Thanks for this video. It was very helpful to see how this Mast Pro pen handling different styles of tattooing. Result is great, thanks again!
@LuisRodriguez-dw1ro
4 жыл бұрын
Just found this channel and i love all these live tattoos cuz i learn so much thank you!😌🤟🏼
@maryetdave
4 жыл бұрын
The new style machines are so quiet, still mesmerizing. I want another tattoo
@draw.epic.illustrations
4 жыл бұрын
Thankyou for the information I also wanted to know if I was to purchase the mast tour pro pen what would you recommend buying with the machine ? I watched your video on supplies for beginners , would you get the same supplies needed forte Cheyenne spirit?
@outtathaboxxmindz6473
4 жыл бұрын
This video has been sooooooooo great for me to watch!!!!! Its 4:30 am in Atlanta and I'm up learning from you
@AndrueSOCAL
2 ай бұрын
Hahah you singing while tattooing is like what goes on in my head hahah but you actually sing good it’s funny I was like what is that singing hahahah but then it made me laugh like your buddy is prolly so used to it
@OLIVERAYRE
2 ай бұрын
@@AndrueSOCAL 😂 check my music out on Spotify LXCIFER
@AndrueSOCAL
2 ай бұрын
@@OLIVERAYRE bro will do
@samkavaman1980
4 жыл бұрын
How did the Dragonhawk work out for you...? Always LOVE your work bro. #Inspiration
@cerchiniosimon9466
4 жыл бұрын
Youre the best teacher i have and you also Tattoo super fast
@AndrueSOCAL
2 ай бұрын
So dope to watch you start that smoke!
@GQ3MindSpeaks
4 жыл бұрын
I have been looking into going to tattooing as a new medium for my art. I must admit I have always been a tad intimidated by the coil tattoo guns. The rotary style you displayed is amazing. I’m all in thanks.
@frankgar4560
3 жыл бұрын
How’s that going
@dustindarling5856
3 жыл бұрын
@@frankgar4560 I was wondering as well 😂
@thomas_shelby106
2 жыл бұрын
If you want to do tattoing, I must say you should do it! I am 27 yrs old now, and just started tattoing. I started to do minimal designs, and for the record I only tattooed like 3 persons so far and it’s really addicting.
@MikeOcksmallClips
Жыл бұрын
@@thomas_shelby106 no fake skins?
@thomas_shelby106
Жыл бұрын
@@MikeOcksmallClips I highly suggest you start with fake skins, I tried fake skins but it is much easier to tattoo on real skin but of course do it with confidence and calculated risk.
@ilkaysplashtattooberlin6357
3 жыл бұрын
Oliver I was amazed about that mast pen he is very great for Packing love this machin I wondered about the price but not everyone has to buy a expensive mashine and make good Tattoo I think if some one can't swimming he did not need new shorts.🤩send u much love
@Timyin21
2 жыл бұрын
Im looking to get my first tattoo machine to start practicing!
@wormmm6056
4 жыл бұрын
Overall how do you like the pen? & whats best pen’s to use
@11BRelo
Жыл бұрын
Awsome work. Just getting my machine tomorrow it’s the kit and some triple black from dynamic! I’m so excited to finally get started. It’s this very machine!
@brucewallace6511
4 жыл бұрын
Amazing work! Is the mast tour pro pen still working? Heard mixed reviews on them!
@ivanmendoza8457
4 жыл бұрын
I had one for two weeks i heated up the motor its not a great tattoo machine but i was used to tattooing with sol nova .....i honestly recomend sol nova or a bishop wand u cant afford those cnc make a pen with the same motor as the wand shader ......
@guido69x
4 жыл бұрын
@@ivanmendoza8457 Just change the motor inside for a bettter one and you are good to go with a better machine that it was before ;)
@ivanmendoza8457
4 жыл бұрын
@@guido69xi have faulhabor motors that are the same rpm and torque as the inkjekta flite nano titan i got them from my coworker they just dont run un lj ess they got 5 volts and up
@arturbaltazar2526
3 жыл бұрын
The machine is great for the price, if the motor dies you can replace it cheap. Just Look at aliexpress, there are endless parts for the machine.
