This is a great video to tell me what tools I need but what I want to do is take the bracket out that separates the big seat from a little seat and I want to take the side plates out cuz I'm dropping a big box in the back seat I'm going to use the back rest and leave that intact but I want to take everything else out so all I have is clean floor
@nickolausedwards7036
Жыл бұрын
Great idea, unfortunately I don't how to remove the OEM middle plate. But the side plates unbolt and those come right out. If you see in the video I had to actually remove the sides in order to get the new mounts underneath it. Good luck!
@adamcone6856
3 жыл бұрын
I'm not lifting my seat yet, but am taking the rear seat and back out to install an amplifier and new wiring. That bolt on the passenger side that goes through the floor is not wanting to come out at all. I just bought some PB Blaster to try and loosen it up. I don't want to shear it off, but may need to be cut or break off to get that bar out. Thanks for the video!
@nickolausedwards7036
3 жыл бұрын
Good luck and take your time! That screw sucks AND it's long as hell lol
@903flores
3 жыл бұрын
It has loctite from factory. I had to use a heat gun to heat up the bolt. Came out super easy after that.
@alexsnyder1412
Жыл бұрын
Good video. I'm doing the same thing for my 04 f150. Thanks for making
@nickolausedwards7036
Жыл бұрын
No problem 👍
@lwisdawg
10 жыл бұрын
i just put the exact lift in my 05 f 150 and you're doing it totally different to what i did, and mine turned out perfect
@stevenlarsen1691
2 жыл бұрын
Harbor Freight needs you bad.
@nickolausedwards7036
2 жыл бұрын
Huh? Why?
@lovelandllc6464
2 жыл бұрын
Please point me to the video that details how to remove the seat back
@nickolausedwards7036
2 жыл бұрын
There are a bunch on KZitem now. I JUST typed in 2004-2008 F150 back seat removal. Try this one. If not, just perform the search as I did. Good Luck! kzitem.info/news/bejne/14OCm4GgnWqBZKQ
@erinlarson2012
10 жыл бұрын
I worked for lee and he owns lmi and designed the kit. It was pretty cool how they work, even put one on my own pickup.
@erinlarson2012
10 жыл бұрын
Im on my girlfriends profile
@texanbalaban6777
2 жыл бұрын
@@erinlarson2012 hi
@dougbauer891
3 жыл бұрын
Only video I could find to give me in info I needed to figure out how to get to my rear glass motor 🤘🏻
@nickolausedwards7036
3 жыл бұрын
Glad it was helpful for that too!
@deangelolucero6282
8 жыл бұрын
it did thank you you're video is the best one I've seen for these year model trucks thanks again
@Legal_Addiction
10 жыл бұрын
Yeah your video is much better then mine, great video glad you were able to get it installed, however I put the brackets on top of the factory bar and not under it.
@nickolausedwards7036
10 жыл бұрын
Don't get me wrong...your video was the only one of its kind that I could find anywhere close to what I was trying to accomplish. Just not detailed enough with no instruction at all. But I played and paused and played and paused your video a thousand times too see what you were doing! Thanks for being the pioneer!
@Legal_Addiction
10 жыл бұрын
Yeah I figured something was better then nothing at the time.
@danwhitaker9168
4 жыл бұрын
I put my brackets on top as well. The side braces for the lower seats wouldn't clear the end of the bar otherwise. What really irked me were the large washers that go on top were not in my kit. Luckily I had some large washers on hand. I had to drill them out but they worked. I would have gone to a hardware store, but hey were closed already due to COVID-19
@Legal_Addiction
4 жыл бұрын
@@danwhitaker9168 that sounds like a really good idea if I didn't have my engine completely stripped down. I'd redo my setup. I'd like to be able to make a box that are the seats
@kingdavid3194
6 жыл бұрын
Thank you for this video. I appreciate people like you who understand. These places dont like the DIY folks lmao
@thomasv5596
3 жыл бұрын
what is behind the felt
@nickolausedwards7036
Жыл бұрын
The metal frame of the truck.
@nuclearthreat545
9 жыл бұрын
good video thanks for helping us
@k.v.b.1865
8 жыл бұрын
Thank you
@mikeyounkin7310
Жыл бұрын
Why do you have to have the side plates?
@nickolausedwards7036
Жыл бұрын
I had to keep the side plates because my box fits INBETWEEN them. Plus my seats are still intact and useable. Hope that helps!
@sirmartinez5276
9 ай бұрын
Got an 2007 f150 crew cab (super crew) planning on doing the seat lift. Will it give you enough room to do 8" subs front firing?
@hatteraslabuf
3 жыл бұрын
What’s the purpose of raising the seat 2 inches?
@nickolausedwards7036
3 жыл бұрын
I put 2 12's under the seat. I didn't want shallow mount subs, so in order to fit a box for regular depth mounted subs, I had to increase the room under the seats. Hope that helped!
