Absolutely fantastic! Such an intriguing setup - thanks for sharing the diagram!
@isotoxin
Ай бұрын
Thank You for support! 🖤🖤🖤
@DJASGROW
Жыл бұрын
yeah sounds really good! Love it!🤩 keep it up!✅
@isotoxin
Жыл бұрын
Thank You! 🥰 When I'm listening to Your mixes, for me, they sound so polished compared to my raw results. 😅
@DJASGROW
Жыл бұрын
@@isotoxin Thanks a lot mate, I'm glad you like my mixes! I love yours too!!!!😍
@rdalex00
Жыл бұрын
niceeee!
@isotoxin
Жыл бұрын
Thanks for support Alex!
@DanielleKingdjdinosaur
5 ай бұрын
thats a lot of buttons
@isotoxin
5 ай бұрын
Not only buttons! Knobs too! 😊😁🤭
@ME-HIGH-LOW
8 ай бұрын
Great set! I have a question regarding K2. Do they send midi message right when you feel/hear click, or you need to apply extra pressure? I bought 2 brand new units, and returned them within 24hours because one unit did not have any click at all after pressing any button, and the other one had clicky buttons, but they did not send midi message upon clicking. I had to apply extra pressure to send midi. I need new pair of K2s but this absence of quality control bothers me.
@isotoxin
8 ай бұрын
Hey, thanks for comment and question! My both K2's was bought not new (at least one of them is used more then another) but all knobs with buttons doesn't have any clicks. They sound more like louder version of button pressing on the same K2. Here is the video and sound: mega.nz/file/Yw4wnTaC#urrvRZN_QWnK1fNIiiF2NmDR-T0ZzXVCXdaz9vbVnRM And Yes, the reaction from knobs pressing is instant. There is no need for more force to press the knobs.
@ME-HIGH-LOW
8 ай бұрын
Thank you so much for the effort, but i meant the 4 x 4 rows of buttons, not encoders.. :) Encoders usually have dull click, the buttons are sharper. I have had 3 xone k2, and all were the same untill this series i got fiew days ago. @@isotoxin
@isotoxin
8 ай бұрын
@@ME-HIGH-LOW LOL, sorry, I have misunderstood the question. 😅 The buttons are weirder thing. They sound different (here is another video with button pressing: mega.nz/file/I45xACiD#lLhmpQbaBDwIQQOgTfpjNuMJqQqSlPqg0VavBqYhIrQ) But the behaviour is the same for all buttons. The response is the same to the same pressing force. BTW I know what You mean. I had bought one used X1 MK2 and afterward even resoldered few buttons because of this problem. But this sounds like a intensively used device problem. For example, the mouse buttons after high pressing count (I'm talking as a Diablo player) will start to do same thing. The new devices should not be like that.
@ME-HIGH-LOW
8 ай бұрын
Thank you so much for recording this! Yeah, one K2 had the click, but it did not react (did not send midi message even if you hear the click of the button) but it needed to be pressed harder, in order to send the midi message. Both units were brand new from the store. That's why i'm asking lot of people about this. A&H must have changed the factory or something like that. 2 brand new units, completely different. Thank you once again for your time!
@juhnefertiti9218
3 ай бұрын
Could you make a video showing how you connect everything, cables, audio interface you use...etc? Thanks
@isotoxin
3 ай бұрын
Hey. I'm actually have this picture. You can find all the information You need in this graph: mega.nz/file/spBH3DzY#s6sb9wp54q9q558N6wiDbaRlW4XlbXhF4l1AdeCjMtY
@natetarrh9146
Жыл бұрын
good stuff! are you using richie hawtin's K2 mapping?
@isotoxin
Жыл бұрын
Hey! You are right! I'm using Richies mapping for K2's and Launchpad.
@daddytd2300
Жыл бұрын
Great setup! What audio interface are you using for 6 channels and the sends/returns?
@isotoxin
Жыл бұрын
I have Behringer UMC1820 with and additional ports expander Behringer ADA8200 connected via ADAT cables.
@SameMan020
4 ай бұрын
@@isotoxin Have you issues with this card. Can you tell me about latency and cpu usage?
@isotoxin
4 ай бұрын
@@SameMan020 Hey! Thanks for the question! Actually I don't have any issues with this audio interface. The sound quality of preamps and outputs is perfect. And for the price of 260€, there is no competition with this amount of inputs and outputs. I will check the latency status on todays evening and will add another comment with ms and samples. Oh, and because I'm using the interface with a Ryzen 5800H, the CPU is more than enough to use this gear and not have any CPU issues with it.
@SameMan020
4 ай бұрын
@@isotoxin Thanks. I have model 1.4, k2, lunchpad and for the interface motu ultralite mk3 . Sometimes i have poping sound from my speekers and the cpu usage jumps constantly from 10-60% and sometimes works just fine. Btw i use i7 7700hq for the cpu. Its time to buy another interface. So I want to know if the umc1820 works well?
@isotoxin
4 ай бұрын
@@SameMan020 Yeah, I see the MOTU MK3 is on the older side. And it doesn't have official drivers for windows 10/11. I could make an assumption though, the reason for this CPU spike is not the audio interface itself. Especially not with Intel CPU. BTW, You are using MAC or Windows?
@user-fe9ws7dh4k
7 ай бұрын
is this hawtins scrpit for bitwig?Cuz i really want it for ableton
@isotoxin
7 ай бұрын
Hey! Yes, it's Richie Hawtins script but as You have said, it is for Bitwig only. :(
Пікірлер: 30