The moral of the story is use anti-seize on everything. Never leave a thread without anti-seize.
@AppliedOCD
3 ай бұрын
AMEN!
@Farlig69
3 ай бұрын
Absolutely - my golden rule no.1 for everything I take apart is it always goes back together with antiseize!!
@theresters1
3 ай бұрын
NEVERSEEZE!!!
@Comm0ut
3 ай бұрын
Also remember LOCTITE ACTS AS ANTI-SEIZE by excluding moisture intrusion. It resists vibration too which is why I use red gel on my air compressor NPT threaded connections. Rust strips and breaks hardware.
@capt.stubby245
3 ай бұрын
Alright, help settle a friendly dispute we've had ongoing for over 20 years around here. Copper based or aluminum based anti-seize? I personally don't want aluminum in touch steel. Thoughts?
@andrewhostetler9035
3 ай бұрын
Thank you for sharing your work with all of us. As if your work is not hard enough you do it all with one hand so you can video it. You are the man.
@richardlincoln8438
3 ай бұрын
I learn something during almost every video Zach. Thanks for the time and efforts. Best Wishes to You and Your Family.
@TheZachLife
3 ай бұрын
Thanks.
@jaytee8258
3 ай бұрын
You avoided picking up an Olympic weight. 🏋 Works for me😸
@stovebolt448
3 ай бұрын
Thanks for the video Zach.
@jonnojamwood
3 ай бұрын
Keep it coming no matter if you think it's good content or not. Feed the monster
@advancednutritioninc908
3 ай бұрын
Great Video! Perseverance! Creative Problem Solving!! Well Done!!
@TheZachLife
3 ай бұрын
Thanks.
@apollorobb
3 ай бұрын
Cool seeing some old EMSCo epquipment . I use to rebuild their Mud pumps and Roll tables,Swivels .
@darenlowery1235
3 ай бұрын
Ole Emsco, unit!❤
@wycks-5095
3 ай бұрын
Milwaukee tools are by far the best 😂 keep up the hard work
@AppliedOCD
3 ай бұрын
Cool video, Zach! I'm still waiting for the full-length video on how to set the counterweights. Take those bolts out, clean them good with a wire brush, tap and die, then spooey them up with some anti-seize!
@ironcladranchandforge7292
3 ай бұрын
I've said this before on a previous video, but considering all the work you do traveling around servicing these pumps, you need to build yourself a truck with a service bed!! It could carry all the tools you need out in the field along with a torch set, air compressor, generator, and even a small swivel boom that could lift that weight and put it back together. You could even mount a good vice on the back.
@TheZachLife
3 ай бұрын
I'm going to explain this in a video.
@ironcladranchandforge7292
3 ай бұрын
@@TheZachLife -- Cool, looking forward to the video!!
@bro.weaver1282
3 ай бұрын
Yeah those bolts were probably damaged by the slapping of the weights.
@ReadTheShrill
3 ай бұрын
Usually when I'm forced to take a break from getting a fastener undone, I take a few seconds to soak it in penetrant (I like PB Blaster). Penetrant's best ally is time.
@captainjohnh9405
3 ай бұрын
One thing I find that helps with seized up nuts is to quench the threads with penetrating oil after heating the nut. It seems to draw some oil into the threads. Apply, lather, rinse, repeat. Never needed more that three cycles to get the job done..... but my nuts are much smaller than yours.
@demartin5366
3 ай бұрын
Hi Zach, i like how your "perpetual disasters" always turn out well. You make it all look so effortless and easy. I enjoy the closeup "being there" feel as you work on the pumping units. Nice to see an old EMSCO working in the fields. It is always a pleasure to see your work projects. You do an excellent job presenting them. Thanks always for sharing.
@TheZachLife
3 ай бұрын
Thanks.
@om617yota7
3 ай бұрын
Don't worry, that can will start leaking again as soon as you toss it in the toolbox...........
@TheZachLife
3 ай бұрын
Hahaha yep.
@Papapickles69
3 ай бұрын
I work in industrial maintenance at a forging plant. Crazy how close those pump jacks operate like trim presses!
@rldoyle5705
3 ай бұрын
Gloom despair and agony on me if it wern't for bad luck I'd have no luck at all.
