Try a speedometer cable, they work fantastic. Another trick is, fold a zip tie in 1/2 and put the loop into the hole until it fits tight against the inner wall of the tubing. Fish your wire past the zip tie, pull the folded zip tie back out and it should pull your wire out in the loop. I own Audio 2000, that's an old car audio trick.
@GLifeUTV
3 жыл бұрын
Dam good advice.. 👍👍 pinned comment so more guys can see it👌
@jaygarcia5121
Жыл бұрын
@@GLifeUTV yo bro does the passenger side also have the 🕳️ in the cage?
@scottschilling375
4 жыл бұрын
Thanks for the video! Incredibly helpful to run the wiring!
@GLifeUTV
4 жыл бұрын
Sweet, glad it helped
@underourrock
3 жыл бұрын
For tight runs, I've cut one of the wires 6" short and the trimmer (or other pull string) replaces that wire. This only works if you have the wire you can spare... After the run I clip the wires so they are the same length wasting about 6" of wire. Also, I pull the electrical tape tight / stretching it so it is thinner. This can make a difference in how easy a line pulls through a narrow spot. Your method here is great, I just hope this tip can help make it that little bit easier next time. I'm definitely using the info you shared to get my light bar put up there when the time comes. I'm going to see if I can get my whips wired that way.
@NatalieTaekwondo
3 жыл бұрын
Trimmer line. Who knew? Always nice to see new ideas. 👍
@GLifeUTV
3 жыл бұрын
😅👍 landscaping background.haha
@NatalieTaekwondo
3 жыл бұрын
@@GLifeUTV Same here. Caught my eye. 😁 kzitem.info/news/bejne/1KShv6adanaCoJw
@timdavis4648
Жыл бұрын
Have to try weed wire. I’ve always used bailing wire, works good but can bunch up.
@GLifeUTV
Жыл бұрын
👍
@romenaguinaga1973
9 ай бұрын
So basically I run everything to the bus bar. Put my ground to the top one the black one and then all my powers to the bottom one red accessory one correct?
@StorminTheOutdoors
3 жыл бұрын
I bought a Klein wire snake at Home Depot for literally 12 bucks. Works wonders.
@GLifeUTV
3 жыл бұрын
Ill look in to that. Good to hear
@bpmaclean
Жыл бұрын
It worked, thank you!
@GLifeUTV
Жыл бұрын
Glad it helped
@antonioaguilar1968
Жыл бұрын
Hey brother any idea on how to run the wire thru the tube cage for my pod light and rock lights/ dome lights
@tommyhairyeah7726
3 жыл бұрын
Put a lightweight string on either end and suck it through the other side with a shop vac.
@marioflores4890
3 жыл бұрын
What would be the cause of the light bar making noise through the speakers ? I connected the negative and positive thru the bus barn
@GLifeUTV
3 жыл бұрын
Light bar power wires running to close to head unit.. or to close to speaker wire.
@marioflores4890
3 жыл бұрын
@@GLifeUTV what would you recommend me doing there ? Do I just separate so the wires don’t touch or ?
@GLifeUTV
3 жыл бұрын
@@marioflores4890 for one yea.. keep them away from ach other so there is no emi
@itzuniquegaming5285
3 жыл бұрын
i love how you explained how the power works on the can am many people leave that out in there videos
@GLifeUTV
2 жыл бұрын
THANKS
@TKLETSGOHIKING
3 жыл бұрын
Hey brother!! How are you attaching rock lights to the tube chassis. I'm using rock lights as "dome lights"
@GLifeUTV
3 жыл бұрын
Most of the rock lights ive purchased come with a rubber piece that had the radius of the tube
@mattdude4729
3 жыл бұрын
So you got 2 reds on the bus bar, does it matter which one you land your light terminal on?
@GLifeUTV
3 жыл бұрын
Yes.. the main power goes on the bigger red cable.. that is straight to the battery. The small red is the accessory on
@mattdude4729
3 жыл бұрын
FrankGLife Saaaas. Just got a 2021, early Xmas gift for the family. Putting some LP4s and the shock mount light on. Hopefully we’ll see you out there soon. Thanks for the vids
@GLifeUTV
3 жыл бұрын
@@mattdude4729 congrats bro.. thats badass and great to hear🤟👌🤟👌
@2Mjr002
3 жыл бұрын
Do u have to disconnect the battery before connecting on that electrical bar
@GLifeUTV
3 жыл бұрын
you dont have to. just make sure you dont touch the big red wire and black wire together.. just remove one at a time.
@2Mjr002
3 жыл бұрын
@@GLifeUTV I tried it out today but for some reason the switch stays on even when the can am is off is that normal or did I do something wrong ?
@GLifeUTV
3 жыл бұрын
@@2Mjr002 you could follow this video on how to wire a switch ... kzitem.info/news/bejne/xoOuwIh9q5Wghmk
@marii.o6967
3 жыл бұрын
Where can I find this light bar
@GLifeUTV
3 жыл бұрын
This is a generic cheaper light bar that can be found on amazon
@serkan5001
3 ай бұрын
When you were pushing the wire up through the hole. You got to give it that Hawk Tuah, spit on that thang! Sorry I had to lmao Great video tho, learned a lot.