@AndrueSOCAL
2 ай бұрын
7 minutes in if you pack it all black why did you do certain texture just to then make it all black? When it heals will it show the layers better and maybe the texture
@ivanmendoza8457
4 жыл бұрын
This proves something i was told in my aprenticeship its not the arrows or bow its the indian.its not the machine pulling out the lines and blends perfect stippling and whip shading its the artist i can tattoo with a prison rig and accomplish great things but it does help to use something ur comfortable using.
@XimenaZhaoArchive
3 жыл бұрын
Wow. Client sat like a rock. Great shading and highlights. Any tattoo artist who blames their cheap cartridge machine for the quality of their work can watch this video and be proven wrong.
@northernedgebullies7079
4 жыл бұрын
Good day mate, from CANADA..just wanna say I love what your doing for us amateur tattoo artists, and I need to ask a couple questions..1. What are your thoughts on the Dragonhawk Raven machine, as I have one and am just getting the feel for it? 2. Do u recommend cartridge needles over standard needles and tube systems? Cheers mate!!
@willflo7486
4 жыл бұрын
he's not an amateur...
@northernedgebullies7079
4 жыл бұрын
@@willflo7486 I didn't say he was, I said we were...god ignorant ass people..
@ta2101
4 жыл бұрын
Hey Oliver, Love the videos and how informative they are! Not to take away from the Mast Pen, I have 4 of Dragonhawks Extreme machines that work very well... I bet you would like the CNC Q3 short pen "The Pill" I'm totally blown away with the performance of this low cost machine.
@jeffhasting6620
4 жыл бұрын
Lawrence Small I’ve got the cnc Q-2 and it’s the bomb. I’ve been using it for the past 6 months and I’m not even temped to ever use another machine. I ABSOLUTELY love that machine.
@bigmanmike04
4 жыл бұрын
@@jeffhasting6620 hello, I was looking to get that machine. Have you compared it to the tour? How does it do lining and shading?
@jeffhasting6620
4 жыл бұрын
Michael Pylant I’m not sure if you’re talking about original tour or the new tour pro. But either way I’d go for the cnc Q-2. It’s a great liner, shader, packer, all around great machine. Also the tour has a weird sharp that’s harder to bag and wrap for me. I prefer the straight shape of the q-2. Theyre both great machines so I’d go with whatever you think would be comfortable for you to hold personally.
@jeffhasting6620
4 жыл бұрын
Michael Pylant is also recommend looking into trying out the Quelle cartridges. They’re super cheap Chinese cartridges but they’re the absolute best I’ve used so far.
@cristianespinoza9681
4 жыл бұрын
@@jeffhasting6620 greetings mate , have you tried the Hummingbird Bronc v10? If so is the q2 better ? cant decide which one to get . thanks in advance
@OscarG-ElMano-
4 жыл бұрын
brutal, at what voltage does the mast tour pro. I have it and it says that at 7.5V, but there are needles that go to 8V minimum, thanks
@jacobschwarz3429
2 жыл бұрын
Have you tried switching out the cams with a bishop wand, fantom or inkjecta cams? Heard you can even just switch the bar with a longer one to help give it a longer stroke? Curious your thoughts..
@AndrueSOCAL
2 ай бұрын
Omg bro then you start going bing bong bee bing bong beeeeee hahahahahah bro I know I’m commenting a lot but it’s awsome watching you work and listening to your inner thoughts hahaha
@miguelangelsilva4131
3 жыл бұрын
Amazing work!! I have a question though. I have a mast tour pro as well and am wondering what voltage you use & recommend for lining?
@Jorge100012228
3 жыл бұрын
Hey bro! You tried using a Round Shader? And the voltage! depending on your machine bro! But i go 7 to 8.5 depending on skin. Round shader will get ya that fast ass lines you looking for.
