The first 1,000 people to use the link will get a 1 month free trial of Skillshare: skl.sh/1sttrackdents06221 Hi everyone, I hope you enjoy my latest challenge, if you have any feedback for me, please feel free to leave it down in the comments and I will respond.
@josericardo476
2 жыл бұрын
Buen trabajo maestro de varillaje golpes sin daño a pintura yo soy laminero e pintor automotriz y me gustaría aprender tu oficio para arreglar carros de marcas no comerciales una pregunta cómo cuánto cuesta un curso de varillaje soy de México Aguascalientes gracias maestro buen trabajo
@hingbagrasonhingbagrason5638
Жыл бұрын
Waiting for your respond towards my requests.! 😁
@1st_track_dents
Жыл бұрын
@@hingbagrasonhingbagrason5638 Just responded to your previous request 👍
@vicentemaldonado865
Жыл бұрын
Make presential courses ?
@1st_track_dents
Жыл бұрын
@@vicentemaldonado865 The market is flooded with online PDR courses, so there are tons available if you want to learn 👍👍
@BriFree100
2 жыл бұрын
I’ve seen a few magicians before but they usually have a magic wand and a deck of cards!! 😀 Amazing job!! 👌👌
@1st_track_dents
2 жыл бұрын
Ha ha, yes I only have a set of rods and a hammer! but I still like to make dents disappear though! 👍
@batmansdad3195
2 жыл бұрын
The magicians I see usually empty your wallet in a matter of hours 🤣
@1st_track_dents
2 жыл бұрын
@@batmansdad3195 Ha ha, not this one 😂
@Jay-B1750
2 жыл бұрын
nice to see you treat every car with your usual high attention to detail, most people would turn their nose up at working on a little run around, it looked mint!!
@1st_track_dents
2 жыл бұрын
Thanks, yes it was a clean little car really and much nicer looking without those ugly dents! Thanks for your comment 👍
@marknoir
7 ай бұрын
You are a genius! I wish we had someone of your caliber here in Brooklyn, NY, USA.
@MrSiViF
2 жыл бұрын
Jake you done it again!! Amazing work and I much appreciate you putting this together for us. As a bonus for us (because you don't treat us enough ;) ) I think we would love to see customer reactions if they are comfortable being filmed that is. Again, amazing. Thank you. Nearly done my 1st week at keco training and loving it.
@1st_track_dents
2 жыл бұрын
Thanks, I’ve never asked a customer yet to be filmed. I’ll have to see if I can make that happen at some point. Great to hear your training is going well and that you are enjoying it. Looks like we might be seeing some of your videos soon! Wishing you all the best with the rest of your training 👍
@dingking7577
2 жыл бұрын
Dude that passenger side was Brice level stuff! Amazing job!!!
@1st_track_dents
2 жыл бұрын
Hey Tommy, I'll take that as a huge compliment as Brice is a superior PDR tech! Thanks 👍
@andyskinner7163
Жыл бұрын
Once again Jake,just mindblowing that,wizard🎉
@1st_track_dents
Жыл бұрын
Thanks Andy! 👍👍👍
@31acruz
2 жыл бұрын
You sir are an artist!
@1st_track_dents
2 жыл бұрын
Thanks 😉
@2andmorewheels322
2 жыл бұрын
Jake! The off side wing was beyond repair even for the filler, spray guys standard!!! Well done. Thank you for this video.
@1st_track_dents
2 жыл бұрын
Thanks, yes it's good to challenge yourself every now and then, I was really pleased how this cams out especially as I was getting battered by very windy conditions. Thanks for your appreciation 👍
@tailwhipolaf
Жыл бұрын
can you do a tutorial for how hot and for how long to warm up the paint? and cool down times and when to reheat after cool down? that would be great for the channel
@uaydes
2 жыл бұрын
Bu sporu güzel yapıyorsun. Bravo.
@1st_track_dents
2 жыл бұрын
Thank you 👍
@f1kwa399
2 жыл бұрын
Incredible work, the drivers side dents looked really nasty and I thought beyond saving, you are very very good, each time I see a very small ding in my rear door (thanks to someone in a car park no doubt) I’m reminded of you and how I ought to plan a trip your way! Fantastic video, thanks.
