then use the motherboard utlity to control the argb effects and the fan load (PWM). but make sure you check the load limit of the argb, do not daisy chained more that 4 fans and plug to the motherboard argb header.
@DailyUploads4950
7 ай бұрын
New to pc i tried to install and when i do it says completed but it wont let me open it up anyone got any idea
@KleoYan
7 ай бұрын
Hi DailyUplaods4950, welcome to my channel. Maybe can you list down what are the device you are using? without detail information, I am not able to advise you on anything. are you having SL AL uni fans? did you get them in triple pack that comes with the controller or single pack without a controller or did you purchase the strimer plus v2?
@dexter23foxy
Жыл бұрын
man the SL120 before got a cable connecting the other fan the newer unify one got none hey
@KleoYan
Жыл бұрын
Hi Deter Gilapay, welcome back. All uni fans in future will be in this way. Unless getting individual pack.
@clausbohm9807
Жыл бұрын
What if you are running two GPU's? How does L connect detect that?
@KleoYan
Жыл бұрын
Hi Claus Bohm, welcome to my channel. If you are using 2 x GPU, you will need two strimer plus V2 controllers and yes L-Connect does detect both V2 controllers with separate controls on the L-Connect 3 application.
@Alexandar16
Жыл бұрын
Thanks for the video. I have an issue with my Strimer. I recently installed the 24 pin v2 strimer and the 12vhpwr v2 to my lian li inf hub like you showed in one of your videos. My issue is that upon startup my system RGB from lian li inf fans synch with my motherboard as they should but my Strimers dont do that. They stay in default rgb color. They only synch up with motherboard when i startup L Connect 3. Is there a way to solve the issue? Thanks in advance :)
@KleoYan
Жыл бұрын
Hi Alexandar16, welcome to my channel. I like to check how did you plug your Strimver Plus V2? does it plug to the Strimer Plus V2 controller?
@Alexandar16
Жыл бұрын
@@KleoYan i plugged my strimer v2 hub to my lian li inf hub with a splitter. i have 10 fans (3 bottom, 3 side, 1 in the back and 3 up connected with my nzxt z79 aio cooler) all of them connected to the inf hub and now the strimer hub is now connected there too. The only thing i added there too is the NZXT internal usb hub since my motherboard only has two usb 2.0. The AIO and the Lian Li Inf hub is used with the NZXT usb hub. Thank you for your answer. I really appreciate it :)
@lordheimdallr
6 ай бұрын
I own the GALAHAD II LCD 360 SL-INF and the Problem I have is that the Software always is Pretty slow and when I change my RGB Settings it only changes after I restart the PC so not in Real time. Current firmware 1.4 is installed. Anyone else faced this issue?
@KleoYan
6 ай бұрын
Hello Heimdallr, welcome to my channel. Does it happened that you have other ARGB application installed?
@lordheimdallr
6 ай бұрын
@@KleoYan Thanks for your response. I have also installed the icue for my ram and Asus armoury software for my MB.
@GGSplash620
Жыл бұрын
hey @kleo yan do u know why my pc won’t connect to wifi so i can update the bios ?
@KleoYan
Жыл бұрын
Hi Nicholas Him, do you happened to have another PC or smart phone devices? If those are able to connect to your wifi, you might want to forget the wifi on your troubled pc. If not, get the wifi driver from then motherboard manufacturer and install it. See if that helps.
@Mwd52_
Жыл бұрын
how did you connect the strimer plus lighting ? it doesn't show to me
@KleoYan
Жыл бұрын
Hi M52, welcome to my channel. I have connected the strimer plus V2 to it's controller which is connected via a USB cable to the motherboard. if you do this correctly, your device manager in windows will show the strimer plus controller.
@luisenciso2209
7 ай бұрын
The fan pump/ pump rpm doesn't appear there. Please help
@KleoYan
7 ай бұрын
Hi Luis Enciso, welcome to my channel. do you mind to list down all your components that you are using. like motherboard and what lian li argb devices are you using. without those, I can't aid you.
@luisgrou8408
7 ай бұрын
Why i only have the option sytem info on my app? Ca somoene hel
@KleoYan
7 ай бұрын
Hi Luis Grou, welcome to my channel. You might want to go through these basic troubleshooting steps. Basic Troubleshooting steps Disclaimer : Though the chances are very low to brick firmware updates on motherboard and to any controllers. I will not be responsible if you have brick your motherboard or controller. 1) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version. 2) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html 3) Remove all argb apps (Asus Armory Crate / MSI Dragon Center / Giga Fusion / Asrock Polychrome). If the brands which I have mentioned, do have a uninstall tool like the Asus Armory Crate, use that, else use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller kzitem.info/news/bejne/1oOdu42fmp2hq4I 4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second 5) While waiting, please do not use KVM switches. Disconnect all devices that are connected to your motherboard (front / back IO). Leave only your Keyboard, Mouse , Monitor and Ethernet (If you have) connected directly to your motherboard. If your monitor has a KVM build-in, remove the USB cable from your monitor to your motherboard USB socket. If your mouse and keyboard are connected to your monitor, please remove them and plug them directly to your motherboard instead. 6) Plug only one Uni controller or Strimer Plus V2 controller. If its for Uni Fan (SL/AL) use only 3 fans to an output of the uni controller. 7) Plug the power cable and turn on your PC 8) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni / strimer plus V2 controller. 9) Install the L-Connect 3 app only lian-li.com/l-connect3/ (current version 1.3.16) 10) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON. 11) Reboot your system. 12) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed. 13) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 14) and proceed step 16) 14) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again. 15) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses) 16) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.
@MaxAltair
Жыл бұрын
With L connect can you set fans to 0% when temps are low?
@KleoYan
Жыл бұрын
Hello MaxAltair, welcome to my channel. Yes you can.
@forested
10 ай бұрын
Hello, can i just directly plug my SL-INF fans into the motherboard without the UNI controller? Will L-Connect still be able to control the RGB?
@KleoYan
10 ай бұрын
Hello Forested. Welcome to my channel. L-Connect 3 app will not be able to control your SL INF fans with the Uni controller. Unless you don’t use L-Connect 3 app and to make use of motherboard ARGB app, then connect them directly to your motherboard and please take note of the ampere when you do that. Check your motherboard menu what’s the max load for ARGB and Fan load of each header.