@kh40yr
3 ай бұрын
Dunk those bolts in Never Sleaze. A buddy picked up one of the "yellow brand" 750ftlb electric impactors. 14 million gigawatt battery, blah, blah. A double fisted Hand held that you can gun Commercial truck lugs off with. Had to remove some upright bunks. 1.50" bolts and nuts. It was popping the seized bolts right in two. Kablooey!, Broke another!. Damn!. The 1 inch spline drive Ingersoll Rand is feeling left out. Thanks Zach!.
@truracer20
2 ай бұрын
I use anti-seize on nearly everything. It is great as a high pressure thread lubricant, I use the standard silver on puller threads. And it stays in the threads which reduces break-away torque compared to dry, greased, or oiled threads.
@johndowe7003
3 ай бұрын
The voice overs really help 👌👌 better than the normal rambling lol. Keep up the good work 👍 Surprised you didn't put a old rachet and hammered on it. That usually works if the rachet doesn't crap out. Breaker bars work good too. Pretty sure you could fabricate a hammer wrench that has a square so you could use it on any socket
@fredflintstone8048
3 ай бұрын
The proper oil for lubing things is the lube that's coming out of a can with a hole in it and you're rushing to lube everything in sight with it before the propellant runs out.
@TheZachLife
3 ай бұрын
Hahaha
@ypaulbrown
3 ай бұрын
hello Zack, hope all is good in Texas, cheers from Florida, Paul
@raykaufman7156
3 ай бұрын
The trailers I repair use stainless steel bolts and nuts in the rear structure. I feel your pain. Sometimes they just WILL NOT come apart. Even with a 2500lb/ft air impact.
@wilco3588
3 ай бұрын
The other thing I think happens to Old buildings is actually the ground Rises every year. Plant life dies breaks down leaves another layer that's like if Grandpa lost some quarters out in the yard 50 years ago if you want to find them now you'd have to dig them up I don't think they really sank they just got covered over.
@TheZachLife
3 ай бұрын
I believe that.
@alro2434
3 ай бұрын
We, the Earth, gets a really thin layer of Cosmic dust every year
@peterhodgkins6985
2 ай бұрын
I gotta say that Milwaukee is one rough ole boy!!!
@blanejr1
3 ай бұрын
2 videos released at the same time????? Love it!
@diesellivesmatter
3 ай бұрын
I've seen two different weights come off. One unit it broke the weight and broke the base of the unit, the other one it broke the arm of the unit.
@waynep343
3 ай бұрын
Do you have a spare nut. Lathe one side totally flat. So it may catch 1.5 threads. Set it up on your mill and drill some 1/8 or 3/16 thru the nut just outside of the threads. Now you have a drill guide to drill thru seized nuts without damaging the bolt threads so you can split the nut easily.
@dcrog69
3 ай бұрын
Cordless tools have sure made life a lot easier
@TheZachLife
3 ай бұрын
100%
@bigdaddyww1
3 ай бұрын
Emscos and nationals like that have the weirdest counter balance compared to your average weight
@hike2
3 ай бұрын
You impacted the crap out of it! I’ve never been more proud of you! 👍🏻
@TheZachLife
3 ай бұрын
Lol
@kc033056
3 ай бұрын
Happy Saturday Zach, are you at all threaded by the wild fires?
@TheZachLife
3 ай бұрын
We are good. Thanks.
@mattthescrapwhisperer
3 ай бұрын
Time to mount a compressor on the truck and get a big honkin pneumatic impact gun!
@jakezgab8576
3 ай бұрын
Max counter balance. Just like balancing a crankshaft.
@googacct
3 ай бұрын
I just finished binge watching your oil field playlist. Great information and well produced. I know a lot more about oil production than I did before. You mentioned setting up your own SCADA to monitor your wells. I am curious if you have tried to setup anything to record the current usage. It seems like that could contain a lot of useful information about the condition of the pump and the well and maybe catch problems earlier. I am also curious if you have looked into using VFD's for your pump motors.
@scrotiemcboogerballs1981
3 ай бұрын
Great video thanks for sharing
@garrison3675
3 ай бұрын
Persistence applied in a copious dose ... Congratulations ! ...
@blanejr1
3 ай бұрын
3:09 I've had that happen a couple times! 🤣🤣
@texasfairbanksman272
3 ай бұрын
There’s nothing like a good hammer wrench to get a nuts attention!!
@TheZachLife
3 ай бұрын
I need to find a full set.
@kansasadventure1831
3 ай бұрын
Youre one of the few people ive heard mention duty cycle.
@Palmit_
3 ай бұрын
they way to do itis COOL the feck out of the whole thing. ice packs, fans, water... THEN use hot gun on the nut when its ald chilled. the heat gun will only heat the nut for expansion and will shift when impact wrenched. For bonus speed, do it in middle of night, when the whole desert is cold as feck.