@1st_track_dents
2 жыл бұрын
Thanks, yes when the customer said that he was just happy for an improvement it took the pressure off and made me want to get it as good as I could. Thanks for your comment! 👍👍👍
@VIJAYSINGH-wp2sj
11 ай бұрын
Excellent Skill nice Job 👍 Love from India 🇮🇳🎯
@Bewareofthedog69
2 жыл бұрын
Jake, that was a fantastic result especially with that horrible creased O/S wing. Forget 50% that was 150% craftsmanship my friend!👍👍
@1st_track_dents
2 жыл бұрын
Thanks Mark, yes certainly took a fair bit of work to get it looking like that. These cars always have dents in these front wings like this so I have definitely had a fair bit of practice doing them over the years. 💪👍
@darcymark7526
Жыл бұрын
I really appreciate your effort and time to make the analysis part👍
@1st_track_dents
Жыл бұрын
Thanks, yes that part always takes the longest to edit 👍
@schpiedie
10 ай бұрын
Fantastic job! You are a real artist!
@KarelBeelaertsvanBlokland
2 жыл бұрын
Amazing result and craftmenship. Well done!
@1st_track_dents
2 жыл бұрын
Thank you 👍
@sanjeevrabindranath3271
2 жыл бұрын
Awesome as usual Jake, truly great craftsmanship
@1st_track_dents
2 жыл бұрын
Thanks Sanjeev 👍
@LearnPDROnline
2 жыл бұрын
Incredible results Jake, especially that drivers side wing, that was nasty. Good old English weather testing you too!
@1st_track_dents
2 жыл бұрын
Thanks Tom, yes I know you can relate very well to working in these conditions! Sometimes I don't know what's more challenging...doing the dent or battling with the weather! 😂 Take Care 👍
@declanmceleney7429
2 жыл бұрын
Fair play to you for taking that on in a car park. Not easy working outside in the UK for hours
@1st_track_dents
2 жыл бұрын
Thanks Declan, this is the type of environment all of my jobs are done in, I can't remember the last time I did a job under some cover! 👍
@declanmceleney7429
2 жыл бұрын
@@1st_track_dents I'm a PDR man in Ireland, I couldn't work outside much due to the shit weather we have.
@1st_track_dents
2 жыл бұрын
@@declanmceleney7429 I would love to have a workshop but the costs here for rent and business rates would leave me with nothing left at the end of the month. It would be good if I could find someone locally with some workshop space that I could rent as and when I needed it, but that's not easy to find. All the best Declan, have a great weekend! 👍
@geoffreycartmill7717
Жыл бұрын
Excellent video! Master at work!
@AlexRodriguez-hi6oe
3 ай бұрын
perfect technique excellent work congratulations Jake
@whaymwarlock871
2 жыл бұрын
Can't imagine a better pro , you are just a master i would love to have.
@1st_track_dents
2 жыл бұрын
Thank you so much!
@matty7768
2 жыл бұрын
Excellent job as always 👏🏻 I've done countless dents on 206 front wings ! They just attracted dents!
@1st_track_dents
2 жыл бұрын
Thanks Matty, yes, I also did quite a few of these wings many years ago when this model of car was not so old, they all had that same rounded dent which I did on the left side! As you well know, they can come out quite well if you have enough patience!
@matty7768
2 жыл бұрын
@@1st_track_dents yes they do move well, and always the same size round dent 😂 I wouldn't have even attempted the drivers side wing, well done 👏🏻
@selmirjasarevic9305
2 жыл бұрын
Perfect as always.
@1st_track_dents
2 жыл бұрын
Thank you 👍
@gordonburns8731
2 жыл бұрын
Exquisite repair!