@forested
10 ай бұрын
@@KleoYan Hello, thanks for your reply. My motherboard is the Gigabyte Z790 Aero G. Will it be able to control the RGB simultaneously with it as well? Also, is it okay to buy ARGB splitter extension cables for my fans? (3+3+1+3 cooler)?
@KleoYan
10 ай бұрын
@@forested I would advise you to use the Uni controller but if you do not want to. Get a ARGB hub with power supplied from your PSU. Getting an ARGB splitter for the quantity of fans plus your other ARGB devices. The motherboard ARGB header will not be able to provide the ARGB load.
@akismpitsou3406
Жыл бұрын
Hello everyone. I have a Lian Li build case and i added lately a new hydro Lian Li Galahad II. My problem is that i spent a lot of time customizing the rgb strimers + hydro and when i turn on the PC and the L Connect 3 software runs on startup it resets to the default all the rgb settings. Then i have to customize again and again. If i turn off the L connect 3 program and never run the software again it runs smoothly. What should i do guys; Thanks 😊
@KleoYan
Жыл бұрын
Hi akis mpitsou, welcome to my channel. I like to check with you, can you launch your L-Connect 3 app, click on Settings and check if Auto-Run on boot and Minizmize L-Connect 3 to system tray at close are enabled. Also when you've done up your profile. you will be able to save your profile by exporting it to a physical file, just go to the dashboard (exmaple effects for your fans or strimer plus), on the top right you should have export and import.. use the export to save your settings and if in the event, it's mess up during operation, you can always import back your settings.
@akismpitsou3406
Жыл бұрын
Hello friend, thanks for your message😊. My settings are both enabled as you mentioned with L Connect. I tried a few times to export my favorite RGB custom settings and import when things messed up but it never restored my favs. It always works on default settings. Its like auto syncing everytime. I have customized each strimer one by one with meteor and when the exe runs it restores everything to the defaults. If i use general lighting effects theres no problem. Only with solo strimers customization..
@JP_Kix
Жыл бұрын
I have the 12vhpwr v2 strimer and the 24 pin v2 strimer. Problem is i cant even get them to light up or even show up in l-connect 3. Are they not compatible?
@KleoYan
Жыл бұрын
Hi JP Kix, welcome to my channel. Do a basic check, are you able to see the controller under device manager? if yes, you might want to do a manul firmware update. You might want to refer to this content kzitem.info/news/bejne/pJ2s24l8npiXa4o I do understand is lenghtly but take your time to digest and to understand how it works.
@JP_Kix
Жыл бұрын
@@KleoYan when i check under "device manager, the only things to show up are "6K7750" "Aura LED Controller" "NZXT Kraken Elite"
@Emx3ms
3 ай бұрын
What happens if there is “!!” Marks
@KleoYan
3 ай бұрын
Hi Emily Blondell, welcome to my channel. If your Universal Serial Bus Devices under the device manager of Windows is giving you exclamation mark "!" it means that your windows did detect a device but do not have the proper driver chipset to install it. I would advise to change the USB Port and try again.
@idubbzz7790
2 жыл бұрын
kleo why dose my stimmers show up as sl fans in l connect
@KleoYan
2 жыл бұрын
Hello i dubbzz, welcome back, your strimer plus is not plug to the Strimer Plus V2 contoller. You have plug your strimer plus strips to the uni controller, that's why you do not have the strimer plus effects on L-Connect 3.
@lain1178
9 ай бұрын
Hi, I bought 3 lian li fans, the first is a Lian Li UNI FAN SL-INFINITY 120 RGB (No controller included) and the other two are Lian Li SL Infinity 140mm (Without Controller). I connect the fans to the following fan hub: "Thermalright ARGB Fan HUB", that hub is connected to my B650E-F motherboard. The fans work, they turn on the default RGB, but in the L-CONNECT 3 program the fans do not appear so I cant control the RGB and RPM. What did I do wrong? What I can do? all the best.
@KleoYan
9 ай бұрын
Hi lain, welcome to my channel. Lian Li uni fans do not work this way. You need to have its own Uni controller/hub to work with L-Connect 3 application, as there are specific firmware on the Uni controller/Hub. You can’t just use other brand hub.
@lain1178
9 ай бұрын
@@KleoYan I understand, but if the uni fan-sl-infinity I bought them separately which means they didn't come with the controller, what option do I have? Because I was looking and I can't find that controller to buy separately, Only the pack of three fans is the one that comes with the which was not the one I bought, since I got all 3 separately. . I forgot to mention that I have the lian li strimer V2 (controller included) and they do appear in the L3-CONNECT (Ver 1.74)
@KleoYan
9 ай бұрын
@@lain1178 Hi, that's for sure as there is a strimer plus controller. as for the SL Inf controller, not sure if you can see this www.aliexpress.com/item/1005004600755700.html (Black) and www.aliexpress.com/item/1005004600649607.html (White)
@seb9925
6 ай бұрын
Great video👍! I do have one question if you can help me: can I connect 2 L-connect-3 hubs (3 fans in each controler) and a strimer v2 hub (24-pin cable and 8-pin gpu cable) into a single ARGB header on the motherboard with a splitter? Or would that be to much for the header?
@KleoYan
6 ай бұрын
Hi Sebastian Oana, welcome to my channel. Yes you can do that as all the argb devices are drawing current from it's controller. Just make sure that the sata source are plug to your various lian li controllers.
@seb9925
6 ай бұрын
Awesome, thanks!!😊
@KleoYan
6 ай бұрын
@@seb9925 most welcome. All the best with your build too 😉
@markhowell183
7 ай бұрын
Hi Kleo, I'm about to start building my PC using an ASUS Z790-Pro MB, with all Lian Li fans and an AIO cooler. My question is about Aura Sync and enabling the Lian Li fans to use Aura sync, rather than L-Connect 3. Is that possible through the L-connect 3 settings? Thanks, Mark.