@OtherWorldExplorers
3 ай бұрын
Having watched enough internet lore. The answer is ramen noodles and super glue. Oh and I forgot the baking soda to make the super glue cure faster but you get the point
@TheZachLife
3 ай бұрын
Hahaha
@goldcountryruss7035
3 ай бұрын
Texas size cheater time. Start with a 10-footer. I use a 6-footer on Honda crank damper bolts but then I'm not a Texan.
@markdavidson9720
3 ай бұрын
Go big or go home !
@EFCasual
3 ай бұрын
The amount of rust blowing out of that nut was amazing.
@imchris5000
3 ай бұрын
you need to make a 3/4 adapter to a slug wrench hit it with the 12 pounder
@Deepakshrikhandesir
3 ай бұрын
Zack ❤🇮🇳 & All we ❤ Zach Bro,🇮🇳 ❤ USA __🙂 we all students learning from our Teacher Zach Sir.. all the best for Final sessional Test Exam
@TheZachLife
3 ай бұрын
Hahaha thanks for watching.
@daleburrell6273
3 ай бұрын
8:35..."PERSISTENCE PAYS OFF!!!"
@northface484
3 ай бұрын
This is really a t-shirt printing press folks...!!!
@jims6323
3 ай бұрын
I'm sure the smashed threads didn't help. Thats the best advertizement for a tool I've ever seen!
@jefferyyoung6836
3 ай бұрын
I like how you use an amp meter to measure the load on the motor, kind of smart for a good old boy
@user-ks4eb5ii5i
3 ай бұрын
You have to in order to determin where to set the counter weights. You have a rod side and weight side. They counter eachother on the strokes. You want them within 2 amps apart or lower in order to not burn up the electric motor. The closer they are the longer it will run.
@texasblaze1016
3 ай бұрын
You could use a big breaker bar
@parker1ray
3 ай бұрын
I have had this happen with paint cans! The manufacturers are making them as thin a tin foil these days!
@wilco3588
3 ай бұрын
I'm Giving Up on propane it's just not hot enough I use the yellow tank stuff map gas although I think it's fake fake map gas now I think it's propane with some oxygenation in it.
@Grant-vk6zo
3 ай бұрын
10:02 After all that he throws it down. LOL Tools gotta earn their keep around there.
@Vile-Flesh
3 ай бұрын
That had me laughing when he did that.
@TheZachLife
3 ай бұрын
Hahaha
@BackwoodTexan
3 ай бұрын
That Milwaukee impact is a bad dude! Cheater pipe left the chat
@leeleelee1236
Ай бұрын
M18 tools are great 👍
@lukearcher886
3 ай бұрын
Don't fix it, just bojicky it up, it'll probly work..... might not be too bad! Good luck buddy
@Comm0ut
3 ай бұрын
Do thyself a favor and bring a small oxy-acetylene rig and leave propane-air baby torches for soldering. You'll save serious time and money. Those nuts would have been red hot in minutes then your impact would have snatched them. I wash off my nuts (well, the machine's nuts) off completely with cutting torch if they're really bad. With a little practice you can miss the bolt threads and it's fun to show people who didn't know what a torch with a small cutting tip can really do. About 12 psi acetylene and 30+ on the oxygen does the deed but different welders like different settings. Heating the nut then applying penetrant as it cools is also an option. Every mechanic should practice nut removal before they need to do it on a workpiece. Used cylinders are cheap (I collect them at auctions and have more industrial gases than many welding shops) and easy to score in quantity so ya never run out on a weekend. Used quality US-made torches are cheap online and rarely need attention. Any common US regulator is easy to rebuild yourself with a kit but they're cheap to send out to and then someone else cleans them up.
@TheZachLife
3 ай бұрын
Ive got a couple of sets but I"ve been thinking about picking up a really small set of bottle I could carry around.
@alro2434
3 ай бұрын
Even the yellow bottle of MAPP gas, like the propane blue bottle puts out more heat in less time.
@markdavidson9720
3 ай бұрын
Two months down … time is money !
@ccronn
3 ай бұрын
As a former roustabout and well cementer, do you think I could come out to your place for about a week for an internship? Come on buddy, two willing capable and able hands for free!
@rocksfromHiscornerstone
3 ай бұрын
So we always after heating up the nut quench it with water. Try it next time you might be shocked 😳.