@1st_track_dents
2 жыл бұрын
Thanks Gordon 👍
@sidaliali3032
Жыл бұрын
Your work is wonderful, you are a magician in it. I wish you success and health and wellness
@1st_track_dents
Жыл бұрын
Thank you so much for your kind words, I wish you very much the same! 😍
@WipeOutPDR
Жыл бұрын
Wow amazing repair! Great work 👍
@1st_track_dents
Жыл бұрын
Thanks! Not sure what was more challenging that day, the dent or the weather that completely blew my umbrella inside out and destroyed it! The joys of working mobile in the UK Weather 😂
@peterjdo
2 жыл бұрын
Genius work as always 😎👍
@1st_track_dents
2 жыл бұрын
Thanks Peter, appreciate your comment 👍
@martinlouden9005
2 жыл бұрын
Nothing short of genius!
@1st_track_dents
2 жыл бұрын
Thank you Martin 👍👍👍
@Bassman1999
Жыл бұрын
Great work/result!!
@1st_track_dents
Жыл бұрын
Thanks Keith 👍
@Shift_Engineer
2 жыл бұрын
Excellent Work...
@1st_track_dents
2 жыл бұрын
Thank you! 👍
@jamesyday72
2 жыл бұрын
Fantastic jake 👏
@1st_track_dents
2 жыл бұрын
Glad you enjoyed it!
@thetrailwaychildren
2 жыл бұрын
Could you do a video explaining when you would have to turn down jobs and why, for example a panel full of body filler etc?
@1st_track_dents
2 жыл бұрын
I'll certainly consider it, thank you!
@jasonhickman4120
Жыл бұрын
Thanks mate only just seen this video, mums well happy and im happy to say the car is still dent free Top job kind regards jason
@johnhaw7571
Жыл бұрын
Good job!!
@user-mz1mp3kk1s
9 ай бұрын
Good job 👍
@jrcflaus
2 жыл бұрын
Another great job and video!
@1st_track_dents
2 жыл бұрын
Thank You! 👍
@sreejeshts
2 жыл бұрын
What a transformation back to its glory!
@1st_track_dents
2 жыл бұрын
Thanks 👍
@craigharper247
Ай бұрын
Absolutely exceptional!!!! I have a 1982 Ford Sierra 27k miles with a similar dent in the front left wing and reallly really want to keep the paint/panel original......youve inspired me!! Im based in Falkirk, Scotland....dont suppose your planning a trip up!? 🤣
@johnbell7552
2 жыл бұрын
Sir, a remarkable transformation of what looked like the result of pretty severe collision. If only I were a few years younger, I would’ve love d to work under your tutelage. All the very best
@1st_track_dents
2 жыл бұрын
Thanks John, yes it did look like it had been hit more than a few times! But yes it felt great to get it as good as I did as Peugeot metal can be a bit challenging. Thanks for your kind words 👍👍
@danthemetalman7736
2 жыл бұрын
Nice job
@jasonrichardson7762
Жыл бұрын
Great job I can't even see any paint bruiseing and Im amazed the paint didn't split on that profile edge. Top job 👍
@1st_track_dents
Жыл бұрын
Thanks Jason 👍
@simonsherwood7169
11 ай бұрын
Class job
@pudermcgavin4462
2 жыл бұрын
Pdr has come so far from when I went to body school almost 20yrs ago and it was just in it's infancy and all about hail chasing!
@1st_track_dents
2 жыл бұрын
Yes PDR wasn't really known about when I was at body school in the early 90's. Yes, it's amazing what can be repaired these days. There are some amazing PDR guys all around the world today that are so talented and everyone of them is pushing the limits! It's great to see 👍
@Casey.seeK.
2 жыл бұрын
That must be the most loved 206.
@1st_track_dents
2 жыл бұрын
This one certainly was in good condition 👍
@ronaldkabina9065
2 жыл бұрын
Great work Sir!👍
@1st_track_dents
2 жыл бұрын
Thanks Ronald 👍
@dentremover01
2 жыл бұрын
Amazing work Jake! I know I was meant to be saving the video til tomorrow while I was around my camp fire …. BUT! Curiosity and all that! Well done that drivers front wing was an amazing save! And you know a 50% means “Challenge” just like we spoke about the other day! Have a great weekend Jake! Martin@ Dent-Remover
@1st_track_dents
2 жыл бұрын
Thanks Martin, yes the hot and cold glue definitely took a lot of the hard work out of it, but there's nothing like being on your knees getting battered by gale force winds and icy rain pushing dents out, people with office jobs don't know what they are missing! 😂😂😂 Take it easy mate 👍
@feathersandtarmac6456
Жыл бұрын
Again great work
@stevenbell482
2 жыл бұрын
@TOPNOCH amazing work @Jake. Always a pleasure seeing you do your "Magic" ;-) Greets
@1st_track_dents
2 жыл бұрын
Thanks Steven 👍👍👍
@BryanM362
Жыл бұрын
Unbelievable!
