I saw another guy who bought some cheap plastic automotive gArage ramps he put those on the inside of the trailer. They sat on a angle but worked perfect
@dickbielenberg957
3 жыл бұрын
Use a floor jack to pivot the machines. Load all from the rear.
@jimmy450r
3 жыл бұрын
This would let him use trailer for other hauling also. With all those boards screwed down it's a single use trailer. Also the quads will ride far better lever on all 4 tires and be much safer with rails on both sides.
@ryanteter
3 жыл бұрын
We have a 6x14 single axle too. It is the handiest tool we own. Hauls our ATV’s, lumber, and anything/everything we can think of. Nice work and beautiful property you have.
@4x4le
4 жыл бұрын
I would rather have more tongue weight than not enough.
@XxTWMLxX
3 жыл бұрын
Tongue should always be heavier then back to prevent sway and possiblity of trailer losing control pulling vehicle off the road.
@taterhead30
3 жыл бұрын
I’d rather have tread on my tires than Honda racing slicks.. 😳
@cartertucker8915
4 жыл бұрын
You are asking for trouble putting more weight to the back. You need tongue weight for single axle.
@XxTWMLxX
3 жыл бұрын
I was thinking same thing to much in back can cause back end to swing and pull vehicle off road easily.
@cartertucker8915
3 жыл бұрын
@@XxTWMLxX I had to learn the hard way years ago. But once you get the life scared out of you. You learn real fast
@greggoett
2 жыл бұрын
More tongue weight is way way better than less. Just search on trailer tongue weight.. put the Polaris all the way up front.
@beaugreen8138
Жыл бұрын
I was thinking swap yellow & white.. also backing them on too, help load balance.
@fourbyfourer
4 жыл бұрын
That Honda 400 has seen some paved road running by the looks of the rubber.
@turtlescycle
Жыл бұрын
Good ingenuity there! You're not too far from me, just 1 County over! Hope to see you on the trails!
@robertheinkel6225
3 жыл бұрын
Storing the ramp at the rear of the trailer, and move all the machines as far forward as possible to get more tongue weight.
@outdoorztime2923
2 жыл бұрын
The trailer companies should make trailers more atv friendly. Hauling them pulled up from the side does save space and makes for a better haul while stopping and taking off.
@cdh378
4 жыл бұрын
Need to strap front of them too, ask me how I know. 😂
@beansharley2972
3 жыл бұрын
How you know lol
@garrettblackburn9386
3 жыл бұрын
@@beansharley2972 they probably rolled forward hitting the trailer and possibly breaking plastic or dented a bumper
@jamesc7925
3 жыл бұрын
I’m surprised you were able to film the video without the Polaris breaking down
@billz410
22 күн бұрын
LOL
@chancecooper4006
4 жыл бұрын
Im wondering if you could have staggered them? The only thing I see, is it looks like the heavier part of the four wheeler is on the right side of the trailer and possibly the fender is or could scrape that fender. Overall, great video brother!
@zepole87
3 жыл бұрын
You can put the middle quad pointing the opposite direction too
@toyo2502
4 жыл бұрын
Awesome, I have a 5x14 and was considering building a platform to convert to a flat bed to haul my 3 units...great, great video!
@ac-6569
2 жыл бұрын
Get a larger trailer, it will be the safest thing to do. I do appreciate your ingenuity.
@cfpau
4 жыл бұрын
That was great, I'll be doing same project myself. Thanks
@jeffshemanski3711
3 жыл бұрын
Wow never thought a 5min loading video would take over 25mins lol
@skeet25s
3 жыл бұрын
Yeah. Long winded videos are frustrating. Keep it to the point, and quit with the jaw flapping for God'd sake. Ugh.
@jeffkinder6865
3 жыл бұрын
Good video definitely helped me come up with an idea for my small trailer...... good old US 52 lol I'm in southern Ohio and live right off of 52
@IsoNurFace
3 жыл бұрын
From a safety aspect, you might be asking a lot from that single axle, specifically the weight on the tires. In the video the camera catches the tires when you had the trailer loaded up. The tire was bulging quite a bit, not sure how long the tires will hold up to highway speeds on the interstate. I like your solution overall, just keep an eye on your trailer tires on trips.
@jonnybravo9003
3 жыл бұрын
3500lb axle. All weight of the atvs are about 2,000 to 2,500 lbs. plus 800 to 1000 lbs trailer frame weight. The axle will do just fine. Weight capacity is perfect.
@emmanuelstamatakis8218
2 жыл бұрын
Came out nice. Just thinking that it would’ve been a lot easier if you just cut the rails from that one side you wanted to load it from and make them slip on slip off with a couple of screws you remove you load you lock them back up
@fourbyfourer
4 жыл бұрын
If the blue polaris is the heaviest, I would put it where the yellow Honda 400 is. That way the heaviest is over the axle. Then put your lightest at the front and the last one at the back.