@KleoYan
7 ай бұрын
Hi Mark Howell, welcome to my channel. Yes you can do that, you will still need the Uni control and L-Connect-3 though. Also make sure to connect the 3pin 5V ARGB cable between the Uni controller to your motherboard ARGB header. Once you did these, in l-connect you have to set sync to motherboard under Quick/Sync lighting menu and enable sync to motherboard.
@markhowell183
7 ай бұрын
That is exactly what I need to know. In my case, I will have 2 controllers, 1 for a 3 pack of fans, and 1 for the AIO, so as long as both of those are connected to an ARGB header, I should be good? Thank you for the quick reply, I appreciate it.@@KleoYan
@KleoYan
7 ай бұрын
@@markhowell183 my pleasure and you are most welcome. Yes that’s correct. All the best with your build too. 😉
@kanj1
6 ай бұрын
Really nice video! I will install soon several tl lcd + normal ones so if i understood everything (i am French :D) i dont need to use pwm and argb 5v ports because usb will do the job if i go through Lconnect3, right ? Thank you very much
@KleoYan
6 ай бұрын
hi Ji M, welcome to my channel and yes you are correct. L-Connect 3 will control the argb and fan pwm.
@kanj1
6 ай бұрын
@@KleoYanThank you very much !
@KleoYan
6 ай бұрын
@@kanj1 you are most welcome and all the best with your build too.
@axie1019
6 ай бұрын
i have a question about Lian li Galahad AIO LCD infinity. the L connect 3 is only allowing me to set rgb loop number to 50 max. and my 3rd fan in aio only lights 1/3 of the side rgb pannels. Do you know how to fix it?
@KleoYan
6 ай бұрын
Hi Axie 101, welcome to my channel. Just to check. Are you able to control the ARGB effects and to control the lcd? As for the Inf 120 fans where do you plug it?
@axie1019
6 ай бұрын
@@KleoYan I did not build the pc. I am able to control argb effects and lcd.
@KleoYan
6 ай бұрын
@@axie1019 I see, reason I asked is. For the SL-INF version of the GA II LCD. It comes with the Uni controller. Therefore you need to have two usb cable plug to the motherboard usb 2.0 header. I would advise you to go back to the person who build your pc to troubleshoot for you. Or check on L-Connect 3 app. Under settings and devices. Are the fans connected to the controller all highlighted or?
@ElemXCR
Жыл бұрын
Hey, have you any idea how to resolve an issue with the Lian Li L-connect 3 software that is causing a "gradual" freeze on my entire PC? It's like a lock-up but nothing is responsive. I can't open things or do other things that requires write/read. So if my browser already loaded up a page, I can scroll and continue browsing, but I can no longer see anything new like clicking on a link or part of the page that wasn't loaded will not be loaded. Task manager and other monitoring programs would cease to function and display only the last known result before the freeze. My system clock would also freeze at the time it starts. I've uninstalled the software and haven't had the freeze now. I've troubleshoot this all the way down to the list and narrowed it to either the mobo faulting or something else like software. I came to the conclusion that it was the L-connect 3 that is causing it occur randomly. The software works, I'm able to see accurate reading of the temps and rpms of the fans. I'm able to adjust the RGB of my fans and strimer v2. However if I have that program up, it will eventually gradually freeze my PC. Sometimes it will happen as soon as I finish booting up, when its automatically started up. Sometimes it would go on without it occurring for 10+ hours, or a day or two. It's totally random. All I know is after I've uninstalled the software, its been smooth sailing. I'm using just two Lian Li controllers, the one for the SL v2 fans, 9x and one strimer v2 mobo cable. Mobo is an Asrock X670E Steel Legend, and cpu is a ryzen 7800x3d. My software installation was on the primary OS ssd, which is connected directly to the CPU, not sure if that could cause an issue. Thanks for the help if you could provide. I've looked all over google and so far I've been people describe the same situations but they all have different specs. None of which had proper solutions. My PC was just built almost a month ago just for more info.
@KleoYan
Жыл бұрын
Hi ElementXCR, welcome to my channel, after reading what you've gone through and all the troubleshooting steps which you've provided.I like to check a few things if you don't mind. 1) What's the version bios of your X670E Steel Legend? 2) What are the USB devices connected to your system? I do have emails from viewers they are having issues. I told them to update the bios first and follow by reducing excessive USB devices which are connected to their system. you might want to try narrow down this. if it still does not help, I would adivse you to reach out to Lian Li tech support. lian-li.com/faq/
@ElemXCR
Жыл бұрын
nevermind... the PC froze again after reinstalling L connect 3 then closing the program. I used the bypass cable so the mobos can directly do the fans and RGB without the need for L-connect. And it froze randomly still. I guess there's a much more underlying problem on my PC... Ahh well, thanks for the reply and assistance.
@KleoYan
Жыл бұрын
@@ElemXCR you are most welcome. My guess is leakage of current. If you use too many usb devices. That’s the cause of it, as what I have experienced so far
@ArtfromHell
Жыл бұрын
Chipset update helped, thank you
@KleoYan
Жыл бұрын
Hello SweetDralinHoneyLove, welcome to my channel. That's good to hear and thank you for your feedback.
@sagittarius_rf
10 ай бұрын
Is the fan controller suitable Lian Li Uni Fan SL120 V2, to the fans LIAN LI UNI FAN SL-INF 120 REVERCE BLADE? Thank you.
@KleoYan
10 ай бұрын
Hi Сергей Киселёв, for the SL 120 V2 controller, there is a sync port 2 and 4 which you can use to plug the SL-Inf 120 reverse fans but the effect will not be ideal. It will be better to use the SL-Inf 120 Reverse with the SL-Inf controller.