@twistedink361
3 жыл бұрын
Voltage depends on your hand speed. I usually line at 7.3-8.5 depending on skin. Color packing in upper 6 and smooth shading upper 4 through 5.5
@thomas_shelby106
2 жыл бұрын
Hi Oliver, just wanted to ask what camera you use to record your vids?thank you
@robertbayles846
4 жыл бұрын
Much love homie all the way from Louisiana!!
@sfhoangs6000
3 жыл бұрын
Rxrdr..uh
@emmanuelgadek4989
4 жыл бұрын
Is this low cost machine really good for shading and mostly for lining ?
@knucklezdezigns3378
4 жыл бұрын
watchin ur style bro...Maryland here......thank you for vidz.
@moisescrespo6021
2 жыл бұрын
Do you recomend it bro?
@venomanonymous916
4 жыл бұрын
Hey Oliver! Love your work. Been watching you for awhile. Got a question. I have the Cheyenne spirit and got Cheyenne safety cartridges like you are using in this tattoo. And the mags (like the 9-13 soft edge)when I put them in and press the switch, it doesn’t move. But if I take out the cartridge then run the machine and then put cartridge back in it will but as soon as I let off pedal I have to take out put back in to make it run??? Any ideas why!!
@goat5843
4 жыл бұрын
Try increasing your voltage what power supply are you using?
@venomanonymous916
4 жыл бұрын
goat I’ve turned it all the way up to 13v it only does it with the Cheyenne Cartridges. Even tried the craft ones. Not a very expensive power supply. Bronc power supply
@fuchhe5270
4 жыл бұрын
13m1 or 13m2 which magnum you are using ?? Which magnum is better for colour packing (full black) m1 or m2
@BoY860
Жыл бұрын
how are these machines with bold outlines?
@merlon2278
2 жыл бұрын
How did you make it all tattoos... Any blinding..???
@saint438
4 жыл бұрын
It’s a direct drive. An artist in my shop has one and loves it. Your work is amazing man. My daily driver is Inkjecta, but I used a Bishop for the first time the other day and now I want one.
@AndrueSOCAL
3 ай бұрын
Bro you are a beast that is amazinh
@AndrueSOCAL
2 ай бұрын
Post man pat with his black and white tats earlllly in the morningggggg hahahahha
@josephsolorio5652
4 жыл бұрын
Happy Tuesday! Noob tattooer. Shout out here from Las Vegas!
@n55335i
3 жыл бұрын
Gave the eagle a milk mustache 💀🤣🤣🤣
@karlosartist7400
4 жыл бұрын
Hello, thats amazing work, please, what brand of ink u using ?
@gothicstink752
4 жыл бұрын
Its literally sitting on his station
@TinkersCloset
4 жыл бұрын
Kuro Sumi is the best ink out there highest pigmentations, purest ingredients and FDA standards. Make sure it’s authentic as it’s made in Japan and sold in America not China. Hands down it has stellar reviews.
@pierrott59710
4 жыл бұрын
@@TinkersCloset it's not made in Japan I have the bottle in front of me it's made in the USA
@pierrott59710
4 жыл бұрын
Dynamic ink it's the blaclk bottle on his workstation
@steadyworking8664
3 жыл бұрын
@@pierrott59710 m Po
@georgesmith5933
4 жыл бұрын
I just ordered this item
@ulashanbayak5094
4 жыл бұрын
is it good ?
@brucewallace6511
4 жыл бұрын
How does it run George Smith?
@xentattoo6464
4 жыл бұрын
Again - doesn't matter what kind of machines using tattooer. Everything depends on his skills
@rebelangel8227
3 жыл бұрын
Ha I noticed in chat someone said tats are from the devil...God thinks of everything...so the divine gave us a tiny layer in our skin so we can decorate our spiritual temples lol
@Devious480
4 жыл бұрын
You asked him if it was still numb..did you put something on there to numb it? If so what did you use?
@ericsoliz8286
3 жыл бұрын
Whats the motor set to?
@denishnamte3932
4 жыл бұрын
Hi Oliver... I'm from India... I like to ask you some question,can i use any tablet to draw and used a procreate apps..??? Which support smart pen for tablet...
