Thanks for the demonstration. It will help me a lot. Clearly, I don't need to tell you off about the music!
@ianmorrison6127
5 жыл бұрын
Christ! That music! I magaged half way through the video before I just couldn't take it any more.
@ptolemyauletesxii8642
Жыл бұрын
Where can I get that wicked soundtrack?
@suetheron4495
4 жыл бұрын
ps dont know why these people are whingeing about the music, minor detail, the narration is fine and subtitles informative. The Ticks and Crosses about right and wrong are great, and the detail is really informative - eg how much texture to have on the surface, how much moisture. So helpful.
@johncourtneidge
Жыл бұрын
Beautiful! Thank-you!
@oldmanfromscenetwentyfour8164
4 жыл бұрын
Excellent presentation!
@suetheron4495
4 жыл бұрын
Fantastic video thanks so much for how informative it is. I've been looking everywhere trying to find out how to do this. Only trouble I have is trying to find the right fibres here. I wonder if I can use human hair from a hair dresser? And am assuming the hair part is for the initial coat. I hope to do a course with you guys this year.
@petergambier
5 жыл бұрын
Well done for counter lathing, so few people do this and I would argue along with rubbish spacing (I use the tip of my little finger) that this is a probable cause as to why ye old plaster walls may have failed. On the fibers, I try not to use polypropylene because they are too smooth and shite for the environment because they don't rot. I once nicked some elephant grass from a field and used that as a background, fixing it in place the way that reed or straw is fixed in place instead of a lath wall. I once used the Ty Mawr lime many moons ago and liked the product, most of my lime is chalk based and I tend to slake my own stuff from fine kibbled quicklime instead of the lumplime. Lastly, the more water thats added to a mix then the weaker it can become which is why I prefer to use putty mixes instead of hydraulic or hydrated because a freshly slaked putty is quite wet then I leave the mix to amalgamate for a week or so before slapping it on the wall and then it's just right. Using lime you will get much better acoustics in a room and it feels warmer too. ( sorry about the red it changed colour and I've no idea why) I must say that having a sponge float like the ones used in the film really helps the work at times. All the best from Somerset.
@bhartley1024
3 жыл бұрын
Thixotropic, there's a word you don't often hear casually dropped into conversation.
@dq6365
2 жыл бұрын
Great video very helpful thank you
@angrydad1116
4 жыл бұрын
As former plasterer of 20 years or so a very informative video
@barrypeers8665
Жыл бұрын
these short courses they provide create alot of experts . you can not disguise or make up a lack of experience and knowledge that comes with decades experience .
@cocospops9351
5 жыл бұрын
Great video. Thank you very much.
@mw1460
Жыл бұрын
Hi, I want to use NHL 2 because its softer than NHL 5.Can I use the same sand grand size for all lime plaster coats ( from brick to final)
@manonamountain
4 жыл бұрын
Lime plastering...listed buildings or loadsa money!
@bellyfiore1
11 ай бұрын
For experienced plaster’s, good presentation.
@cyberlizardcouk
Жыл бұрын
would lime plaster benefit from mixing with plasticiser (admix)?
@andyclark9503
5 жыл бұрын
Really useful video, thank you. Whats the deal with all the criticism? I could hear the narration even with 2 2 yr olds in my ear.
@herbertmasing
5 жыл бұрын
Good comment!
@frankdasaintdituri9983
4 жыл бұрын
i like the music
@I_am_Rosy
5 жыл бұрын
Hi, good video, but you’re skimming over what looks like perfectly straight/flat walls. I live in an old cottage with wavy walls (which we LOVE) which we want to keep wavy, but make smooth... don’t know if you understand me there. We’ve just started on a “practice” wall, and we’re finding that using a flat trowel is extremely unhelpful because of the wavy ness. We’ve rendered underneath just as you have, but the walls still have their contours, and it’s hard to manoeuvre around them without making a ghastly mess! Any tips? Thanks
@Tehcarp
5 жыл бұрын
Rosy Whitehead squeegee
@iramaglia1
5 жыл бұрын
Mike Wye recommends using a Venetian trowel. Good luck!