@sagittarius_rf
9 ай бұрын
Thank you@@KleoYan
@KleoYan
9 ай бұрын
@@sagittarius_rf you are most welcome and all the best for your build 😉
@NOWy070
Жыл бұрын
Hi there ;) any fix for auto run not working yet? Everything is up to date in my rig, im using l connect 3 from 2 months and everything was working perfectly until yesterday. I turn on my PC and the app didn't start automatically, checked evry setting and all was just like before when it was working. Reboots did nothing. Reinstalled he app a couple if times, manually make shortcut in autostart etc... From all te setting the app shuld auto run but it doesn't. Spend like 6h to try to make this auto run whit system boot but i couldn't. Please help, this is not letting me sleep 😅
@KleoYan
Жыл бұрын
Hello Michat Brzozowski, welcome to my channel. Two things you can do. Uninstall the app using revo uninstaller and to delete all files and registry which revo can do. Then download the l-connect 3 app again from the official website. If reinstall does not work, go to task manager and under start up application, see if L-Connect 3 is enabled. If all these don’t help. I suggest you to contact lian li support or to post your problem at lian li Reddit forum www.reddit.com/r/lianli/
@NOWy070
Жыл бұрын
@@KleoYan thx, I'll try this revo tool tomorrow after work. Of course will let you know if it worked ;)
@KleoYan
Жыл бұрын
@@NOWy070 welcome. All the very best. Now of get some rest.
@Wamdahouncho
9 ай бұрын
when i go to fan/pump my rpm stays at 0 just built my pc any1 can help?
@KleoYan
9 ай бұрын
Hi Heal Tears, welcome to my channel. Have you gone through the whole video content and to do your basic troubleshooting? Kindly do not miss any of the steps. You will first need to get your controller recognized in windows, under device manager in Universal Serial Bus Devices.
@Wamdahouncho
9 ай бұрын
its showing it saying its working properly when i get off work ima make sure its plugeed in rite @@KleoYan
@chr4me
7 ай бұрын
Hi, my fans went full speed from the software. I had to switch controllers to stop it from spinning at max rpm. How do I prevent this from happening again?
@KleoYan
7 ай бұрын
Hi chrome, welcome to my channel. did you check if your device is listed in device manager?
@chr4me
7 ай бұрын
@@KleoYan Yes it is listed as lian li unifan.
@KleoYan
7 ай бұрын
@@chr4me ok try this. 1) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version. 2) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html 3) Remove all argb apps (Asus Armory Crate / MSI Dragon Center / Giga Fusion / Asrock Polychrome). If the brands which I have mentioned, do have a uninstall tool like the Asus Armory Crate, use that, else use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller kzitem.info/news/bejne/1oOdu42fmp2hq4I 4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second 5) Plug Uni controller with one fan 6) Plug the power cable and turn on your PC 7) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni controller 8) Install the L-Connect 3 app only lian-li.com/l-connect3/ 9) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON. 10) Reboot your system. 11) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed. 12) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 13) and proceed step 15) 13) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again. 14) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses) 15) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.
@mobindonyadideh
10 ай бұрын
hey bro . i have a question . if im just going to control my 360 sl argb fans using motherboard , can i remove usb cable from my hub ? i mean i connect only sata and 5v rgb headers cable. please help me.
@KleoYan
10 ай бұрын
Hi mobin donyadideh, welcome to my channel. Nope you will need to connect the USB cable to the uni controller, else you can't control the fan's argb even if you have installed the L-Connect 3 app.
@mobindonyadideh
10 ай бұрын
tnx for answering bro . i have z790 asus rog h and connected lian li galahad 360 sl into my motherboard. but windows says the usb device is not recognized. even in device manager i see a yellow alarm on this usb device. i remove and plug the usb calbe so its fine but after 5 minutes it saying usb not recognized . over and over. my bios is updated . i have testet all 2 usb 2header ports on my mainboard. and issue still exist. do you have any idea ? @@KleoYan
@KleoYan
10 ай бұрын
@@mobindonyadideh have you install the chipset driver of your motherboard? I assume is this motherboard. if it is have you install this? Intel ME Consumer V2334.5.1.0 (SW 2335.5.26.0) For Windows 10/11 64-bit. rog.asus.com/sg/motherboards/rog-strix/rog-strix-z790-h-gaming-wifi-model/helpdesk_download/ if you have done this and it still shows the the same error, it could be 1) insuffient power to your uni controler 2) the USB cable that comes with your uni fan is faulty or 3) the uni fan controller is fautly. It that's the case, kindly contact Lian Li support to aid you. lian-li.com/contact-us/
@CallMeFearS
Жыл бұрын
I have Lian li galahad UNI SL edition aio 360mm and there have 1 controller which i plug all my 3 SL fan in it. I want to know if i buy 3 set of UNI SL v2 can i plug this normal UNI SL 3 fan on that new v2 controller? is it work or do i need to separate controller to control UNI SL normal and UNI SL v2?? I only have 2 USB hub on my motherboard, One i connect Lian li strimmer v2 controller and galahad uni sl controller.
@KleoYan
Жыл бұрын
Hi I think I have answered your question. Nope they have to work with their own uni controller.
@CallMeFearS
Жыл бұрын
@@KleoYan do you have any discord i want to show you there is this USB hub extension for motherboard is it work or not.
@KleoYan
Жыл бұрын
@@CallMeFearS nope I dont use discord. sorry, you can send me to my email at godzylatech@gmail.com
@DpHo888
7 ай бұрын
If you’re using the usb connectors with controller, do you have to use the RGB and fan header connector as well?
@KleoYan
7 ай бұрын
Hi DpHo888, welcome to my channel. nope you dont have to connect the argb or pwm connector between the hub and motherboard headers. Unless you intend to make use of motherboard utlity to control the fan's pwm and argb effects.
@DpHo888
7 ай бұрын
Thank you. I plan on using the L connect 3 as you did in video. This is a relief! Thanks for your video, it’s very informative!
@KleoYan
7 ай бұрын
@@DpHo888 you are most welcome and all the best with your build. 😉
@ganshengkai7060
Жыл бұрын
Can I connect Deepcool Castle 360EX ARGB pump rgb cable to lian li uni hub and use L connect to control the pump rgb light?
@KleoYan
Жыл бұрын
Hi gan shengkai, welcome to my channel. If you have the convertor, I dont see why not. but do note if you plug your aio pump argb, dont expect to have a specific pattern to it. as what you are connected to on this uni controller are meant for the effects for the uni fans.