@magibomagibo4451
3 жыл бұрын
Procreat is for apple tablet only
@denishnamte3932
3 жыл бұрын
Thank you Oliver... Best of luck
@876Tropics
2 жыл бұрын
Is the mast your good for starters?
@kchun5515
4 жыл бұрын
that is not an eagle. its a hawk. just like ur pen. dragon "hawk"
@cesaralcala1926
2 жыл бұрын
How many Bold you using
@Timyin21
2 жыл бұрын
Is this the mast tour pro?
@bulikhba
3 жыл бұрын
Is this the pro version , and did you use the mast tour S version by any chance
@twistedink361
3 жыл бұрын
The Mast Tour S is just the Tour with a different grip.
@fabiantechnician2797
4 жыл бұрын
nice work, i just received my dragon hawk mast pen but its not the tour pen? i hope its as good as the tour pen. is the needle adjustment at the top or bottom i see you have it nice and wrapped how do you adjust needle depth? thanks again
@chrissilk4093
3 жыл бұрын
What brand of needle tips did you use?
@t.m5085
4 жыл бұрын
The machine still working? Its real one like the other machine? And also its good for drawing texts?
@Psartz
4 жыл бұрын
These machine are good when new but get weaker as brushed wear down.
@traviswinchester972
4 жыл бұрын
Did you do the existing work on the bicep as well?
@FrankieKato149
4 жыл бұрын
Beautiful work u are a True Master
@richardstevens7923
3 жыл бұрын
I ordered a tattoo kit and the grip that came with it is small for like a child hand I was like who is using this my child lol so now I gotta order new grips witch is fine
@arundell12
4 жыл бұрын
What voltage you running that at bro? I just bought a halo 2 crossover and turning it up above 7.5 volts sounds vile haha
@tonymartinez822
4 жыл бұрын
Hey pendejo find your own voltage that works for you theres no magical voltage for lining. Or shading try the same voltage your vibrators set to
@snakeeyes1662
4 жыл бұрын
Voltage is the speed work out what 100cps is and try that
@muradtattoo3250
4 жыл бұрын
Woooow nice work 🙌👏✌️👍👍👍
@tonydavey9084
4 жыл бұрын
hi oliver do u use dynamic ink for your greywash ,and how do u mix it with distelled water ?
@justingill7660
4 жыл бұрын
use witch hazel to mix with dynamic
@lukejDaPlugsplug
4 жыл бұрын
Thanks , great job as always oliver!
@josephpeters4079
4 жыл бұрын
did u ask him if he still numb? u use numbin cream?
@rl6468
4 жыл бұрын
Amazing live video, hitting the like* already
@lavinsky4503
4 жыл бұрын
Which brand of cartridge do you use
@Thais_oliveira_tattoo
4 жыл бұрын
Os cartuchos são universal?
@mohamadfeyzabady8014
4 жыл бұрын
It's unique Really artistic
@kelvinreyes8479
3 жыл бұрын
What stencil machines do you use ?
@sadico-es5yq
4 жыл бұрын
What is your secret so that the stencil is so solid and does not fade easily
@twistedink361
3 жыл бұрын
Drying time
@ericpelletier4108
4 жыл бұрын
Ten years I tattooed with a guitar string and a electric razor... I just bought a dragonhawk pen and a bunch of supplies. Can't wait to be able to shade and lay down ink the way you do. Bought some practice skins but honestly I'm ready to jump in head first!
@shakes6551
4 жыл бұрын
lüv your artwork mate, has this machine got the same ammount of power of putting ink in the skin, just like a coil machine?
@aceartdepot6198
4 жыл бұрын
SHAKES did you not watch the video?
@shakes6551
4 жыл бұрын
@@aceartdepot6198 no why?
@aceartdepot6198
4 жыл бұрын
SHAKES cuz he answers that exact question halfway threw the video
@shakes6551
4 жыл бұрын
@@aceartdepot6198 i had music on as i watched the clip, so i didnt hear anything mate. I was mainly just watching his technique
@truthprevails2645
4 жыл бұрын
Where can I order supplies like cartridges, ink, stencil paper etc. I am looking for a trustworthy and affordable website or store!