@oscarcasarrubias9640
3 жыл бұрын
Thanks for show us, good job 👏🏼👏🏼👏🏼
@ashleyroy3206
2 жыл бұрын
Does the 2022 maverick trail dps have the 3 posts to wire lightbars etc instead of using the battery. Thanks
@GLifeUTV
2 жыл бұрын
Sorry not familiar with the trail, but i would assume so.. try one of the facebook groups for that machine
@abrahammercado5257
4 жыл бұрын
Thanks homie. The light worked perfectly!!
@GLifeUTV
4 жыл бұрын
🤟👌
@JeepTJay6
2 жыл бұрын
This is a trip! I don’t even own a UTV and I’ve now come across your channel twice looking for how-tos on projects for my Jeep. Last time it was the Switch-Pros RCR Force 12 and now this. Must be a sign. I guess I’ll go with it and subscribe 😂. Great content. 👍
@GLifeUTV
2 жыл бұрын
Haha.. thanks bro🤙😅
@2Mjr002
3 жыл бұрын
Is the ignition on a positive or a negative ?
@lolafalana3636
2 жыл бұрын
Can I be your buddy and drop off my KRX for all my led light needs?
@GLifeUTV
2 жыл бұрын
😅
@hunter19871956
3 жыл бұрын
Dang! I’ve used everything feeding it through the cage in my Can Am Defender with a lot of frustration! Never thought about a freaking weed eater line....haha...thanks!
@GLifeUTV
3 жыл бұрын
🍻👍👍
@underourrock
3 жыл бұрын
It's close to 100 degrees outside. Save me a trip to my garage? Is there a similar hole / method for running whip lights through the cage for a clean install?
@GLifeUTV
3 жыл бұрын
kzitem.info/news/bejne/tG6n4HxofoyFoX4 this might help
@thosecrazyarkwrights
Жыл бұрын
Awesome tips!
@MrRascal619
Жыл бұрын
Frank wsup ! Put a baja light on , chase light , fosgate radio , sb filter , lighted whips and now my fuse keeps popping that my radio , sb filter and well all my accessories are on what should i do ☹️
@GLifeUTV
Жыл бұрын
Sounds like you're overloading the 30 amp fuse for the accessory circuit.. The accessory circus should be used to turn on the components ..but the component Should be drawing power from the main red battery cable.. ur setup is not properly wired
@MrRascal619
Жыл бұрын
@@GLifeUTV ok cool started happening when I added chase bar and that only has the red and black wire and connected it to the key on bar
@jerryedwards9835
2 жыл бұрын
Your video saved me from buying a fish tape that I would rarely ever use
@GLifeUTV
2 жыл бұрын
Awesome to hear 👌👌
@judithpearson9845
Жыл бұрын
Where do you purchase your string in order to run your wire through the cage
@GLifeUTV
Жыл бұрын
Its just string trimmer string from home depot. Brand doesn't really matter
@moez1774
3 жыл бұрын
Thank you for the video. I did not know that the Can-Am came with the bus bar
@GLifeUTV
3 жыл бұрын
👍👍
@moto-
4 жыл бұрын
My brother needs one of Thoes light bars the Curved ones awesome video brother keep it up
@GLifeUTV
4 жыл бұрын
Thanks my dude.. u rock
@moto-
4 жыл бұрын
FrankGLife np bro
@ernestoruiz6615
4 жыл бұрын
Were the rc footage
@GLifeUTV
4 жыл бұрын
Haha fuckin guy
@giomtzz956
4 жыл бұрын
I got the string thru the cage and couldn't fit the wires thru the cage
@GLifeUTV
4 жыл бұрын
Where they thick wires?. U could drill the hole just slightly
@giomtzz956
4 жыл бұрын
@@GLifeUTV it gets thru just gets stuck at the first curve
@GLifeUTV
4 жыл бұрын
@@giomtzz956 are you pushing the wire thru... Trick is to push it thru and not pull it
@giomtzz956
4 жыл бұрын
@@GLifeUTV I guess I need a second I'm pushing it thru but it's just won't fit i mean I even trying the weed string now also
@GLifeUTV
4 жыл бұрын
🤔should go thru man... Enlarge the whole so the wire doest get stuck.. use the sweed wacker string.. ive done it many times.. hope u get it bro🙏
@n2rescue359
4 жыл бұрын
How are you liking your utv speed cage ?
@GLifeUTV
4 жыл бұрын
So far so good. The cage looks great.. feels strong.. keeping all 4 wheels on the ground. So havnt tested😆. They do take long to make
@n2rescue359
4 жыл бұрын
FrankGLife thanks for getting back going to get by there Monday who did you talk to If I drop your name will the price go up ha, but I have a rzr turbo so hope the build quality is the same Cya thanks again.
@GLifeUTV
4 жыл бұрын
@@n2rescue359 drop my name and prices doubles.... I dont talk to them much.. i think guy was steve. They took two months exactly to make cage.. same thing for another follower of mine on Instagram. Twp months exactly aswell
@n2rescue359
4 жыл бұрын
FrankGLife thanks for the info we will see as there price seems fair your video from the shop looked like they were swamped with work
@GLifeUTV
4 жыл бұрын
They usually are . Probably why they take so dang long
Пікірлер: 84