@ganshengkai7060
Жыл бұрын
@@KleoYan Thanks for the reply!! Why need a convertor? Is it because not universal unless I use Galahad aio pump? I decided to use DeepCool Castle 360EX A-RGB and change all the fans to Uni fans. I know some software can sync all the Uni fans and pump RGB but don't know whether the L-connect works or it only can control the Uni fans except the Deepcool pump RGB.
@KleoYan
Жыл бұрын
@@ganshengkai7060 for deepcool the argb is a standard connector, the uni controller is not. thats why you need a coverter. as for other application to controll, you can do that, but you will still need the L-Connect application installed and to set to by pass, in order for you to use other application to control the argb effects. kindly do not ask me how it's being done on other argb application or controller, as I only focus on Uni fans and it's controller, plus i do not have other controllers to explain. thank you!
@raindropdroptop3169
Жыл бұрын
So to power up the cables, use the argb, and the l connect software I just have to connect the usb 2.0 header to the motherboard? There is a cable that is optional for motherboard sync and I don’t have that plugged in because I am not sure what it does. Is it alright to leave it unplugged?
@KleoYan
Жыл бұрын
Hi Rain Drop Drop Top, welcome to my channel. This video might assist you though it’s old content but it’s the fundamental of how uni fan works kzitem.info/news/bejne/s6Noy6Gbsn-GdKA . You are not wrong when you’ve said just to connect these inorder for it to work that is to connect the sata cable from the psu to the uni controller, the usb cable between the motherboard to the uni controller and you don’t have to plug the cable that goes to your mother fan header and argb header.
@raindropdroptop3169
Жыл бұрын
@@KleoYan Awesome, thank you for the quick response and answer. The video you linked was very helpful!!
@KleoYan
Жыл бұрын
@@raindropdroptop3169 you are most welcome. infact i will share with you my playlist kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm. Anything you need to know about these uni fan, you can refer to. just need to take note of the title that says [L-Connect], they are the version of the L-Connect .. exmaple Lian Li Uni Fan AL120 - The Controller [L-Connect 2]
@cryptojohnny7781
Жыл бұрын
PERFECT! love the new L-Connect 3 app , wish it worked for the damn Kraken water cooler . Tkx
@KleoYan
Жыл бұрын
Hi Crypto Johnny, welcome to my channel. Yes it will be perfect if you only use Lian Li's argb ego system. If you add on other argb devices, thats where things starts to get complicated.
@lucasduran6753
Жыл бұрын
Hello man, great video bro. Can you tell me if I can control the argbs of the lian li infinity fans without connecting the controller to the usb connection, just with the argb connector on the motherboard?
@KleoYan
Жыл бұрын
Hi Lucas Duran, welcome to my channel. You can do that with a individual pack. If you get the tripple pack, it will not be possible. If you do get individual pack, make sure not to daisy chianed more than 3 fans to each of your motherboard fan header, as each of your motherboard fan headers have a load limitation.
@lucasduran6753
Жыл бұрын
@@KleoYan In this case, I will need a USB extender for the motherboard, right?
@KleoYan
Жыл бұрын
@@lucasduran6753 it greatly depends on how many controller you intend to plug to your motherboard, but if you do need a usb extender, I would advise you to get this instead of the NZXT internal hub. www.aliexpress.com/item/1005005121350909.html
@joe5940
Жыл бұрын
hope you can help I have 10 fans 7 lian li v2 and 3 v1 when I try to sync them to 1 static colour some of them are blue and some go green and red? I noticed your sl fans done it to when static was applied. also every time I connect to lian connect it turns off my lian li cooler rgb
@KleoYan
Жыл бұрын
Hi Joe, welcome to my channel, though you have listed out the V2 and V1 fans, just to confirm, are your fans SL120? also may I ask how did you do the connections?
@joe5940
Жыл бұрын
@Kleo Yan thanks for the reply, yeh they are the sl120 fans. and connected them to the hub and not through the mother board. both hubs are connected to 1 sata cable
@KleoYan
Жыл бұрын
@@joe5940 I see. Is your controller usb cable connected to the motherboard. If it is, check to see in windows. Does the uni fan controller shows under Universal Serial Bus Devices?
@vuhoangthuan326
Жыл бұрын
No VGA fan speed be synced and the app always pops up when PC wakes up from sleep, that's what I got with L-Connect 3.
@KleoYan
Жыл бұрын
Hi Vu Hoang Thuan, welcome back, L-Connect 3 does not control your GPU fans, it will only monitor the temperature. as for your error, I have no idea why it pops up. have you try swaping on L-Connect 3 PWM dashboard to monitor CPU instead of GPU?
@vuhoangthuan326
Жыл бұрын
@@KleoYan Thanks for your quick response. In fact, my L-Connect 3 app was set to sync with CPU, not GPU.
@KleoYan
Жыл бұрын
@@vuhoangthuan326 I see. Have you tried re-installing the L-Connect 3. Before you re-install it. Totally remove the app using revo uninstaller. See if it works.
@XeqtrM1
9 ай бұрын
sorry this is bit late to ask but how do i change color on the front strip of the lian li o11d xl like custom change not just preset`?
@KleoYan
9 ай бұрын
Hi Muzubi, welcome to my channel. Kindly read page 9 and 10 of the O11D XL manual, drive.google.com/open?id=1myDv0AMlZhTWNlwcBo7HFgBXrhSuX3MT - Mode 8 Lighting Effects: 1. 1st-7th: MCU Built-in Lighting Mode 2. 8th: Sync Up the ARGB Lighting With The Motherboard (1) Connecting The Header To The Motherboard (2) To Turn Off The Lighting, Press The Button For 3 Sec. To Turn It On, Press Again For 3 Sec
@XeqtrM1
9 ай бұрын
@@KleoYan thanks so much :) w8 is it in manual you get?
@KleoYan
9 ай бұрын
@@XeqtrM1 I do not own a O11D XL case but I view the manual from Lian Li’s official website.
@ViciousXUSMC
Жыл бұрын
I fusing the L-Connect 3 software to control your CPU & GPU fans (AIO Coolers) rather than connecting those fans headers to the motherboard. In the software you can say "This group is controlled by CPU/GPU temps" but what happens in BIOS, or even a dual boot system with an OS that doesnt run the software? Will those fans run automatically from the signal from the pass-thru connection of the controller, run at full speed, or not run at all?
