Just bought one today, the latch is one of the modifications I'll be doing. Great job keep up the good work.
@perssonsgarage
2 жыл бұрын
Thanks! See also - Modifying & Improving Part 2 - kzitem.info/news/bejne/mWmErXuXr6aWqm0
@franciscojavier4270
2 жыл бұрын
Very nice video!!! Thanks a lot for sharing.
@perssonsgarage
2 жыл бұрын
Thanks! See also kzitem.info/news/bejne/mWmErXuXr6aWqm0
@brentsmith5647
2 жыл бұрын
Brilliant video thank you
@perssonsgarage
2 жыл бұрын
Thanks!
@pawepakua5844
4 ай бұрын
Rzedzian! Mógłbyś przejść do rzeczy!
@laszlovona
3 жыл бұрын
Great minds use tools alike hahah 👍👍 ryobi, parkside everytime and some blue Bosch. Very nice, detailed video.
@philouw2633
3 жыл бұрын
Bravo vous venez d affaiblir la rotule ,qui n est deja pas assez rigide. j ai modifié l axe , je peut maintenant regler ,elle tient sans blocage et descend seule en basculant legerement .
@dimitrisfoti8962
Жыл бұрын
Rubber band saw tires, what size is the band? The Dewalt ones fit (outside 6 inches inside 5.7 inches wide 0.5 inches?).Thanks
@HCabuk
26 күн бұрын
Hallo. I have a problem. Since unboxing this thing my sawblade jumps out of the rolls. Did you ever had a problem like this? I changed the bandsaw blades against better once but no changes
@perssonsgarage
25 күн бұрын
I have never had it jump of, but check that the wheels are attached properly and that they are not warped. Tell me if you find a solution!
@HCabuk
25 күн бұрын
@perssonsgarage Thanks my friend. I tried everything. No changes. It runs for 10 or 15 seconds and jumps out. This thing was new. I have no clue. I tried everything in 2 hours. Even flip the side of the rubber band on the rolls.
@perssonsgarage
24 күн бұрын
If still under warranty, I would replace the machine. Must be something wrong with one of the wheels or axle. I wish you good luck!
@nstl440
3 жыл бұрын
Would it be possible to extend it and fit a longer saw?
@soundskribble
2 жыл бұрын
Are you happy with this saw? Looking at getting one but saw other reviews where it doesn't cut square! Cheers, great video!
@perssonsgarage
2 жыл бұрын
Thanks! I'm happy with mine and it saws straight, it's quality at a low price I think. On other saws I own is not always 0 where the arrow points, it is something you learn and can re-mark.
@Scott_A
Жыл бұрын
Also there is generally a bit of movement in the bolt holes so you can loosen them and try to make it square to the fence
@mohammedal-daini8790
Жыл бұрын
I have a problem with the straight cut.. There is an inclination in the cut in this way / approximately 1 millimeter or less
@Scott_A
Жыл бұрын
If the blade drifts while cutting then it is most likely from the weight of the machine pushing down too much, if you can hold it while cutting and let it down slowly it should cut better. Also, an Evolution S355 CPS chopsaw is much better at cutting most things. I was so amazed with the S355 CPS, it runs a tungsten carbide tipped blade, cuts very fast and straight. The S-355 CPS (Heavy Duty version with a cast base) is a much better saw than the R-355 CPS (Light to Medium Duty with a pressed steel base)
@JussPerfect
3 жыл бұрын
Really appreciate your sharing and great effort. We need more sharing like what you did. By the way, anyone know where to buy the swivel arm that support the bulky cutter. Mine broken and don't know where to buy. Thank you
@perssonsgarage
2 жыл бұрын
Thanks! Regarding spare parts, try German site: www.dewilgo.de/ or UK site: www.solenttools.co.uk/parts-by-brand/lidl.html Hope you solve it!
@breakbollocks9164
3 жыл бұрын
Quite annoying music makes it hard to watch.
@jodde73
2 жыл бұрын
Nice! Is the saw loud?
@perssonsgarage
2 жыл бұрын
Everything is relative, but yes it is quite loud.
@fredericch54
2 жыл бұрын
Yes it's very noisy, because the universal motor
@kostasjarvis4988
2 жыл бұрын
That looks like the original version, not the B2 as the video's title says. The B2 has a hole in each corner of the base for retaining bolts and, more importantly, a different retaining plate which is considerably thinner and "finned". The new plate is not robust enough to cut in the way shown and wouldn't hold the saw up even if it were cut like that.
@perssonsgarage
2 жыл бұрын
Hi, if you watch my unboxing video you will see that it says B2 on the box and it did so in the manual as well. Possibly it can differ in different markets. I have specified the model according to the machine I bought. See unboxing video: kzitem.info/news/bejne/1Jyc2Z6pgqGFiYo
Пікірлер: 31