Looks good. I wish the pocket clip was inset and not just sitting on top of the scale. Also wish the HRC was raised to a more appropriate range for 20CV, or used a steel like S90V that fits better in the 59-61 range. But the biggest question we never get an answer to is. Why are you charging $400 more for Damasteel? Even with the most PERFECT mirror polish on Damasteel a reasonable price would be $200 - $250 more MAYBE. With your regular Damasteel finish, it should be more like a $150-200 upcharge from the base models (assuming the handle scale materials are the same). Even custom makers don't charge that much for Damasteel with immaculate blade finishes. Keep up the great work. You had some amazing models last year and show you are capable of some high quality machining, even though some of the prices were a little up there (excluding the integrals). Now take that heat treat to the next level like you did with the milling, and bring it home. No point in having a fantastic-looking knife with an average heat treated blade, especially when prices start to compete with custom makers. Please take this as constructive criticism from a customer and not hate. I am a massive fan. I just don't understand taking quality to the next level and not doing the same with the steel and heat treatment, it's the part that does the job after all. Getting that 20CV up towards 62-63HRC (61-63), you would be outperforming all your competitors. You wouldn't want to buy a Porsche with a Polo engine in it.
@peen2804
8 ай бұрын
its a milled clip, theres no reason for it to be inset as its completely flush and theres no bottom "tab" to hide for thickness reduction and aesthetics like a traditional bent clip. having it be inset would add an angle to the milled clip, so the clip would need to be a little thicker at the attachment point and the opposite end, which functionally and aesthetically puts you back to square one ie a flush clip. its just more effort for the same result.
@el_blaxicano2
8 ай бұрын
i appreciated the Civivi Qubit for the acute point, and sleek lines when it's open. but the bottle opener kept me away. I preordered the WE version solely because it lacks the bottle opener, and I am looking forward to having it
@charlesard8639
8 ай бұрын
If I need a bottle opener, I will get one. Keep it off looks much smoother.
@sharkbate3
8 ай бұрын
Bottle opener is fantastic on the civivi, but eliminating both it and the recessed pocket clip slot make for a much cleaner, more refined aesthetic, which is a good call. I love having it on a knife that I don't have to worry about marring the finish, but I would never use it on an expensive knife. Edit: I would also absolutely love a slightly larger qubit, perhaps qubyte, as the atom is to the neutron.
@iamcumberbatch
8 ай бұрын
I like the bottle opener. I carry my Quibit most days in the Summer because of it 😊
@NWGCroler
2 ай бұрын
Mine has super strong lock stick. Any advice on how to fix it ?
@zackvega9596
8 ай бұрын
I usually like a smooth transition from blade to handle like this one has, but something about the bottle opener version just works and I love it
@oliviers4811
8 ай бұрын
Much cleaner lines without the bottle opener, it'd be nice to compare the blade and overall lengh vs the civivi qubit though..👍
@wasnt_it
8 ай бұрын
the knife looks much better without the bottle opening novelty
@bamabladez
8 ай бұрын
I am indifferent on the bottle opener. I think visually it looks better without but I gotta say I have used my Qubit to open a few beers. It was a plus but not a must have
@cubano100pct
Ай бұрын
You should have asked Melissa Miller as your co-host. She convinced me to get the Damascus Civivi Qubit.
@solomonkane408
8 ай бұрын
I didn't mind the bottle opener but I did buy the we qubit waiting on it now that polished titanium looks so clean can wait to carry it .
@bostick5362
8 ай бұрын
I like the bottle opener. One of the reasons I bought it.
@sobxscooter8157
6 ай бұрын
I like the cap lifter on the Civivi, but I'm glad the WE has cleaner lines. I would love to have seen the WE have PB washers.
@bamabladez
8 ай бұрын
My only complaint or wish would be for WE to make one with some milling on the scales. Milling always adds to the look and also hides scratches. Oh and WE how about some new steel!?? As a knife collector I hesitate to buy a new WE because of the same ol 20cv
@Mggibboni
7 ай бұрын
The spring tension on these is *very* strong. Still love mine!
@peen2804
6 ай бұрын
thats what makes these feel amazing so and insanely snappy for a button lock. i freakin love the tension on them
@dougdroid1248
8 ай бұрын
So glad the bottle opener is gone. I would not have done the pre-order otherwise.
@shamitoson
6 ай бұрын
Definitely no bottle opener.
@nazarivanov2517
8 ай бұрын
Super knife🔪❤😊
@kevins5498
8 ай бұрын
Glad the bottle opener was removed. I have no need for a bottle opener and it looks bad.
@eriklundquist3588
8 ай бұрын
That bottle opener is real classy. You should put one on all your knives.
@mattmilauskas5727
3 ай бұрын
that is an opinion you share with literally no one.
@Careoran
8 ай бұрын
oh Nooooo, why did you remove the bottle openener 👎
@squarebody4546
7 ай бұрын
No bottle opener, looks tacky.
@L2EDC
2 ай бұрын
Thanks for removing the bottle opener.
@sebastianm7451
8 ай бұрын
Bottle opener camp here ->
@MatthewdePaula
6 ай бұрын
Hate the bottle opener. Wish there was a Civivi Qubit without it too!
@kteagle3
6 ай бұрын
Hate the bottle opener! Only commenting because you asked.
@Youtube-Censorship-Police
2 ай бұрын
this is the knife that pops up when you google "pocket knife😐". i have one and it performs well, the design is absolutely dull and forgettable though.
Пікірлер: 34