@KleoYan
Жыл бұрын
Hi Vicious Computers, welcome to my channel. For your case, it will run at silent mode and does not pickup from your bios even if you did plug the cable between the controller to your motherboard PWM fan header.
@ViciousXUSMC
Жыл бұрын
@@KleoYan Ok, good to know. I'll need a few single fan cables that break out to the separate aRGB and PWM Fan connection then will put them on the controller in a sync port and plug the fans into the motherboard directly most likely. I do not dual boot linux anymore I just use WSL or use a VM and in bios silent mode would be good enough due to the low demand on the system, but kinda still "better safe than sorry" Just would be nice to control everything from one place and not need another software for those fans.
@vigilante9259
Жыл бұрын
Hi, awesome video but I have a question, I got infinity fans and how can I control them using motherboard bios? As I see an argb port but not pwm port so I'm confused on how to do it, I got an asus motherboard.
@KleoYan
Жыл бұрын
Hi Vigilante, welcome to my channel. if you have the argb and fan cable connected between your uni fan controller / hub to your motherboard, in L-Connect 3 app, set to motherboard mode on at Quick Sync Lighting. as for your motherboard to control, you might need your motherboard utitlity, example Armory Crate for Asus, Mystic for MSI or Fushion for Gigabyte or Ploychrome for ASRock.
@vigilante9259
Жыл бұрын
@Kleo Yan yes i already did that, thanks for the reply.
@KleoYan
Жыл бұрын
@@vigilante9259 you are most welcome.
@michealstark6091
Жыл бұрын
So if i connect 2 unifan hubs and 1 for the strimercables on the nzxt hub with all the sata cables correctly the Lian li software will detect the 3 controllers without any issues right?
@KleoYan
Жыл бұрын
Hi Michael Stark, welcome to my channel. That is correct., just a side note, do it in a way, one piece at a time and to test them on l-connect 3 applications. If you follow the steps in this video, you will get all running at no time.
@michealstark6091
Жыл бұрын
Thank you so much for the answer, video really well done. So I'll add one controller at a time and do the derivative updates step by step. Hope to fit the controllers inside the Lian Li Dynamic EVO 😂😅
@KleoYan
Жыл бұрын
@@michealstark6091 you are most welcome and thank you for the compliment. All the best with your build. 😉
@alexcarapia7218
Жыл бұрын
l connect is not detecting aio or fans
@KleoYan
Жыл бұрын
hello alex carapia, welcome to my channel. did you check the connection properly and did it not detact your uni controller in windows 10 or 11 device manager. kindly provide more info, as I am not able to guess what's your issue.
@LucidiousMaximus
9 ай бұрын
Heaven benchmark does not show cpu temps…not sure how you did that
@KleoYan
9 ай бұрын
Hi Blake Rupley, welcome to my channel. I use HWinfo64 OSD functios and Rivertuner to project on heaven
@LucidiousMaximus
9 ай бұрын
@@KleoYan thx for the reply. Ok that makes more sense now lol. Thx
@KleoYan
9 ай бұрын
@@LucidiousMaximus most welcome
@peterjoy1713
Ай бұрын
Noted on not to mix & match. But can I have 120mm TL and 140mm TL connected to a single TL controller? I'm not sure if fan size matters for controller even though they're of the same TL fans. Very informative vid!
@KleoYan
Ай бұрын
Hi Peter Joy, welcome to my channel. So long your daisy chain set is to one port, you will not have an issue. Example Port 1 are all 120mm TL fans and port 2 are all 140mm fans. Not forgetting once you have done that, go to your L-Connect 3 app and set the fan profile for 140mm to it's 140mm profile.
@peterjoy1713
Ай бұрын
@@KleoYan Brilliant, many thanks!!
@KleoYan
Ай бұрын
@@peterjoy1713 you are most welcome. All the very best with your build too. hmm maybe this might aid you further as a number of my viewers benefit from it. It's not about MX6 thermal paste but more on how I apply paste which to me 98% with good results. kzitem.info/news/bejne/2ZBouGioqHhikoY. the trick is, you do not need thick layer of paste, just a thin layer and sufficient enough for your coldpate to contact the full surface of the IHS.
@peterjoy1713
Ай бұрын
@@KleoYan Yes! I had been doing the same application method (with painter's tape) on my previous builds. Though I've been doing away with thermal paste as of late and having great success in using PTM7950 instead, surprisingly. I initially experimented with repasting my laptop with good result in bringing temp down. Then I went to my PC and re-pasted my CPU and GPU. It has been about 4 months since application but here's the before -> after results as of today: CPU avg 59.6 C -> 47.5 C. CPU max 75.1 C -> 64.1 C. GPU avg 33.0 C -> 28.0 C GPU max 35.0 C -> 29.0 C. GPU hotspot avg 43.5 C -> 38.8 C GPU hotspot max 46.5 C -> 39.4 C. I'm curious if these results stick over time which I hope so. I will keep monitoring. My new build will likely use PTM7950 as well. Thanks again! I am subscribed and looking forward to seeing your next contents!!
@KleoYan
Ай бұрын
@@peterjoy1713 Oo PTM7950 is excellent for heat absorption. You won’t have to worry as it will last extremely long 👍. Thank you to have subscribed.
@TheMRPHILLIPSTV
2 жыл бұрын
awesome video. we need a video on MB sync. example: connect L3 with aura Sync , rgb Fusion ect ect . thanks in advance.
@KleoYan
2 жыл бұрын
Hello MR. PHILLIPS, welcome to my channel, thanks for the compliment and I will see what I can do with your request. thank you!
@TheMRPHILLIPSTV
2 жыл бұрын
@@KleoYan Thank you in Advance.
@jimhamilton6615
2 жыл бұрын
Very informative instructional video Kleo. I own 6 Lian Li UNI Fan AL120 , 3 Lian Li UNI Fan SL-INF 120 RGB Infinity Mirror Fans , 2 LIAN LI Strimer Plus V2 ,and the Lian Li Galahad AIO 360 RGB UNI Fan SL120 with 3 Lian-Li controllers in my ROG MAXIMUS Z690 HERO and now I understand how to connect every component together with the NZXT Internal USB Hub 3. The only problem is I own Corsair Dominator platinum RGB ddr5 ram that doesn't sync with the L-connect 3 software so I use the Asus motheroard plug to bypass L-connect 3 and every component syns with Asus Amory Crate. Thanks for a great channel !!!