@larsy9269
Жыл бұрын
Отличная работа! Вы большой профессионал своего дела!
@1st_track_dents
Жыл бұрын
спасибо!
@mick5114
2 жыл бұрын
That was amazing 👏, very good content and an eye opener to what can be achieved.
@1st_track_dents
2 жыл бұрын
Yes, it is amazing what can be achieved sometimes, really appreciate you watching, thanks 👍
@emilianoarancibia4464
Жыл бұрын
Este año voy a estudiar este gran oficio, soy pintor automotriz y estoy maravillado con este trabajo.. felicitaciones por tu profesionalismo.. saludos desde Chile 🇨🇱
@1st_track_dents
Жыл бұрын
Muchas gracias, te deseo lo mejor 👍👍👍
@emadallie3721
Жыл бұрын
Wow great work 👌
@SweeneyDunston
2 жыл бұрын
HEY! Welcome back! Good to see you make a return!
@SweeneyDunston
2 жыл бұрын
PS.. Not sure if you remember me but I'm still here. Also, your content inspired me to buy a small kit to fix the wings of my Impala and a door and wing on my new Crown Vic.
@1st_track_dents
2 жыл бұрын
Thanks!
@1st_track_dents
2 жыл бұрын
@@SweeneyDunston That's really great to hear, I hope it all worked out for you, I'm sure your repairs came out great 👍
@ioanniskyriakidis1495
2 жыл бұрын
Amazing piece of work! Too pity you are so far away! Hope someone will do that in Greece too.
@1st_track_dents
2 жыл бұрын
Thanks 👍
@josephknudson5097
2 жыл бұрын
Amazing work as always Jake. God bless and thank you for all you do.
@1st_track_dents
2 жыл бұрын
Thanks Joseph 👍
@erwinss9801
Жыл бұрын
Saya sangat menghargai pengetahuan bapak,semangat and terus berkarya,terima kasih
@1st_track_dents
Жыл бұрын
Terima kasih banyak 👍
@retro80s80
2 жыл бұрын
Very nice. I've pulled a few dents recently with glue and it's really annoying when you pull the clearcoat or paint off..... 😂 Lucky for me I'm able to repair it. Awesome job as always 👍🏻👍🏻
@1st_track_dents
2 жыл бұрын
Yes, the cold glue is much safer, but the hot glue can be a lot more aggressive. It did concern me on this as it was an older car, but I was confident from checking both panels closely that the paint was original. Thanks for the comment! 👍
@rodneybrand8521
2 жыл бұрын
Excellent..like it never happened..you are the best I've seen ..see you on the next one..Cheers 🍺🍺🍺🇺🇸🇺🇸🇺🇸
@1st_track_dents
2 жыл бұрын
Thanks Rodney, yes see you on the next one soon 👍
@Nemo-nm1ef
2 жыл бұрын
Nice! I miss those old 206 front wings! Money makers 🤣
@1st_track_dents
2 жыл бұрын
Thanks 👍
@772777777777777
Жыл бұрын
In future video can you show more Techniques more in detail how you create leverage in those difficult areas to reach
@1st_track_dents
Жыл бұрын
Yes this one was particularly difficult as the area was too wide and open, so you will see that I had to wedge a large piece of wood into the headlamp space to push off to get the leverage I needed 👍👍
@davecooke914
Жыл бұрын
Amazing job 👍 👍
@1st_track_dents
Жыл бұрын
Thank you 👍
@aaronaguayo4941
2 жыл бұрын
Thank you so very much
@1st_track_dents
2 жыл бұрын
Thank You 👍
@paulscott2502
2 жыл бұрын
Amazing work Jake! Wow.