@jaimehewitt2668
5 жыл бұрын
If its that uneven you can use what's called a harling trowel. And you dub the wall out slowly by throwing it at the wall building it out in tight coats i.e 10mm max coats until you get a reasonable flatness that you van get a trowel over it.
@mikede2331
4 жыл бұрын
Cracking video thanks
@swaminathanpattabhiraman2557
4 жыл бұрын
Useful
@free_soul00
6 жыл бұрын
how do i make it water proof without tallow is there a substitute for tallow ? love the plaster outcome and video ..
@dekonfrost7
6 жыл бұрын
Conscious Transmutation you can use wax and buff. But watch it i it freezes. Its simple but complicated. Waterprroofing works 2 ways. Trapping water in also, thats why waxing or adding tallow is risky. Also adding urea to the too coat can help. But depends on circumstances.
@mapsvg1954
Жыл бұрын
Google "Tadelakt"
@kapildevtiwari730
2 жыл бұрын
That's Slacked Lime. In India We Use LimeStone in Earthen Water Pitcher with Lid slack it with Water. The Reaction is Hot with Release of Lot of Heat. The Slacked Lime is Produced. Then used for Lime Paint.
@sakandi99
4 жыл бұрын
Top surface cot what matrial mix it
@Cazzahutch
4 жыл бұрын
What paint or decoration can be used over lime mortar?
@HouseFairyDIY
4 жыл бұрын
Distemper, limewash or other breathable coverings.
@dorianleakey
4 жыл бұрын
Why do you advise against the wavy lines method of scratching which has a scientific basis for its recommendation by manufacturers of modern gypsum plaster? Is it something to do with the lime that stops that perfectly logical way f doing it being acceptable?
@HouseFairyDIY
4 жыл бұрын
I would hazard a guess that it's because the lime needs a deeper cut into setting plaster to sink into and a wavy line would create an unreliable line that would be half collapsed.
@bloodeaglehohos7099
2 жыл бұрын
thx!!!
@tommy4244
5 жыл бұрын
What is the difference in price per square meter compare to modern plaster products?
@HouseFairyDIY
4 жыл бұрын
It's probably ten or twenty times the price but it's breathable and old houses need to breath.
@Jezzer2014
5 жыл бұрын
Very useful. Would be good to give reasons behind more of the recommendations, for us rookies.
@christophergray7330
4 жыл бұрын
What nearly everyone else said.
@rammohang4760
2 жыл бұрын
I would be surprised if anyone would choose to plaster their walls with lime plaster after seeing this video. You make it look so complicated.
@mebhi2
5 жыл бұрын
Why didn’t you use hair in the mix?
@dorianleakey
4 жыл бұрын
They clearly did, did you go off and make a cup of tea halfway through?
@HouseFairyDIY
4 жыл бұрын
I've finally found a use for my daughter's cut off ponytail.
@HalfManThirdBiscuit
5 жыл бұрын
Finally this SHOWS me everything I need to know.
@tonymar5164
2 жыл бұрын
Wow I didn't realize the amount of coats and work involved !
@user-pwfus
5 жыл бұрын
Gosh thats a hard working woman where do I find one like that?
@HouseFairyDIY
4 жыл бұрын
Hobbling about tending to her cuts and grazes.
@jacksticksmitch
4 жыл бұрын
Brilliant video. Shame about all the moronic comments.
@TheTreeOctopus
7 жыл бұрын
ready made lime plaster...now there's a thing!!
@jungsomewhat
4 жыл бұрын
Enjoyed the video, I just turned the sound off 👍
@mervynhardy6161
Жыл бұрын
Is this man a plasterer?
@roybennett206
3 жыл бұрын
Couldn`t listen the musaic was driving me mad.
@mgabrielle2343
4 жыл бұрын
you need to invest some money ina decent music mixer, otherwise smashing video
@garyvalencia4379
5 жыл бұрын
You have to be charging $300 per square metre....at that rate
@MrMarr123456
6 жыл бұрын
bet they charge a fortune going that slow
@nolee4580
5 жыл бұрын
Its a demonstration dude,not supposed to be going fast.
