Live Q&A #248 - 2-Sided Machining - Open Q&A
More down here ↓↓↓ Click MORE!
In this live stream I’ll be discussing 2-Sided Machining, as well as setting up a sacrificial spoilboard to keep from drilling into your table. This will be in addition to our regular Open Live Q&A, where I'll answer your general CNC or Vectric Software questions.
Remember that I host these Live Q&A discussions every Sunday at Noon Pacific Time, 3 pm Eastern Time, so SUBSCRIBE to my channel to stay up to date!
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Links to videos, Playlists, KZitem channels, products, and supplies as discussed in this video:
Link to my 2-Sided Machining playlist: • 2 - Sided Machining
Link to Michael Bernasconi's website: envision-creat...
Link to Michael Mezalick’s KZitem channel: / mezalick
Link to CNCnutz (Peter Passuello’s) KZitem channel: / cncnutz
Link to Laney Shaughnessy’s KZitem channel SpindleTV: / @spindletv
Link to the Vectric for the Absolute Beginner Playlist: • Vectric for the Absolu...
Link to the 3D Modeling for the Absolute Beginner playlist: • 3D Carving for Beginners
Link to the V-Carving for the Absolute Beginner playlist: • V-Carving for the Abso...
______________________________________________________________________________
Click the JOIN button to get access to perks: www.youtube.co...
Here’s a link to a KZitem page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: www.youtube.co...
Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing.
Link to Mark’s Other Channel. My second KZitem channel that’s dedicated to non-CNC related projects. / @marksotherchannel6970
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below:
PayPal: paypal.me/Mark...
___________________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
marklindsaycnc....
marklindsaycnc.com is sponsored by Harneal Media - a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com/
___________________________________________________________________________________
For more info, or to configure an Avid CNC of your own, visit their website: www.avidcnc.com/
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
www.vectric.com/
For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s KZitem channel: / vectric
Interested in hosting your own live streams? Check out StreamYard: streamyard.com...
__________________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Aspire #VCarvePro #Tutorial #Beginner
Check out StreamYard: streamyard.com...
Негізгі бет Live Q&A
Пікірлер: 8