Great work there. I need to learn this balance between make it perfect and make it done. Need to keep reminding myself to be productive and leave my perfectionist aside.
@AaronMakingStuff
4 жыл бұрын
Nikita Dugin I know! I rally struggle with that!
@tricky2k
4 жыл бұрын
Since I saw in another guy's tutorial about flattening points in a plane with Fredoscale, my life is much easier and happier. All the stuff you're going thru in 1:00:16 it's solved in a couple of clicks If you don't know what I mean, just grab all the "offending" lines/points, launch Fredo Box Scaling and it should be a pretty flat box, but not completely flat. Then grab the central point of the box and type 0. That'll put all of those lines/points in the same plane Oh, and with curviloft that happens a lot. Actually, with almost any surface in Sketchup that requires very small triangles, and that's what curviloft do to solve surfaces thru curves, throw a sh*tload of triangles that the Sketchup engine can't hold sometimes
@Nata_Kurniawan
Жыл бұрын
i watched this and damn my will to do sketchup never been this fire before 🔥 keep up the good work my man
@tricky2k
4 жыл бұрын
Solid Inspector 2 does a good job but sometimes misses things. Solid Inspector, the older version, finds the culprit 100% though doesn't fix the errors. I use both so, when SI2 doesn't fix the issue because can't find it, SI shows what's wrong to fix it manually
@streamingjunkie4397
4 жыл бұрын
Is there both a comprehensive and quick start tutorial on this channel for noobs? Also, is the trial version fully functional? Can I send floor plans to the printer?
@rulff
4 жыл бұрын
What is the device connected to the computer that you are navigating in the program?
@austbob7161
4 жыл бұрын
I can make a simple house and you can make a very detailed helmet. Nice
@DarkAutumn3D
2 жыл бұрын
GOOD OL' KAY-SEE!!!
@microsoftsarker
6 ай бұрын
Thank for this video & very helpful tutorial
@NerysOsbourn
4 жыл бұрын
Hi Aaron, what happened to the live model of Tower Bridge that was planned for a couple of weeks ago. Next week perhaps?
@vuduyhung7530
4 жыл бұрын
Kinda missed the livestream yesterday, since, well, I'm on the other half of the Earth. But I've discovered a kinda non-destructive way to use Solid Tools without having to destroy a solid component. Usually I would go inside to the mesh level of the Component, select all them mesh, and then Make Group for all of them. Afterwards, I would go outside, copy or cut the 'cutter cube', go back inside the component, and here's the trick, I would Paste in Place that cutter cube, and then just use the Solid Tools as usual. That way, the component is still saved and well preserved.
@AaronMakingStuff
4 жыл бұрын
Vũ Duy Hưng Great thinking!! I WILL be showing that idea in a video! Thank you!
@cyrillebataille7989
6 ай бұрын
😅 22:51 😊😊😊😊😊😊😊😊😊😊😊
@giulien26
4 жыл бұрын
is possible have a video abouth modelling head only with Sketchup tools?
@Jawad_Alhakeem
4 жыл бұрын
Hi Aron, I dont think I ever saw the biezer curve on my pc, is it an extension? Whos the creator? Thanks alot : )
@AaronMakingStuff
4 жыл бұрын
Jawad A It is an extension from the SketchUp Team.
@IronMan-yg4qw
4 жыл бұрын
is this really the best software to use for this?
@AesopEthiopia
4 жыл бұрын
No but it is easy to use
@sureshnaik5808
3 жыл бұрын
Design temple work in SketchUp
@Bennett_Lab
4 ай бұрын
maybe I'm getting old but I had a hard time hearing you clearly. Looked like good info though
@leonsantana3646
4 жыл бұрын
34:02 I have a bad feeling about this
@user-xs1bh4ke1m
7 ай бұрын
Are you available for hire??? I need you to do a project for me
@SketchUp
7 ай бұрын
As much as Aaron enjoys modeling, he has a full time job! If you join a live stream you can always suggest a model. Who knows, your idea might get modeled live then shared with the world! You might also reach out on our forum (forums.sketchup.com) and see if you can find a modeler over there!
@bryans5612
2 жыл бұрын
This the fucking way
@user-kv6xo7zy2n
2 ай бұрын
...
@Azraiel.Bridger
7 ай бұрын
if you took the time to make accurate line measurements you could model far more efficiently and accurately its glaringly obvious you did not even properly center the crest @38:40 and you're bezier also fell short.. the helmet is perfectly symmetrical with right and left halves
@giulien26
4 жыл бұрын
is possible have a video abouth modelling head only with Sketchup tools?
@ClintsGrievances
4 жыл бұрын
They won’t do that. They want you to *want* to buy the extensions.
Пікірлер: 30