We Run the NHX 10kW inverter through its paces.
Using Silicate Gel Batteries
Lithium Batteries
Unbalanced load test with:
Shop Air Compressor
Chop Saw with locked Rotor
11kW of heat guns
and finally charging a Ford Lightning
Unit is UL1741 SA - Rule 21 approved and is in the California Approved List.
Can be used for Grid Tie, Off-grid, Peak Shift etc .
Features 4 x 500V - 3750W independent Solar inputs
Available at watts247.com
Description
00:00 Intro
03:38 Tigo Optimizers on a 15kW array in snow
04:29 Inverter Load Testing overview
09:15 Starting a compressor under load
09:57 Compressor and Chop Saw startup
11:16 Saw startup with locked blade
11:51 Compressor and Chop Saw cutting wet wood
12:15 Heatgun Test with Solar , battery and AC power
13:56 Heatgun Test with Solar & battery only
15:13 Overload reset
15:15 Basic Setting run through - Lithium Battery settings
19:15 Silicate Gel Battery Analog vs Digital Battery in cold weather
20:18 CAN BUS Lithium addressing
21:00 Why Closed BMS loop communications is important
22:30 More on our rack batteries
23:00 Charging our 48V Forklift batteries
24:50 EV Charging - Ford Lightning at 40A / 9kW
28:08 Two 10kW units in Parallel (20kW) running the operation
29:44 Using the AC Coupling feature and the Aux Output
35:04 Water Heating ideas with the Aux Programmable Output
Негізгі бет Load testing the 15kPV NHX 10kW Hybrid Inverter (Saw, Compressor & Ford Lightning) @ watts247
Пікірлер: 12