@1st_track_dents
2 жыл бұрын
Thanks Paul 👍
@marksweetman8765
2 жыл бұрын
Top work as always. Thanks for sharing
@1st_track_dents
2 жыл бұрын
No problem Mark, thanks as ever for watching 👍
@avsownwings
2 жыл бұрын
Great video again! Currently I am struggling to get long, thin creases out. If you make a video about one of those that would be awesome. Or just any tips and tricks about those types of creases you may have would help a lot! You're an inspiration!
@1st_track_dents
2 жыл бұрын
Thanks, yes creases can be difficult to do, you just have to know how to attack them, if you start them wrong they can lock up and become more difficult to do. It all comes with time and experience. But I will see if I can show a crease being taken out in more detail in another video. Thanks for your comment, best of luck 👍
@rodp2310
2 жыл бұрын
Another marvel Jake. Great job. 👍
@1st_track_dents
2 жыл бұрын
As always, thanks Rod 👍
@jonb8241
2 жыл бұрын
Unbelievable 👍👍😎
@andyskinner7163
Жыл бұрын
Hi Jake,sorry been a while,happy new year mate 👍,honestly your skills just blow me away as always.yes i know that was over a good shift but even at that,mindblowing 👏👏👏
@1st_track_dents
Жыл бұрын
Thanks Andy, that was a horrible weather day too, definitely one to be done in a nice warm workshop! 👍
@andyskinner7163
Жыл бұрын
@@1st_track_dents 😀your right there 👏
@brandywell44
2 жыл бұрын
That was amazing
@1st_track_dents
2 жыл бұрын
Thank you for your comment, much appreciated! 👍
@nelsonsantos770
3 ай бұрын
Amazing!
@ruralsavior7218
Жыл бұрын
Your work is excellent. Interestingly I have two dents not as bad with good rear access but all local PDR companies have said not interested, although many didn’t even respond. All said it needs a body shop. Not expecting perfect but seems most companies just want the simple little jobs or they have brought a few tools and not confident on these type of work
@1st_track_dents
Жыл бұрын
Thanks, That's a bit naughty that some companies haven't responded, I would always respond even to say if I couldn't do it. To be honest every dent is different sometimes smaller dents than this are not possible, it just depends on the type of metal, access and how bad the dent is. If a company can't do it, they should at least explain why because their reasons could be quite valid but if they don't tell you, how are you supposed to know. The skill level is very difficult from tech to tech some like just doing easy ones and some ;like to challenge themselves. 👍
@avadhootkochikar6107
Жыл бұрын
That’s awesome!!!
@1st_track_dents
Жыл бұрын
Thanks! 👍
@rodrigorodriguez3577
2 жыл бұрын
Buenas tardes Sigo impresionado con su trabajo Lo felicito tengo mucho que aprender de usted gracias por compartir sus vídeos
@1st_track_dents
2 жыл бұрын
Muchas gracias por tu comentario. Estoy feliz de que estés aprendiendo mucho. Todo lo mejor, Jake 😉
@alaashaker3703
2 жыл бұрын
Thank you Boss
@1st_track_dents
2 жыл бұрын
Thank you 👍
@jeffreysouthflorida7008
2 жыл бұрын
Amazing, as always.
@1st_track_dents
2 жыл бұрын
Appreciate it Jeffrey, thanks! 👍
@mercedes_and_more
2 жыл бұрын
I don’t have time to watch this now so will save for tomorrow, but as ever knows it will be brilliant i even watch it 👍
@1st_track_dents
2 жыл бұрын
Thanks and enjoy! 👍
@mercedes_and_more
2 жыл бұрын
@@1st_track_dents now watched. Always the same thing, can’t you start filming difficult dents not these little bumps. Anyone would think you weren’t very good 😂😂😂😂😂😂
@1st_track_dents
2 жыл бұрын
@@mercedes_and_more 😂😂😂 Noted! will try and challenge myself a bit more on the next one😁
@mercedes_and_more
2 жыл бұрын
@@1st_track_dents Good man 👌👌😂😂
@EZurg
5 ай бұрын
That's badass
@victorbarranca2910
2 жыл бұрын
Outstanding
@1st_track_dents
2 жыл бұрын
Thank you Victor 😉
@vadvalee
2 жыл бұрын
Наконец то я увидел твоё творчество друг!!! Ты молодец продолжай в том же духе!!!!💪👍🔥🤙
@1st_track_dents
2 жыл бұрын
спасибо за просмотр моего видео 👍
@joshuapaine3782
2 жыл бұрын
Not an expensive car but phenomenal work yet again and the video tells the full story. Definitely recommend some nice fleecy hats when working in colder conditions, keep that excellent noggin warm and functioning correctly!
