Do you have a video where you explain how to use de touch setter? I working with a genos l250ii lathe amd i dont know how to use it
@FabianAchaval
6 ай бұрын
@gosigerwestapplicationstip7062 , is the simulation APP you used on this video available for selling? If so, what it is the part number to request a quote?
@2m-group_dk
4 жыл бұрын
Is this only possible on mills. Have a lb3000 osp-p300la but can't find the library button
@pocketcharleywithgosiger
4 жыл бұрын
It is only a mill feature unless you have the S control (Usually only on Multus and VTM Y-B machines). You can, however, make macro programs and label them .SSB
@vincentnguyen3887
4 жыл бұрын
Hi ! I saw line with ntc5 if [ pt ne empty] ntc6.....IS EMPTY SYSTEM VARIABLE OR LOCAL-VARIABLE, may I ask ?
@pocketcharleywithgosiger
4 жыл бұрын
Vincent, empty is a non-value indicating that either a common variable or a local variable has not been defined. You can’t simply put a 0 in the variable, since zero is a value in itself, so the word EMPTY is used
@vincentnguyen3887
4 жыл бұрын
Thank you for replying, I’m working on Okuma lb3000 exii. Osp p300L and create sub macro but somehow I can’t get it to work, I created program and named it “universal drill’ multiple ways cycle using same program , when control read the line IF[ PZ NE EMPTY] N1 then I got alarm sent out 2238-01 alarm b and I also tried IF PZ GOTO N1 as program manual book said and I still have alarm from the machine ....is there a way I can fix this ? Thank you very much .
@pocketcharleywithgosiger
4 жыл бұрын
@@vincentnguyen3887 that alarm occurs when you don't have the address listed for the conditional. In this case, IF [PZ EQ EMPTY] N1 is correct, but the alarm indicates you have no N1 to be found in the macro
@tuanvunguyen3870
3 жыл бұрын
can you send me the macros program
@maurocardenas7704
4 жыл бұрын
Nc code for drill cycle with lower turret on okuma osp 300
@pocketcharleywithgosiger
4 жыл бұрын
The same codes work for upper and lower, but you'll need to include the G14 code to specify the turret.
@maurocardenas7704
4 жыл бұрын
@@pocketcharleywithgosigerno really I got upper is g181 live tool spininig but lower tuuret don't work with g181
@pocketcharleywithgosiger
4 жыл бұрын
@@maurocardenas7704, is it a live tool on the lower or static tool?
@maurocardenas7704
4 жыл бұрын
@@pocketcharleywithgosiger can't be live tooling on lower turret is stationary too gum drill like17 Inch long
@maurocardenas7704
4 жыл бұрын
@@pocketcharleywithgosiger n is stationary tool gun drill featurecam post output g181 for upper turret g74 for lower turret I can't used g181 for upper turret
Пікірлер: 17