@smokedout1993
4 жыл бұрын
Sadly unless you have either a tattoo license or a shop license, most actual professional websites will not sale to you, but you can actually find quality stuff on amazon. They have hundreds of brands of carts, real usa made ink, and genuine spirit transfer paper. Along with all the goodies like machines, stencil stuff liquid (I prefer anchored). Check them out, you'll be surprised. Most importantly, read reviews before you buy!
@jjbuschpokemon6846
4 жыл бұрын
Redeyetattoosupply fb
@OFWGKTA126
4 жыл бұрын
Fire 🔥
@gabbyocasio3448
4 жыл бұрын
hi so im just starting out so can you explain your machine angles and gun movements as you go please
@dylananderson4895
4 жыл бұрын
What solution do u use to wipe of the excess ink?
@tonymartinez822
4 жыл бұрын
Your mom's squirt juice
@dylananderson4895
4 жыл бұрын
Actually not a bad name trademark that
@jjbuschpokemon6846
4 жыл бұрын
Green soap ... Mercari app
@michaelgrijalva8479
4 жыл бұрын
I bought that tour pro pen. Ran it at the 7.4 volt I got 3 hours out of it, & the lil fucker froze up in the middle of the session. Yours still hittin? I'd just like to know, maybe I got a defective product
@alleymusic89
4 жыл бұрын
buy the mast coil machines they are better
@beatsbysacred
4 жыл бұрын
I have mast tour pro pen, and it has done wonders . Def not froze , it only comes apart in to 3 main pieces, I would check and c what’s causing it to do that. Y u always need to b familiar with machines your using . Good luck
@twistedink361
3 жыл бұрын
Look for quality flat motors to replace the frozen one. Ebay, AliExpress, etc.
@avaundastanton627
4 жыл бұрын
How can i get your videos
@karaiumtattoo9926
4 жыл бұрын
Forever fan
@CesarGutierrez-pc9ms
4 жыл бұрын
Congratulation! Brow tanks for show us the vídeo un real time
@CesarGutierrez-pc9ms
4 жыл бұрын
I'm folowing You from Tijuana
@claudiosaldivia5646
4 жыл бұрын
Nice job man..
@sushinktattoo1366
Жыл бұрын
Old vid but it’s seems your opinion changed about this machine later. For $140 you can’t beat it
@OLIVERAYRE
Жыл бұрын
Yeah it’s crap! Nothing compared to the machines Im using today! Also having a lot more knowledge today
@Epichero256
4 жыл бұрын
What voltage would you say that machine would do great at ?? And which cheap power box would go with that ??
@tonymartinez822
4 жыл бұрын
Let me just let you in on a lil secret tattoo artists fuckong hate when ppl ask what voltage they run on what machine there's not one perfect voltage for every machine for lining shading etc. Find your own fucking voltage that works for you and stop looking for answers to your stupid questions on youKZitem
@Epichero256
4 жыл бұрын
Thanks man 👍🏽😘
@Nellyyyyyyyy
4 жыл бұрын
I guess tony found out the hard way lmao
@kalo7123
4 жыл бұрын
@@tonymartinez822 why are you getting all butthurt he's not asking you is he? no need to be an asshole Olyver doesnt need you to answer for him... douche....
@naatali4393
4 жыл бұрын
what I found, it there is no answer for that question...what voltage?? ( I am an apprentice, and I have to admit, I asked the same before!) to many things to know : what style, packing color or B&G , your hand speed, size of needle , for some machine,you have many adjustments...etc...etc...I suppose that you know that....what you can only learn by experiencing it by yourself, this answer make me feel so angry at the begining, I was looking for a go to set up, ... it is by the way a good question, even if there's no, I think, one perfect answer .... now, I understand why nobody was answering me, not that they did'nt want to , but they can't 🙂
@omarmelgoza2772
4 жыл бұрын
Hey can u do a video on what ptinter you use and how to print stencil of procreate ? Your work dooe as fuck..thanks keep it up bro
@a1guitars
3 жыл бұрын
So you raved about this machine in this video and a few videos later you said its shit. So what is it?