@Drdoombrain
4 жыл бұрын
Why no to wavy lines, aa wavy lines are stronger
@lenawebb-bey3642
6 жыл бұрын
Can't hear because music drowning out speaker.
@malibudolphin3109
5 жыл бұрын
What's being said? Damn background music💩
@accelwell7018
2 жыл бұрын
Fk is the name of this guy's company again?
@Majoofi
5 жыл бұрын
Music makes this unbareable
@garyvalencia4379
5 жыл бұрын
Like the track out of a 70's porn video
@stephenestes7430
5 жыл бұрын
Would've been terrific had it not been for that ANNOYING music! Why do people think we need music on EVERYTHING?!?!?
@HouseFairyDIY
4 жыл бұрын
Either music or commentary but not both.
@MrB3ngy
4 жыл бұрын
Spot and dab it!!!!!
@MegaBambooboy
4 жыл бұрын
Then watch the trapped moisture destroy your walls
@fuzzzeballs
5 жыл бұрын
scratch in waves not lines
@Losttoanyreason
5 жыл бұрын
Ruined the video with the music. Can't hear the voices. Totally useless.
@peaceout4774
5 жыл бұрын
Unbearable music sentances drop off useless
@marin4311
5 жыл бұрын
Why this loud and very boring music ?
@chrisbryson5720
7 жыл бұрын
will someone please get these some proper tools and show them how to use them
@dkaloupis75
5 жыл бұрын
Proper? What do you mean? Please be more specific
@HouseFairyDIY
4 жыл бұрын
They did an excellent job.
@tonyflynn8077
4 жыл бұрын
this is by no means a criticism, and I hope it is constructive. I do not intend to provide a plastering lesson, however, firstly; it is clear that the lady is not a plasterer and an instructional video should have a qualified tradesman to show the correct technique. There is a time honoured methodology for the application of any type of mortar and finish coat,, developed over hundreds of years - Right to left for the floating coat and left to right for the scratch and finish coats (vise versa for a left handed plasterer). There is good reason for this. The first (scratch)coat can be applied to take out the more pronounced undulations in the stone/brickwork. Wavey lines should be used as these are longer than straight or crossed and provide a key (the mortar can be mechanically fixed to the previous coat) for the following floating coat, which makes the wall perfectly flat and plumb. the depth of the lines should not go deep to the wall(say 3mm) and I see no reason not to apply these with a Scratcher rather than the traditional cross hatching as there are a lot more "fixings". I also see no reason for the traditional cross hatching as this is authentic considering the age of the building and has worked for centuries.The float coat should be "rubbed up" using a cross grain devil float as this fills hollows and cuts off high spots with nails ( I used to use five" at the front to provide a key of a couple of mm deep to hold the finish coat.The right tools should be a quality trowel and devil float (both worked in), a good hawk and a straight edge. Again there is a time honoured method in floating (applying the backing coat to a wall) although for small panels this is unnecessary.Hope this helps.
@rickweber1490
2 жыл бұрын
WTF, you ruined a perfectly good video with, I guess one could call it, music.😫
@davidsmith5023
4 жыл бұрын
Between the British accent and that awful music with the overdone subwoofer, I can't understood anything being said.
@njones420
4 жыл бұрын
speaking English with an English accent, how dare they! ;)
@lallenh1
5 жыл бұрын
I’m sorry dude but you don’t know what in the hell you are doing. You are no plasterer not even in the least. Please don’t try to show how to do what you can’t do yourself.
@HouseFairyDIY
4 жыл бұрын
It's lime plastering you moron.
@eoinob
4 жыл бұрын
@@HouseFairyDIY plastering is plastering and that's painful to watch. Dont know how they are in business never mind making a tutorial video
@HouseFairyDIY
4 жыл бұрын
@@eoinob There are different methods of plastering. Lime plastering is done in a different way.
Пікірлер: 85