@wilco3588
3 ай бұрын
For the money I find Deep Creek from seafoam some of the best penetrating spray out there
@ruben_balea
3 ай бұрын
If you used a breaker bar and a long cheat bar instead of the impact, would you rotate the entire thing instead of loosening the bolts?
@TheZachLife
3 ай бұрын
Possible. That 3/4 impact is amazingly strong.
@ionstorm66
3 ай бұрын
I find the duty cycle on high torques is about four 9 ah batteries straight in sunny 100+° weather before they smoke. So I think you were under the limit. I will say the straight propane isn't good for much, but mapp with a turbo tip, and the oxy propane mini torch set are killer.
@TheZachLife
3 ай бұрын
Hahaha I may look into a oxy propane.
@ionstorm66
3 ай бұрын
@@TheZachLife have one of the mini 5lb grill tanks and a 20cuft tank. Don't have to worry about tipping the acetylene, and it will still get bolts cherry red.
@redneckracing674.5
3 ай бұрын
looks like he needs a dewalt impact then at least the rusted bolt would be the weak point.
@ironcladranchandforge7292
3 ай бұрын
As much as I like Dewalt, and have a lot of Dewalt stuff, Milwaukee is better. Torque tests have proven this with the impact comparisons. I own a couple of Milwaukee cordless as well an they beat the crap out of my Dewalts. Problem is, Milwaukee is much more expensive.
@redneckracing674.5
3 ай бұрын
ever watch torque test channel for the last year?@@ironcladranchandforge7292
@1vester1
3 ай бұрын
put some air on your truck old air impact :)
@MP57719
3 ай бұрын
How far are you away from a hardware store if you needed more antiseize spray?
@michaelsedway9703
3 ай бұрын
50/50 atf and acetone in a spray bottle
@diesellivesmatter
3 ай бұрын
How would a hammer wrench and a 20# sledge do?
@TheZachLife
3 ай бұрын
That's what I needed.
@joedoakes8307
3 ай бұрын
Why destroy the Impact wrench ? Did you lose your cheater pipe ?
@ozzyfranf
3 ай бұрын
Two videos in one day?
@user-go4hy1kh7z
3 ай бұрын
We used hammer wrench’s!
@waynep343
3 ай бұрын
I was thinking of your shop flooding floor don't raise the floor lower the ground around your shop
@manifold1476
3 ай бұрын
Jeepers and Wizz! Another pile of *s(tuff)* to make a silk purse out of. lol
@larrysimpson6087
3 ай бұрын
Hi, Are you located near the fires in the panhandle?
@Farlig69
3 ай бұрын
How's yer API RP500 doing there with your naked torch?? 🤣
@TheZachLife
3 ай бұрын
Hahaha
@catman5546
3 ай бұрын
What happened to the video??
@joe7497
3 ай бұрын
This is just an ad for milwaukee impacts
@michaelchamberlain4618
3 ай бұрын
They're going to burn the motor out up and down like that
@TheZachLife
3 ай бұрын
It survived.
@tugboat2739
3 ай бұрын
Howdy Zach
@TheZachLife
3 ай бұрын
Howdy
@robertjarvis2744
3 ай бұрын
Love ya buddy but you need a bigger impact lol
@TheZachLife
3 ай бұрын
May have to but the 1 inch.
@hmrody
3 ай бұрын
LOL! I think Milwaukee needs to give you tools to test... They do have a M18 Fuel 1" 2000 ft/lb beast, but it is really expensive. When I worked offshore, we had a ginormous air powered impact that took two men to operate. It had a steel bar that rested against the pipe to prevent it from turning due to the torque (you would not be able to hold it otherwise). Best!
@TheZachLife
3 ай бұрын
I may pick one up.
@joedoakes8307
3 ай бұрын
Andrew camarata enjoys destroying his tools and vehicles as well ! Lotsa dollars and NO Sense !!!
@shawndinterman2219
3 ай бұрын
No we didn't witness the can seal itself becuase the camera guy sucks lol
@TheZachLife
3 ай бұрын
Hahaha
@wdcjunk
3 ай бұрын
Seems like you needed less impact and more hillbilly breaker bar.
@TheZachLife
3 ай бұрын
Hahaha
@Chris-hd3yc
3 ай бұрын
2 things, guys that trust threads to self start sketch me out bigtime, those are mighty course threads so idk bjt still and 2, aint that a bitch when you drop your can and put a hole in it?
Пікірлер: 133