@harrytenner9778
3 жыл бұрын
Are those clips standing up or laying flat across the bar?
@nickolausedwards7036
3 жыл бұрын
Clips are just how you see them in the video bud. They stand straight up like that. Hope that helps!
@nickolausedwards7036
11 жыл бұрын
I'm not sure which bolts u r referring to. Maybe part 2 of the installation will help? Let me know
@jonroberts6518
5 жыл бұрын
I have a 2005 model SuperCrew, I have dual 10 in woofers now probably building my own box, I need a little bit more height towards the back of the seat, but would like to know what box you were using in your video, I may be going to 12" x2 skar audio, thanks for the video it'll probably help me out a lot. My old downfire subwoofer box I have the front of it is just right the back is too shallow and my tens won't fit I need at least 6 and 1/2 mounting depth
@crude4u1948
7 жыл бұрын
Just a word of warning. All this time I thought I had a 2007 F-150. After looking for an hour for the black clips that were supposed to be along side the child seat restraints, I decided to look at my vehicle ID tag on the door. Turns out, that after owning my truck since 2013, I don't have a 2007 but in fact an 08/2006 model. And the search continues for how to removed the rear seat back.
@nickolausedwards7036
10 жыл бұрын
lwisdawg my install turned out perfect. Maybe they fixed the directions for you or maybe you got different ones? I have no problems with it now. I'll try to post another vid later, with the box and subs I ordered to show everyone.
@1671341
3 жыл бұрын
Where can I find this kit
@nickolausedwards7036
3 жыл бұрын
You may have to call. 1-800-345-5623 is the number I found online. I also replied to another comment here the link to the page I bought my box and lift from. God luck!
@abb1129
9 жыл бұрын
thanks for the video, I have a 2006 king ranch and going to try this as well. how did the bottom set fit after all of this was installed? Do you have a video of your box install or bottom seat install? Thanks
@XCXFlashBang
11 жыл бұрын
mean 05 supercrew
@09jlivers
7 жыл бұрын
So the 3 back clips go back in even though you've lifted it up 2 inches?
@nickolausedwards7036
7 жыл бұрын
Jonathan Livers..Yes sir it does. With no problems. Remember you are lifting the bottom seats. The seat back stays in the original position. You really are only removing it to access the screws on the bottom. Anything else let me know!
@sukitezy32
8 жыл бұрын
do u think u could add washer to those brackets to get more lift. even if its only lk .5 in itll help lol. i dont feel lk buying shallow mount subs
@nickolausedwards7036
8 жыл бұрын
It is very possible, albeit a little dangerous I would think. Washers are just meant to give a scosche of breathing room. To allow bolts and nuts breathing room between the object they are tightening and to prevent stripping and metal on metal wear and tear on said object. Unless you have a really really thick washer, I wouldn't attempt to do that. The more you add trying to get your required height, is going to complicate things when tightening them down. IE....moving around, sliding etc....etc...It would be interesting to see though. Let me know how that works out for you! Thanks for watching!
@JoseMartinez-jf2iy
8 жыл бұрын
Could you give me a link to order that kit olease
@nickolausedwards7036
8 жыл бұрын
Do keep in mind that this link is to the box that will fit two 12's. The box REQUIRES the lift kit. And this link is only for a 04-08 Ford F150 Supercrew. www.supercrewsound.com/04F150SCrewUTSdual12.html#menu
@marlonnewman170
3 жыл бұрын
Hey where did you get those from I can’t find them on line
@nickolausedwards7036
3 жыл бұрын
Lmiwelding.com
@FuckYouTubeCensorship2024
7 ай бұрын
Thank God for your video, got the LMI kit for our 06 f150 and those ibstructions are horrible and confusing af. Now i have a good idea how this goes in. Any chance you coukd do a quick video on what actually needs do e for the center bracket with the pivot studs. We got 2 12" dc audio shorties going in a underseat custom built ported enclosure on NVX VAD1000.1 and NVX VSP65 components in each door going to a NVX VAD1000/4.
@XCXFlashBang
11 жыл бұрын
which kind of bolts do u need after installing the lift? what bolts go back in the 4 main front legs in the front of the seat? i have a 01 supercrew and they dont have anything for it that iv seen as in seat lift
@deangelolucero6282
8 жыл бұрын
can you take off the bottom seats with taking off the top?
@nickolausedwards7036
8 жыл бұрын
Yes you can. They are held in by the T50 and T40 on both sides. Once removed, you push the seat to its respective side of the truck and they slide off the stock pivot bracket in the center of the truck. It is difficult though. Two of the bolts holding the seat in place are hidden further back on each side with the seat at stock height. It can be done....though easier with upper seat removed first. Hope that helped.
Пікірлер: 55