@jojomafia3851
3 жыл бұрын
I'm thankful I saw this comment! 😂 I hear the atom packs a better punch but the bronc v6 is even better
@MoonNewin
3 жыл бұрын
Is the guy getting tattooed… asleep? 😳 No twitches or whimpering in pain…is he alive?!
@samdeeparora4558
4 жыл бұрын
Machine price tatoo
@remone2013
4 жыл бұрын
Hey bud! What voltage are you using on this machine?
@remone2013
4 жыл бұрын
@@ghostfacekillah5714 I didnt have a chance to listen smartass.
@cemonat2677
3 жыл бұрын
He was die?
@OlgaSeryalnikova
Жыл бұрын
лучше б не переводила. 15 минут ждала пока сеть переведет, думала что-то будет нормальное,какие-то лайфхаки или не знаю, а они бред такой несут, капец
@fermanagustin2278
4 жыл бұрын
hi sir master. what kind of magnum you use. m1 or m2. . thanks for answering sir . you rock .
@jacobgoodwin4990
2 жыл бұрын
The artist I go to uses a machine for almost all of his line work it’s not that style it has wires that get attached to it but that thing is hard hitting as hell I hate it
@nicolaspambo6997
4 жыл бұрын
dragon hawk is best in china tattoo machines other equpments i dont like important needls
@benfrombc
4 жыл бұрын
do you recommend using tattoo pen for beginner ?
@OLIVERAYRE
4 жыл бұрын
Ben Calm yeah man! Decent machine! Pretty hard hitting so ink should go in easy! As long as you don’t over work the skin! Just have slow consistent hand movements and you will be fine!
@benfrombc
4 жыл бұрын
OLIVER AYRE Thank you, looks really cool Are you done with this bird or you will put more details next time he come back
@metti3155
2 жыл бұрын
💣
@myname1807
4 жыл бұрын
Nice!
@richardstone9350
4 жыл бұрын
Dragon hawk
@sadico-es5yq
4 жыл бұрын
the speed king
@gattookhushalani9642
4 жыл бұрын
SUPER
@srehashrestha
4 жыл бұрын
Is this machine worth it for beginner???
@halfevilwelding5268
4 жыл бұрын
Sreha Shrestha yes yes yes
@srehashrestha
4 жыл бұрын
@@halfevilwelding5268 Bought it 😅.
@brucewallace6511
4 жыл бұрын
How does it run? Alot of mixed reviews on this machine!
@jjbuschpokemon6846
4 жыл бұрын
Mercari App.... Tattoo kit... Get a basic one get familiar
@KevDontSweat
4 жыл бұрын
Why aren’t you using the inkjecta ?
@tonymartinez822
4 жыл бұрын
Because he wants to switch it up pendejo
@postmalonee6560
4 жыл бұрын
@@tonymartinez822jajajajaj si es un pendejo con esa pregunta bro
@kevinmccabe9188
3 жыл бұрын
Can’t hear the commentary vert well
@robertschackart4114
4 жыл бұрын
Just bought this pen..whats the suggested voltage?
@justingill7660
4 жыл бұрын
I run mine from 8v to 10v. depends on skin .
@isicat5112
4 жыл бұрын
how do you like the pen? Is this pen quiet? Cause i want a pen, but I hate loude and vibrating machines. Thanks a lot :-)
@justingill7660
4 жыл бұрын
it's very quiet but depends on what cartridges you use. some louder than others. but really for the price it's a great machine.
@isicat5112
4 жыл бұрын
@@justingill7660 Thanks a lot for your answer. Yes I know this Problem. I often have this problems wiht the kwadron-cardriges (magnums and softedge).
@brucewallace6511
4 жыл бұрын
How's this machine holding up? Heard alot of mixed reviews on it!
Пікірлер: 197