@1st_track_dents
2 жыл бұрын
Thanks Joshua, yes I had all the seasons in one day doing this job. The problem is if I wrap up too much I can't move my arms, but yes I need to invest in a warmer hat, thanks!
@tridaks
2 жыл бұрын
Brilliant repair as usual, good to see a 206 without it's trademark front corner dents!! :-)
@1st_track_dents
2 жыл бұрын
Yes, these cars were certainly magnets for those front corner dents, did loads of these back in the day! 🚗🔨
@erwinss9801
Жыл бұрын
Saya menyukai pekerjaan ini ingin mengetahuinya cara tekniknya.skil yang luar biasa bapak
@Hamad_Al_Omoush
Жыл бұрын
You are the best
@ObsesifAdam
2 жыл бұрын
As usual, you did an awesome work :)
@1st_track_dents
2 жыл бұрын
Appreciate it, thanks 👍
@muratbuyukayk3105
2 жыл бұрын
i learned the job :)
@1st_track_dents
2 жыл бұрын
Thanks Murat 👍
@daniloderoma2565
Жыл бұрын
Hi Great job. How you have a electric power when you work in outside(in the road /parking)???
@1st_track_dents
Жыл бұрын
On this job I did manage to run a power cable from the customers home to the car, but yes other jobs can be difficult if there is no power supply 👍
@daniloderoma2565
Жыл бұрын
@@1st_track_dents thanks 🤝
@bogdan3978
2 жыл бұрын
any tips to fix the plastic trimming thats been dinted?
@Xend7454848
Жыл бұрын
You have really sick skill Man.. such a good job. How many years od expierence you have ?
@1st_track_dents
Жыл бұрын
Thank you, I was a panel beater first and then learnt PDR around 1998, so been doing it a while 😉
@Rogues4Ever
2 жыл бұрын
Excellent work as always. do you need an apprentice? 😀
@gazfire1322
Жыл бұрын
Some proper skill there , how much. Would this kind. Of repair cost
@Hugebach
6 ай бұрын
Your a wizard my friend
@BMWhore
Жыл бұрын
From a fellow PDR-Tech , that right fender looked nasty!! Great job on saving that. Do you use any branded cold glue, or something more common? I've heard about BMW windshiled rubber sealant, but never tried it myself.
@1st_track_dents
Жыл бұрын
Hi, at the moment I’m using the Glexo cold glue and I find it sticks really well and saves a lot of time. I haven’t tried any other brands to compare it but I really like the stuff. 👍
@AdUnumomnes
2 жыл бұрын
Legendary 👌
@1st_track_dents
2 жыл бұрын
Thanks 👍
@ocelot2234
Жыл бұрын
I will have a Job for you to fix on my Nissan Almera soon
@sefa3417
Жыл бұрын
Hey Jake. Great Job! Which Hot Glue did you use?
@tigerseye73
2 жыл бұрын
Lets see; 5 and 1/4 hours at $110 per hour=$577.50. A typical junk yard will sell these front fenders for about $35 each. Some rattle can paint finishes the job for about $100. Flipping the page, your workmanship is impeccable and worth every penny you charge.
@1st_track_dents
2 жыл бұрын
Thanks 👍 although the UK PDR prices are probably the lowest in the industry, so your calculation is quite a way off and would be much higher if repaired in the USA, but yes if that was the price charged it would be worth that just because of the skill and work involved 👍
Пікірлер: 271