@jsealey123
3 жыл бұрын
Correct I will try that
@bray1461
Жыл бұрын
Yep
@deangood8908
4 жыл бұрын
In my opinion he should have put the heaviest in the front. The lightest in the middle and the last one at the end. And now you have all the weight of all three four wheelers on one side of the trailer. NOT VERY SAFE IN MY OPINION.
@IsoNurFace
3 жыл бұрын
I use to pull triples (3 28' trailers) for a freight company. Heaviest is always up front then next heaviest and so on. That way you won't fish tail or snake and you will maintain control of your vehicle easier.
@skeet25s
3 жыл бұрын
@@IsoNurFace You're right. Weight in the back will cause trailer whipping. That experience is terrifying.
@boobylinks
Жыл бұрын
By putting planking on the top of the bottom three you can stack three more ATVs.
@Starter122484
4 жыл бұрын
Given the task of not buying anything, the only change I would make is crossing your trailer chains.
@Trialsrider112
3 жыл бұрын
I believe crossing chains is the law
@Robsksas
3 жыл бұрын
For sale...ford explorer...ran when parked....hauls 3 fourwheelers....over heats and needs transmission. Cheap!
@kennethgrimes5494
3 жыл бұрын
Just cut the trailer rail at the front left side and bolt some hinges on so you can raise and lower the side rail just like your tail ramp.
@mike93lx
3 жыл бұрын
The rails are a key structural part of these angle iron trailers. They have very little strength without them welded in place
@KsAdventures
3 жыл бұрын
I think you did a good job overall. But I think I would put on a trailer jack wheel. Easier on the back and easier to line up.
@guntech59
4 жыл бұрын
I wonder how close you are to the trailer's GVWR.....if you're not already exceeding it.
@KsAdventures
3 жыл бұрын
He's fine.
@JeffLevyForPresident
Жыл бұрын
@@KsAdventures you've seen the sticker?
@Cuzog23
3 жыл бұрын
Man up. Buy a truck one in the back two in the trailer.
@BroBob1254
4 ай бұрын
Good idea! I'm wondering if your over loading that single axle trailer? What is that Trailer rated for?
@comanche12341
3 жыл бұрын
Jayden. You’re the man!
@Dachamp2001
6 ай бұрын
I hope you add trailer brakes thats a good bit of weight back there
@mushrumhd
3 жыл бұрын
Is there any worry about the weight being set on the driver’s side? Seems that that could have some weight issues there. Just a thought
@oliverlindgren1548
3 жыл бұрын
You are hauling heavy with that suv man but what you did was pretty cool.
@jeremyruff7961
3 жыл бұрын
Automotive service ramps work great.
@runningscout14
3 жыл бұрын
I would much rather be tongue heavy than tongue light. Swap the blue and white ones. I also would not be a fan of the quad sitting on the 5/4 boards.
@jimbowling983
2 жыл бұрын
What part of WV are you from? I’m in greenbrier county.
@ant2464
Жыл бұрын
This was awesome
@carlandrews3475
3 жыл бұрын
Your safety chains are supposed to be crossed a few times so if it falls off the ball that's what it's there for
@danlux4954
3 жыл бұрын
Build a structural tonneau cover for it and load them on top.
@billypirtle1443
2 жыл бұрын
If you're trailer is 14 foot long you can put two on there sideways and the other one straight on. I have got a 6.6 ft wide by 14 foot long and haul 3 atvs on it all 3 are 450 formans with no problem.
@wilsonoriginals7842
2 жыл бұрын
Overloaded the vehicle, overloaded the trailer, and loaded the trailer wrong. This is very unsafe
@Mroffroadrecovery
Жыл бұрын
no problems with tires rubbing fenders?
@ErnestChristman-ui2ky
6 ай бұрын
Blue one should have been in front
@stevepataska8373
18 күн бұрын
Straps on the inside and weight toward the front next time bud…
@kennethgrimes5494
3 жыл бұрын
By the way you are just begging to roll that trailer and you want more tung weight not on the rear of it.
@kennethgrimes5494
3 жыл бұрын
Best of luck.
@juliosdiy3206
2 жыл бұрын
Nice!
@ryann5818
3 жыл бұрын
Pallets work good for that
@escorpion6.728
Жыл бұрын
Whats the wide size?
@jeffmiller4053
3 жыл бұрын
I live in Lincoln county not too far from there
@MOAB-UT
3 жыл бұрын
Not safe. If I had to do something like this for a short term solution, I would just cut the trailer. The best solution is to simply buy the correct size trailer- not just for loading but for correct tongue/overall weight distribution. With all three on an angle, there are various issues including more weight to the downhill side of the trailer. Also, one of the ATV's was barely on the wood. Also, always wear a helmet even for something as simple as loading.
@michaelbarnes257
3 жыл бұрын
I would have just stood them up on end heavy one in the front.
@chumps7974
3 жыл бұрын
I've seen that. I like that strategy a bit better
@dsmtsi
3 жыл бұрын
How don't you stand up the 4 wheelers on end by yourself?