@KleoYan
2 жыл бұрын
Hi Jim Hamilton, welcome back, yup there are still other argb stuff which I am not able to resolve as I have tried writing in to Corsair and NZXT for sponsorship. But none replied, that’s why this vid title is meant for all pc builders using lian li products. Nevertheless thank you for your support👍
@erenyeager05
Жыл бұрын
Thanks this fixed my problems🙌🏽
@KleoYan
Жыл бұрын
Hi Eren Yeager, welcome to my channel and I am glad this content does aid you in some ways. 😉
@mamuvinyl6181
Жыл бұрын
Im using Lancool 215 casing but using an old ATX mobo. Is it possible to connect the software through my mobo?
@KleoYan
Жыл бұрын
Hello Mamu Vinyl, welcome to my channel, you will need the uni controller to use the L-Connect 3 application.
@mamuvinyl6181
Жыл бұрын
@@KleoYan the unicontroller can be connected to the Lancool 215 argb/fan hub and the the uni controller will be connected to board usb right?
@KleoYan
Жыл бұрын
@@mamuvinyl6181 for the Lancool 215, yes.. connect the argb to this uni controller and then connect to your motherboard USB header. but on the 215 controller, you will need to set by pass mode inorder to pick up the argb effects from the uni controller, which the uni controller is picking up the argb instructions from L-Connect 3 application.
@mamuvinyl6181
Жыл бұрын
@@KleoYan thanks for the reply although im not seeing on what should I do. Plan to get the strimer plus V2 set and then think again on what you have guided.
@tj-hero
6 ай бұрын
i just bought sl140 and the rgb didnt work :'c
@KleoYan
6 ай бұрын
Hi tj-hero, welcome to my channel. You mean if you plug the fans directly to the motherboard argb header, it does not work or?
@tj-hero
6 ай бұрын
@@KleoYan i used there hub and its not working and its for really few times its lit half fan and the other not lighting at all and its some times randomly flickers for once or twice times, i believe my hub is broken :c i really appreciate your concern :3
@KleoYan
6 ай бұрын
@@tj-hero I see, if that's the case, contact Lian Li support to have your controller fix lian-li.com/contact-us/
@kAmAt1zZ
4 ай бұрын
Still the strimmer doesn't show up in my l-connect 3
@KleoYan
4 ай бұрын
Hi, welcome to my channel. May I ask which version of strimer plus did you purchase and did you check on your windows device manager, if the strimer plus controller is detected under Universal Serial Bus Devices?
@kAmAt1zZ
4 ай бұрын
Mmm.. not really but i got the strimmer plus not the v2.
@KleoYan
4 ай бұрын
@@kAmAt1zZ the controller of the non V2 does not work with L-Connect 3 app. you will need the V2 controller to do this. You can purchse the V2 controller and use your strimer plus non v2. www.aliexpress.com/item/1005004239607087.html?pdp_npi=4%40dis%21SGD%21SG%24%2028.69%21SG%24%2028.69%21%21%2120.55%2120.55%21%402102f67717152280494758043e1bdb%2112000031743391281%21sh%21SG%210%21&spm=a2g0o.store_pc_allItems_or_groupList.new_all_items_2007601292652.1005004239607087
@user-sx5tq2yb7y
11 ай бұрын
when i open L-connect 3 it only shows system info and settings how do i fix
@KleoYan
11 ай бұрын
hello r, welcome to my channel, have you gone through this content in and out? did you see anything under the Universal Serial Bus Devices in windows?
@user-sx5tq2yb7y
11 ай бұрын
i found out what i was doing wrong thank you so much!!!!@@KleoYan
@KleoYan
11 ай бұрын
@@user-sx5tq2yb7y ah ok. glad everything work out for you now.. enjoy.. 😉
@mikaelbackstrom
Жыл бұрын
Great video, would have saved me some time when I started with the Lian-Li fans and software. Is there a way to control the RGB effects so they continue from one set of fans to another on the entire controller? I only manage to change it within one "bank" of 4 fans.
@KleoYan
Жыл бұрын
Hi Mikael Bäckström, welcome to my channel. For this you will be able to control the pattern within the Lian Li argb products as they are cater for only the uni fans and strimer plus in L-Connect 3 (Quick Sync Lighting). If you are talking about having your rams and GPU, that's not possible. Once again thank you for your compliment and feedback.
@gagansaurav00
Жыл бұрын
Can I connect SL fan to SL V2 controller and sync lighting.
@KleoYan
Жыл бұрын
Hi Saurav Brahma, welcome to my channel. Though SL and SL V2 shares the same lightings but they have different RPM profile. What you can do is to connect the SL to the ARGB Sync 2 or Sync 4 port for argb effects, else the PWM connector to your motherboard fan header directly and to use the motherboard UFEI or motherboard utitlity app to control the fan's RPM.
@gagansaurav00
Жыл бұрын
@@KleoYan Will see after I receive my product. Thanks
@KleoYan
Жыл бұрын
@@gagansaurav00 you are most welcome. All the very best with your build too😉
@everythingbenny
Жыл бұрын
Hi, my fans won't light up or spin when booted. Any ideas?
@KleoYan
Жыл бұрын
Hello Benny Gomez. Welcome to my channel. I have no idea unless you can provide proper details. Example did you test them outside your case and with each individual fans? Was the sata cable connected. Is your device manager identifying your controller and what fans are those? Which motherboard and platform are you using?
@everythingbenny
Жыл бұрын
Hi Kleo, yes I have a z690-a rog strix asus mobo, I have plugged in the two sata cables to different sata plug ins. My device manager recognized the controller hub but the fans won't boot up
@KleoYan
Жыл бұрын
@@everythingbenny you mean when you plug to the controllers, the fan wont spin nor light up even before your PC boot to Windows OS? As I have asked you did you try testing each indivual fans without daisy chained? by right if you connect them correctly, even without pluging to the usb cable between the uni hubs to your motherboard usb header. it should at least light up default rainbow color.. and have you installed L-Connect 3 app?