@WhoDaBoss-dc4or
Жыл бұрын
Car ramps inside the trailer
@jb4950
3 жыл бұрын
What size is your trailer?
@boobylinks
Жыл бұрын
One ATV too small of a size.
@bigtim1213
3 жыл бұрын
Why not cut the rails off and load one from the side
@Lithorock
2 жыл бұрын
The rails are part of the structural integrity when welded
@bigtim1213
2 жыл бұрын
@@Lithorock not really there more of load securment if hauling something that will roll around the structure integrity in the frame of thr deck
@cjaq7391
3 ай бұрын
You actually loaded those wrong. To prevent sway, weight should be to the front of the trailer not rear. Completely wrong
@kaseycasece1340
3 жыл бұрын
YOUNG MAN , ALL U NEED LIGHT C - CHANNEL
@honeybadgerdontcare8389
4 жыл бұрын
what size is the trailer
@gawzitup6901
4 жыл бұрын
6x14
@stellaredruby2003
3 жыл бұрын
Where safety takes a back seat, unfortunately I drive this road on my way to HMT in Gilbert West Virginia, I just hope I don't come across this unsafe individual on the road or the trails. OMG!!!!
@reopenthisemail4912
3 жыл бұрын
Cross your chains!
@jeffmiller4053
3 жыл бұрын
I want a 7x14 Bridgeport equipment has them for $1599
@darryldoesit966
2 жыл бұрын
looks dangerous to me...its time to roll the trailer !!! Just get a longer trailer...
@jameswallace3226
3 жыл бұрын
Bud I done this 15 year's ago. Nothing new.
@caseysimon6357
3 жыл бұрын
Where’s your instructional video..? Show him up... 🤷♂️
@jameswallace3226
3 жыл бұрын
@@caseysimon6357 i don't have any proof but I welded me up a set of rails that bridged across my rails on my trailer, and I drilled holes and locked them in with a pin. Worked great.
@albuu1846
3 жыл бұрын
@@jameswallace3226 could you please explain this better? I'm looking for options to haul 3 atvs. Thanks!
@benny8300
3 жыл бұрын
Would have done it different bigger trailer
@brentfriddle6877
3 жыл бұрын
What size trailer?
@adamandmary2008
3 жыл бұрын
6x14
@travelteam89
2 жыл бұрын
You can put a trailer lock on it so cant steal it......
@kaseycasece1340
3 жыл бұрын
YOUNG MAN , MY HONDA WEIGHT 5 9 6
@georgegouvas27
2 жыл бұрын
and your tires are probably not legal for the weight rating.
@ARbob8953
4 ай бұрын
Great job
@tonydamato4313
2 жыл бұрын
I mean you got it figured out, but that trailer is over payload capacity, im sure it worked out for you but I dont advise doing things like that.
@jonathanproffitt1227
2 жыл бұрын
Definitely not over payload
@brianvassar2556
3 жыл бұрын
Strap the ramp to the trailer
@luisarmendariz2351
3 жыл бұрын
Muy bien 👍👍👍👍👍👌
@damfast
Жыл бұрын
That doesn’t look safe at all.
@caseysimon6357
3 жыл бұрын
...intermittent signal lights... must be a ford thing. 🤷♂️
@cristianmotoran
3 жыл бұрын
i never seen a gay clever . Fantastic
@torandochesteen7816
3 жыл бұрын
Put the blue on the nose
@andigendell3816
3 жыл бұрын
hi
@cableguy7580
8 ай бұрын
Everything about this is cringe!! What if you need to make any evasive mauvers or slam on the brakes?! What if the trailer has a blowout? Yard sale!! Im reminded of the saying "Just because you can, doesn't mean you should!! 😬
@williamb2309
3 жыл бұрын
harbor fraght moving dollys $7,00. mody trailer to be side load! dollys side bikes to center'
@albuu1846
3 жыл бұрын
Could you please explain this better? I want to make sure I understand correctly. I also have 3 atvs to load and am looking for the best way to do it. Thanks!
@georgehinrichs4881
4 жыл бұрын
Could have just cut the rail off the trailer on one side then you wouldn’t need the ramps
@gawzitup6901
4 жыл бұрын
On this style trailer the sides are the main support for holding up the weight of the trailer. If the side was cut off the angle frame wound bend or break. Thank you for the comment though.
@kennethgrimes5494
3 жыл бұрын
Thats what i said simple fix maybe its because i been a welder fabracator for 35 years.lol
@kennethgrimes5494
3 жыл бұрын
@@gawzitup6901 support it with another peice of channel under it simple fix i mod them all the time easy project if you know what your doing been a welder fabracator for 35 years now and never had any problems with any thing
@albuu1846
3 жыл бұрын
@@kennethgrimes5494 Do you sell them? Where are you located?
@kaseycasece1340
3 жыл бұрын
YOUNG MAN , U GOING HURT YOURSELF AN ANY ONE ELSE / ALL U NEED IS 12 " X WIDE OF THE TRAILERS C - CHANNEL
Пікірлер: 127