@hikyubeast
6 ай бұрын
Hi Kleo! Really great videos as I am trying to troubleshoot my rgb case but none seem to have worked for me in terms of Lian Li's Dynamic Evo case RGBs, not sure if you have come across this issue before? Thanks!
@KleoYan
6 ай бұрын
Hi Hikyubeast, welcome to my channel. Maybe list down what are the lian li argb products and to let me know what kind of liquid AIO or air cooler, inclusive of your motherboard you are using. Then I will try to help you out. if you need to show me pictures, you can send to my email @ godzylatech@gmail.com
@hikyubeast
6 ай бұрын
Appreciate it!!
@KleoYan
6 ай бұрын
@@hikyubeast most welcome.
@hikyubeast
6 ай бұрын
@KleoYan sent under Ryan thank you! The bottom rgb strip only a portion seems to be lighted. Thank you
@KleoYan
6 ай бұрын
@@hikyubeast check your email, I have replied. 😉
@thelopez0194
Жыл бұрын
I have “3” 3 pack infinity fans so 9 total. I use only one hub instead of 3 hubs. Would that be why l connect isn’t recognizing my fans ? I have the strimmer v2 on its on hub as well but nothing pops up in the l connect 3. Everything does light up and work but not recognizing in the software. I’m running gigabyte x570 master
@KleoYan
Жыл бұрын
Hi TheLop3z, welcome to my channel, did your OS detact the uni controller? that will be the first part. maybe go through these steps and kindly do not miss any of the steps. 1) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version. 2) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html 3) Remove all argb apps as for your case is Gigabyte fushion, use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller kzitem.info/news/bejne/1oOdu42fmp2hq4I 4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second 5) While waiting, disconnect all devices that are connected to your motherboard (front / back IO). Leave only your Keyboard, Mouse , Monitor and Ethernet (If you have) connected directly to your motherboard. If your monitor has a KVM build-in, remove the USB cable from your monitor to your motherboard USB socket. If your mouse and keyboard are connected to your monitor, please remove them and plug them directly to your motherboard instead. 6) Plug only one Uni controller or Strimer Plus V2 controller. If its for Uni Fan (SL/AL) use only 3 fans to an output of the uni controller. 7) Plug the power cable and turn on your PC 8) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni / strimer plus V2 controller. 9) Install the L-Connect 3 app only lian-li.com/l-connect3/ (current version 1.3.16) 10) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON. 11) Reboot your system. 12) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed. 13) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 14) and proceed step 16) 14) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again. 15) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses) 16) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.
@marcvwest
Жыл бұрын
When is Lian Li going to release a multi pack version with controllers of thr SLINF140 fans in the US, the product has been released for 3 months now, but doesn’t seem to be showing up on any websites, AliExpress, or even ebay.
@KleoYan
Жыл бұрын
Hello Marc West, welcome to my channel. I believe is due to shipment delays as due to holidays over at China and Taiwan (Lunar New Year).
@ten.kenobi
Жыл бұрын
im struggling to get a certain color using the LianLi L-Connect software, since there isnt a function to enter a HEX or RGB code (#d4af37 or 212/175/55). Instead u only have these stupid color sliders. i found a reddit post saying: "(L-Connect) fighting to get a particular color? Have the hex code? Convert it to HSB so you can match it in L-Connect". i wasnt able to do this. do u have any ideas or a work around to not use the color sliders?
@KleoYan
Жыл бұрын
Hi Ten Kenobi, welcome back. I can understand your frustration but I have no clue how to do that. I will give a quick feedback to Lian Li. See if they can do something about it.
@ten.kenobi
Жыл бұрын
@@KleoYan ohhh that would be awesome! Thx in advance ❤️
@KleoYan
Жыл бұрын
@@ten.kenobi you are most welcome. Hey are you able to copy and paste your comment to me and send it to my email at godzylatech@gmail.com so that I can 1) keep track 2) attached your email and send it to Lian Li. Thank you.
@ten.kenobi
Жыл бұрын
@@KleoYan ✅ done
@KleoYan
Жыл бұрын
@@ten.kenobi thanks. Got your email. I will proceed to send them an email and to attached your request. Thank you.
@gugakakhadze1131
2 ай бұрын
Thank You! It helped me to recognize strimmer plus v2 in the L-Connect3. Many Thanks to You!
@KleoYan
2 ай бұрын
Hi Guga Kakhadze, welcome to my channel. I am glad you have your strimer plus V2 sorted.😉
@joeleeman9886
Жыл бұрын
Hey im having 1 issue, I have 2 uni hub sl v2 connected and everything is working but I cant get the moving light effects to sync properly. Each controller's fans moves separately, any way to have my fans moving rgb effects move as if they are all one units?
@KleoYan
Жыл бұрын
Hi joe leeman, welcome to my channel. If you are using SL V2, your fans can do bridging which you can use 1 controller instead of two. this way you can sync up all the argb effects. For two control unit, it will not be able to do so. you can view this video on bridging kzitem.info/news/bejne/tHqOtGijn3dnpaQ
@quyrew
10 ай бұрын
If i connect all my case fans, so 7 SL 120 V2 using the UNI hub, will they power on upon first boot ? I've heard they won't spin until L-connect 3 is installed and firmware update.
@KleoYan
10 ай бұрын
Hi Quyrew, welcome to my channel. All uni fans which I have tested, they will spin upon boot. Profile will be loaded after windows up where the L-Connect 3 app kicks in.
@quyrew
10 ай бұрын
@@KleoYan but if its a new build without windows installed, will they not spin until L-connect is installed ?
@KleoYan
10 ай бұрын
@@quyrew when the controller is powered by the Sata. Whatever fan you plug to your controller will spin. Does not matter if there is windows or not.
@quyrew
10 ай бұрын
@@KleoYan okay thank you for the info
@KleoYan
10 ай бұрын
@@quyrew most welcome and all the best with your build.
Пікірлер: 803